Reviews Gpu Mining Motherboard 2

MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU

  • Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
  • 110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
  • 8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
  • Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
  • Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....
Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock

SHANGZHAOYUAN B250 BTC-12P Mining Motherboard (Intel 6th/7th Gen) LGA 1151 Motherboard with 12 PCIe Slots, VGA+DVI, MSATA, 2*DDR4, USB 3.0 for Miner (BTC/ETH/ZEC/ETC)

  • 【Superb Configuration】The Intel LGA1151 6th/7th Motherboard using Intel B250 high-speed chipset, and has stabilized capacitors that can provide a stable voltage for your electrical equipment.
  • ⚡【High Performance】The Mining motherboard 12 GPU is equipped with 2 DDR4 2133/2400/2800/3000 MHZ memory slots, up to 32GB maximum capacity. Support LGA 1151 series 6th/7th generation processors.
  • 【Mine Motherboard】Up to 12 GPUs can be connected via 12 PCI-E interfaces, maximizing your mining connectivity and speed. The B250C BTC Motherboard allows you to fire up your mining efforts.
  • ⚡【High efficiency】Fast startup, loading and file transfer. Effectively reduce interface interference and line loss to ensure data reliability, thus improving efficiency..
  • 【Exclusive for Mining】Quiet, low power consumption, low heat generation, energy-saving, safe and reliable, effectively helping to mine Bitcoin (BTC), Ether (ETC) and any other cryptocurrencies.
Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

  • ...Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
  • COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
  • supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
  • EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
  • RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
  • IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle support column not only provides better ....
Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

  • 8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
  • 2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
  • Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
  • Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
  • Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
  • Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....
Check Stock

WiFi Card,Ubit Three-Band 3000Mbps WiFi 6 AX3000 PCIe WiFi Card with Bluetooth 5.2, Wireless Adapter with MU-MIMO,OFDMA,Ultra-Low Latency, Supports Windows 10/11 (64bit) only

  • More Power Options: MOLEX, SATA and Graphic card 6PIN interface, three interface optional. Reducing the burden on the connection between the motherboard and graphics cards. Compatible with all power supply ports.whether small open air rigs or large rack based miners, and securing your investment. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin)..
  • 【Anti-interference metal shell】PCI Express risers extend the mother board PCIE X1 slot to PCIE X16 slot. Provding a safe and reliable connectivity with more PCIE X16 graphic cards. Used on Ethereum Mining rigs or GPU Mining rigs mainly. X16 GPU slot come with Anti-interference metal shell make sure data transmission..
  • Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity..
  • 5X high quality capacitors GPU RISER, The appropriate number of capacitors results in less electrical fluctuations without increasing power consumption, meaning more stable currents transient- the loads and heat losses spread across multiple cap which will prolong their life, better protect your device away from over current, heat and voltage..
  • Mini design, space saving, give your mining equipment more space for heat dissipation..
Check Stock

PCIe Riser Card Latest Adapter 6-Pin 1x to 16x For Mining GPU Riser Adapter Flexibility Extension Cable 6-Pin PCI-E to SATA Power Cable For Bitcoin & Crypto Mining Ethereum Mining ETH

  • ✅ HIGH QUALITY - Get the best quality out of your mining rig. This top-of-the-line solution for setting up crypto mining rigs. This express usb 3 riser kit supports multi gpu.
  • ✅STABILITY - 4 High performance capacitors and one stabilivolt to make the power delivery more stable, giving your gpu the support it needs to run efficiently.
  • ✅LONG SIFESPAN - With the use of gold plated contactors, this makes it ensure durability and flawless connectivity. Sata to usb cable bitcoin miner and altcoin mining.
  • ✅COMPATIBILITY - This riser kit is compatible with 1x, 4x, and 8x, 16x PCI-E slot of the motherboard, dedicated for alt coin mining. Compatible with wide range of GPU.
  • ✅CUSTOMER SUPPORT - We guarantee your satisfaction or your money back. If there are ever any issues with your expectations of this product please reach out to us directly and we will be sure to fix any concerns you may have.
Check Stock

PCIe Riser Card 1X to 16X GPU Riser for Mining Rigs, 6Pin Risers with 8 PCS Solid Capacitors, USB3.0 Cable, Upgrade Version Ver010x Riser for Ethereum Bitcoin Miner Rigs (6 PCS)

  • 【Latest version: ver010x riser card for mining rigs, it features gold-plated contacts and has good performance, Anti-burn machine chip to make graphics work more safe】.
  • 【Reduce Motherboard Burden: 4pin interface and two 6pin interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.】.
  • 【The PCI-E riser card features a stable resistance, ver010x riser card for bitcoin, Litecoin and mining rig. It is has 5 LED light to display the working states】.
  • 【8 PCS high quality solid capacitors will improve power stability to GPU, keeping gpu riser mining rig devices away from overheating and over voltage.】.
  • 【Works with Most Systems】 Our VER 010X riser with a fixed buckle that make sure the graphics card will not fall off from the slot. It is compatible with 1x, 4x, 8x, 16x PCI-E slots, suitable for all Window, LINUX and MAC systems..
Check Stock

FebSmart PCIE Riser for Ethereum Mining Rigs, GPU Risers for ETH Mining Rigs, PCIE Extension Cable, GPU Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C GPU Riser, VER006C PCIE Riser (Blue-2PCS)

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 riser. The PCIE riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
  • 2. This PCIE riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on PCIE Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..
Check Stock