Reviews Flush Radiator System

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check Stock

18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket

  • ◇ Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner..
  • ◇ Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life..
  • ◇ Note ---If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
  • ◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
  • ◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel ....
Check Stock

ATD Tools 3305 10-Piece Radiator Pressure Tester Update Kit

  • Adapter update Kit to use with ATD-3300 Test Kit, 10 piece.
  • Detects internal engine leaks caused by blown head gaskets and/or cracked block or heads.
  • including radiator, heater core and radiator cap.
  • Kit includes 8 radiator adapters and 2 radiator cap test adapters to fit the most popular domestic and import cars and light trucks.
  • Kit Includes: 8 Anodized Aluminum radiator Adapters, 2 Radiator cap test adapters, Instructions, Storage and Carrying case.
Check Stock

Goplus 18pcs Universal Radiator Pressure Tester, Vacuum Pump Type Cooling System Kit for Universal Vehicles

  • 【Durable Material】This tool is made of high quality aluminum, rubber and plastic, high strength and good toughness. It provides increased stabilizes for longer service life..
  • 【Convenient and Helpful】This universal radiator testers help to detect the cooling system leaks, which is easy to use in preventing the unnecessary damage caused by water leakage. With the vacuum pump, it shortens the time of refilling new coolant by creating a vacuum, without undergo time-consuming air bleeding..
  • 【Wide Application】There are 8 radiator cap adapters included, and the test range is from 0 to 35 psi, ideal for domestic and import vehicles. With the special design of vacuum purge and refill tool connection, it fits nearly all type of radiator openings..
  • 【Easy to Use】This radiator pressure tester and vacuum type cooling system kit allows easy testing for leakage in radiator system and quick change of coolant. It will definitely save your energy and time..
  • 【Easy to Carry】The weight of this set is very light and it comes with a black plastic box, which makes it convenient for you to bring and storage..
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock

Honhill 28pcs Universal Radiator Pressure Tester and Vacuum Type Cooling System Kit

  • ????28pcs Universal Radiator Pressure Tester and Vacuum Type Cooling System Kit..
  • ????Allows easy testing for leakage in radiator system and quick change of coolant..
  • ????Special design of vacuum purge & refill tool connection, test Range 0 – 35 psi..
  • ????One more adaptor than 27pcs kit suitable for domestic and import vehicles.Every tool is in its place, protected from damage and ready for your instant use..
  • ????This universal radiator testers help to detect the cooling system leaks, which is easy to use in preventing the unnecessary damage caused by water leakage..
Check Stock

LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car

  • OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
  • MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
  • Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
  • WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
  • INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..
Check Stock

MASTERCOOL 43301 27 Piece Master Radiator Pressure Test Kit

  • Detects and exposes external system leaks.
  • Detects internal engine leaks due to blown gaskets or cracked block.
  • Vacuum type cooling system, Purge and refill for quick change of coolant, Test Range: 0 - 35 psi, Includes 1 blue radiator cap test connector....
  • Includes 1 black radiator cap test connector R123/R124 Includes 1 thermometer, 1 universal radiator cap, 1 vacuum purge and refill tool, coolant hose....
  • Includes hand pump and 19 adapters (No. 's 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) to fit most popular domestic and....
Check Stock