Reviews Fitting Valve 1

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.

Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
Solenoid-operated first automatic valve opens on thermostat call for heat.
Diaphragm-operated second automatic valve opens under control of regulator.
closes if gas or power supply is interrupted.

Hot Rod Polished Oval Finned Valve Cover PCV Breather W/ Grommet.
Our PCV breather features a common replaceable PCV valve with a barbed fitting for 3/8 Inch hose.
Includes 1-1/4 grommet to fit most after market valve covers.
Easily maintained with a washable filter element.

...s；Quarter turn handle,ensure you control the water flow at will..
【Suitable for various thicknesses of countertop】:The long screw design under the countertop is suitable for various thicknesses of countertop(the max thickness is 1.49inches/3.8cm)..
【Suitable for various filter outlets】: With 2 size of quick fitting(1/4''quick fitting -1/4''quick fitting, 1/4''quick fitting -3/8''quick fitting) suitable for different reverse osmosis systems or water filtration units.Lock washer wing nut,allows you to easily fix without using any tools..

Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....

Top Feature: Large 13mm Flow Port (7GPM), Large 3.5 inch Stainless Steel Handle. Freeze Proof.
ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN..
3/4" Solid Brass Quarter Turn Valve w/ Brass Female 3/4" Bulkhead Fitting.
FEATURES: Lead Free Compliant Brass, Quarter Turn Ball Valve, Large 3.5" Stainless Steel Handle, Stainless Steel Nut, Freeze Resistant, Large Flow Port(7 GPM tested with 2 ft water), Recessed Rubber Gasket won't Pop Out.
SPECS: Bulkhead fitting need 32mm or 1-1/4 inch diameter hole to install. Fit up to 0.4 inch Thickness Wall(Works great for 55 gallon used plastic drum barrels on craigslist). Large 13 mm Port, Heavy and Heavy Duty, Net Weight: 11.5 oz.
Compare Design, Compare Material, Compare Weight, Compare Build Quality, and Choose RAINPAL, Life Time Warranty Against Leak, Break or Crack..

Brand New Retro Script Polished Aluminum 1-1/4" PCV Breather, Compatible with Valve Covers with a 1-1/4" Breather Hole. This PCV Breather is produced by Billet Specialties Inc. (Part #21923).
Draw the attention to your engine compartment with this Retro Billet Specialties Script polished aluminum PCV breather. This Billet Specialties breather fits smoothly in the valve cover and is easily maintained with a washable filter element, and features a unique 2 piece design with a positive o-ring seal..
Features: Retro Script Polished Finish | Replaceable PCV Valve with a barbed fitting for 3/8" hose | Precision machined from 6061-T6 billet aluminum | Easily maintained | 1-1/4" diameter for valve cover | Made in the USA.

Commonly used when valve springs or valve stem seals are replaced.
Comes with two-step fitting for both 14 millimeter and 18 millimeter threads.
Thread fitting to spark plug hole and other end to air supply.
Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.
Air pressure helps prevent the valve from falling into the combustion chamber.

BLADEX DOUBLE WASTE VALVE ASSEMBLIES - 1-1/2 Inch and 3 Inch rotating valves on one collector fitting.