Reviews 1 pc Industrial Ball Valve

NOMAL Brass Float Valve 1/2 inch Float Ball Valve Automatic Fill Adjustable Float Ball Valve for Livestock Waterer, Water Tank, Aquariums

  • Size: 1/2" thread, can fit many pipe connection.
  • No Leak: This float valve is sealed with rubber washer to ensure no leak.
  • Easy to Use: Very easy to install and operate, you can adjust the water level by rotating the metal wingnut or the green float.
  • Widely Used: Brass float valve can be applied for water trough, water tanks, livestock and poultry waterer, pools, aquariums, aquaculture, reservoirs and industrial, et..
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

1/2' NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON from U.S. SOLID

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4 Brass Electric Solenoid Valve 110V AC Normally Closed Water air Diesel by U.S Solid

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • ...e arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requirements of the water level, automatically control the water level, no power or pump is required, the water float valves are applicable for low pressure gravity water supply systems, hand tightening for leak-free operation.
  • What you receive: 4 pieces of water float valves in white, sufficient quantity can satisfy your daily use, will bring you a nice using experience and bring a lot of convenience to your life.
Check Stock

SANKUU 2 Pack Brass Hose Shut Off Valve, 3/4 Inch, with 4 Extra Rubber Washers

  • SUPER VALUE: Package includes 2 Pcs garden hose shut off valve and extra 4 pcs rubber washers..
  • HEAVT DUTY METAL CONSTRUCTION: Hose valve is made of solid brass, stainless steel ball shut-off..
  • Hose shut off valve adopts large brass handle, which is in line with ergonomics and is more comfortable to use..
  • SAVE WATER RESOURCES: Garden hose shutoff valve can adjust the flow of water and save water..
  • WIDE APPLICATION: Standard 3/4" Brass Shut Off Valve fits all the 3/4" garden hoses thread watering equipment. Ideal for golf courses, sports fields, industry equipment, landscape and other industrial applications..
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

Hromee Air Hose Fittings 1/4 Inch NPT Brass Quick Connect Coupler and Plug, 20 Pieces Air Compressor Accessory Kit with Blow Gun and Tire Gauge

  • QUICK-CONNTECT FITTINGS - There are various 1/4” NPT industrial connectors you need for air compressor in this kit: 2PCS MNPT Plugs, 2PCS FNPT Plugs, 1PC MNPT Coupler, 1PC FNPT Coupler. The quick connect design make you can change the connections with one hand quickly..
  • CLEAN-UP TOOLS - The clean-up kit includes a blow gun, a tapered tip and a rubber tip. The blow gun, made of zinc alloy, delivers powerful air flow especially for clearing up messy spots or drying jobs. The rubber tip can protect the delicate surfaces from damage..
  • INFLATING TOOLS - Dual foot tire chuck is used for inflating, deflating and measuring tire pressure accurately and easily. The pencil tire gauge measures 10-50 PSI to ensure tire properly inflated. 2 needles are to inflate pool toys, sports balls and air mattresses. The ball foot chuck has a built-in shut-off valve..
  • HOSE REPAIR KIT- One brass hose barb with 1/4 in. and 1/4” MNPT fitting to replace damaged hose ends. One brass double barb for splicing hoses to fix damage in the middle of the hose. Stainless-steel high tension hose clamps are easy to use and provide a tight and secure hold for 1/4 inch to 5/8 inch (0-16 mm) hoses..
  • DURABLE BRASS - This kit includes all accessories you will need to pair with your tools to get....
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock