Reviews Extension For Lathes

MAX-CRAFT Wood Brad Point Drill Bit Set 1/8 in Spur Point Woodworking Drill Bits-20Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Wood Brad Point Drill Bit Set 1/8 in. Spur Point Stubby Woodworking Twist Drill Bits-10Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

  • Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
  • Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
  • Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
  • Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
  • Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.
Check Stock

Woodcut Tools Bowlsaver Complete System with Two Blades for Coring Bowl Blanks 3 to 12 on Woodturning Lathe BSVR

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
  • USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....
Check Stock

Max-Craft 5/32 -Inch 10Pcs Brad Point Wood Drill Bit Brad and Spur Point Wood Drills with Special Brad-Point tip Drilling for Hardwood or Softwood 5/32-10pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 5/32" (Diameter) x 2-61/64"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

VEVOR Davit Crane, 1100lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • 【MAX. 1100 LBS CAPABILITY】- The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 1,100 pounds of lifting. At full extension, the components are 68" length and effectively support up to 500 pounds..
  • 【MANUAL HYDRAULIC PLUNGER】- The truck crane hoist is equipped with a hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • 【Q235 STEEL & SPRAY PAINT】- The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 【360°BASE SWIVELS】- The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • 【EASY TO STORE & OPERATE】- Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, s....
Check Stock

VEVOR Davit Crane, 2000lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • Max. 1000 Lbs Capability: The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 2,000 pounds of lifting. At full extension, the components are 68" length and effectively support up to 1000 pounds..
  • Manual Hydraulic Plunger: The truck crane hoist is equipped with a 16" hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • Q235 Steel & Spray Paint: The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 360° Base Swivels: The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • Easy to Store & Operate: Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, ships, suitable for const....
Check Stock

Linear Guide Rail 2 X HGR 20-1000mm Linear Slide Rail + 4 X Bearing Blocks Linear Guideway Rail for DIY CNC Routers Lathes Mills

  • HGR20 1000mm Linear Guideway Rails: Rail width 20mm, Rail Length 1000mm..
  • HGR20 Linear Rails Advantages: Helps to build economical linear guiding system and designed to achieve high precision linear motion, low friction coefficient. 4 bearing pillow blocks with smooth sliding..
  • High-Quality Material and Long Service Life: Linear bearing rails made of quality bearing steel. Beautiful and anti-rust surface treatment ensures durability, high hardness, and stiffness..
  • Easy to Assemble: Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, less effort for maintenance..
  • Wide Application: Grinding machine, milling machines, lathes, drilling machine, and comprehensive processing machines, discharge manufacturing machine, boring machine, line cutting machine, precise measurement instrument, woodworking machinery, handling machine, shipping device, DIY CNC routers lathes mills, and more automated machines and equipments..
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • ... wrench to quickly change the replacement jaw,allowing you to focus on your creation without tedious steps..
  • 【WIDE RANGE OF APPLICATION】- FJL FORCE 4In lathe chuck is suitable for daily workpiece production,spindle and other large wood lathe projects,with 1'' x 8TPI to 3/4" x 16TPI adapter can be used in general lathes,grinders,milling machines and most wood lathe general lathes and industrial machinery lathes on the market..
Check Stock