Reviews Exhaust Pipe Clamps

2.5 Inch 2 Bolt Exhaust Flange Exhaust Gasket Connection Kit for for Exhaust Stainless Steel 2.5 2 1/2 63mm -1 Pcs Flange & 1 Pcs Gasket

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

Exhaust Muffler Pipe,Keenso Motorcycle Exhaust Middle Link Pipe Slip On Exhaust Adapter Connector

  • 【Material】The Universal Motorcycle Exhaust Aesthetically pleasing carbon fiber finish which made with Aluminum+Stainless steel，Reducing Overall Weight For Top Performance To Obtain Max Output.durable, corrosion resistance and rustproof..
  • 【Suitable for Various Bike Styles】：It is a universal slip on exhaust muffler that works with various bike including dirt bikes, street bikes, scooters, ATVs, quad and other bike with pipe diameter 38 mm to 51 mm. This is made possible by its welded stainless steel adapter which enables it to seamless blend fit pipes from 38mm to 51mm.
  • 【Great Sound 】Great sounds With a removable DB killer for changing sound. you can hassle-freely to make it super-loud when you remove DB killer, and you can also put the DB killer in to minimize the sound produced..
  • 【Specification】Overall Length: 365mm,Connection: 51mm Slip-on type.
  • Motorcycle Unversal Exhaust Slip on Silencers & Mufflers ,1.5-2" Inlet Stainelss Steel Motorcycle Exhaust Muffler Slip on.
  • 【Warranty】:Manufacturer warranty for 90 days from date of purchase.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

2PCS Exhaust Clamps 3 Inch Butt Joint Exhaust Pipe Muffler Clamp Band Stainless Steel Connection for Cars

  • Size: We offer you 2pcs exhaust clamps, which you can measure better before you buy. These fixtures feature a unitary construction that minimizes part count and maximizes material efficiency and weight..
  • Material: The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket exhaust systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • Flexible Disassembly and Repair: The butt strap clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Satisfied Customer Service - Both product quality and payment, will always be guaranteed. We are responsible sellers, always providing high quality products a....
Check Stock

Besiter Dryer Vent Hose, Dryer Hose 4 inch, Flexible Dryer Duct Hose, Dryer Exhaust Hose with Aluminum Foil 5 Feet, Portable Dryer Vent Pipe with 2 Clamps and 1 Tape

  • High Quality with Great Aluminum Foil: Besiter dryer duct is made of high quality aluminum foil to keep your ventilation system free of rips and pin holes, the interface of dryer duct is reinforced with plastic, built-in steel wire,not easy to deform,better support and stability..
  • Perfect Attachments: Besiter dryer exhaust hose comes with 2 Stainless handle Steel Clamps and1 Roll of aluminum foil 120-ich length tape.No need for a screwdriver anymore, just use the handle to tighten the hose and clamps and use tape paste up ducting to fit vent pipe what you need, more convenient..
  • Widely Used: Besiter 4 inch dryer vent hose has two specifications: 5 feet and 8 feet ,these flexible ducting will be right on your Duct Fan, Vent Exhaust, Carbon Filter , duct work system, Kitchens(cooking exhaust), Bathrooms(Smell and Moisture Exhaust), Greenhouses（Air Circulation）, Grow rooms（Exhaust and Light Fixture Cooling）, Grow tents,Dryer Rooms, Laundry, etc, to provide a good environment for you..
  • Warranty Guarantee:You will receive excellent first-class service. If you have any issues when using the Besiter dryer tube ducting,please don't hesitate to contact us,we are online 24 hours and can provide you with technical guidance,. Besiter will provide you with ....
Check Stock

Krator 2.25 Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48 Straight 90 Degree 45 Degree 180 Degree U-Bends Pipes

  • Universal kit includes all the necessary 2-1/2" exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • Natural, anti-rust coated finish. Constructed of mild steel.
  • Each pipe is expanded on one end to allow easy installation.
  • 4X180 Degree U-Bends. No clamps or hangers are included..
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock

Slip-on exhaust by Musarri for Kawasaki Ninja 250 / Ninja 300 - Black 2008-2017

  • Polished Stainless outlet with Anodized Black Aluminum body.
  • ASI304 Stainless Mid-pipe (applicable models).
  • Fitment: 2008 – 2009 – 2010 – 2011 – 2012 – 2013 -2014 – 2015 – 2016 – 2017 Kawasaki Ninja 250 / Ninja 300.
  • Kit includes everything for easy 10-15 min installation – Exhaust, mid-pipe, clamps, bolts.
Check Stock