EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs
- Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
- Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
- Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
- Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
- EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock
Stainless Steel Car Exhaust Tip, 2.5″ to 3.3″ Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Blue/A Style)
- Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
- Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
- Size: The size of the tail pipe is 2.5″ x 3.3″ x 5.5″. It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
- Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It’s easy to do it yourself in just 5 minutes!.
- Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..
Check Stock
UPOWER 3" Inlet&Outlet Exhaust Resonator,16" Overall Length Center Straight Through Stainless Steel Muffler,Polished
- 3'' ID EXHAUST RESONATOR: Inlet: 3" inner diameter - Outlet: 3" inner diameter - Overall Length: 16" - Body length: 12" - Body type: 4" round performance resonator - style: Both ends can be inlet, no inlet or outlet difference. Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
- FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
- PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
- INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
- WARRANTY: Upower provides 365-days warranty for each resonator muffler. Before purchasing, please make sure the ....
Check Stock
ARES 15009 - Exhaust Pipe Cutter - Cuts 3/4-Inch to 3 1/4-Inch Tailpipes and Exhaust Pipes - 15 Blade Design for Easy Cutting - Suitable for On- and Off-Vehicle Use
- SPECIFICATIONS: Our Exhaust Pipe Cutter is designed to cut 3/4-inch to 3 1/4-inch tailpipes and exhaust pipes and features a cutting wheel blade on each of its 15 rollers..
- DESIGN: Made of Chrome Molybdenum Steel, the adjustable chain uses up to all fifteen of its blade wheels to quickly and easily cut pipes. Thanks to its low-profile design, this tool is suitable for both on-vehicle and off-vehicle use, and with its ergonomically designed cushioned handles, you'll be able to maintain a safe and comfortable grip while cutting..
- COMMON APPLICATIONS: This exhaust pipe cutter is perfect for work in tight and confined spaces and can be used on-vehicle for ultimate convenience, but works just as well off-vehicle for better leverage. If you're working on a tailpipe or exhaust pipe between 3/4-inches and 3 1/4 inches in diameter, this exhaust pipe cutter is right for you..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Exhaust Pipe Cutter, simply contact customer service for troubleshooting help, parts, replacement....
Check Stock
PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle
- 【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
- Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
- 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
- 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
- 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
- Cushioned for comfort and non-slip security.
- 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....
Check Stock
SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck
- Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
- High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
- 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
- Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
- SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock
Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Multicolor/B Style)
- Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
- Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
- Size: The size of the tail pipe is 2.5" x 3.3" x 5.5". It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
- Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It's easy to do it yourself in just 5 minutes!.
- Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..
Check Stock
Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Silver/A Style)
- Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
- Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
- Size: The size of the tail pipe is 2.5" x 3.3" x 5.5". It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
- Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It's easy to do it yourself in just 5 minutes!.
- Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..
Check Stock3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)
- 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
- 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
- With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
- Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
- Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock 
