Reviews Evf Mount Smallrig

SMALLRIG Adjustable Camera Monitor Mount with NATO Clamp for DJI RS 2 / RSC 2-3026

【FOR DJI RS 2/RSC 2】SmallRig Monitor Mount 3026 is specially designed for DJI RS 2/RSC 2 gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc..
【FIRM LOCKING】The monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling..
【165° TILT RANGE】SmallRig 3026 is adjustable for 165° and can be stopped at any angle without tools. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer..
【MULTIPLE MOUNTING OPTIONS】There are two 1/4"-20 threaded holes on top of the monitor mount, and one 1/4 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc..
【HIGH CUSTOMIZATION】Matte surface perfectly matches with the industrial design of stabilizer. ( Please note: the max payload is 1.5kg. ).

Check Stock

SMALLRIG 1/4' Camera Hot Shoe Mount with Additional 1/4' Screw (2pcs Pack) - 2059

【MINI BALL HEAD】 SMALLRIG Mini Ball Head Mount 2059 is designed to attach the camera tightly via a cold shoe adapter, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut..
【COMPATIBILITY】 The cold shoe adapter works for most cameras including Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, Kodak, etc.
【ADJUSTABLE DIRECTION】 The ball head can be adjusted into most any position.
【NOTE】 The ball head maximum load: 3 kg.
【PACKAGE INCLUDED】 The Mini Ball Head Mount 2059 is TWO PCS pack. If you need one PCS pack, please see the SMALLRIG 761..

Check Stock

NICEYRIG Camera Cage Kit for Sony A7RIII/ A7RIV/ A7IV/ A7III/ A7SIII/ A7RII/ A7SII/ A7II/ A9, with Cheese Top Handle and Cable Lock Clamp - 190

This light weight cage is compatible with A7 IV, III, II series to protect camera damaging. SD card slot, battery compartment, and all camera controls are accessed..
The built-in cold shoe on the top allows to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc. Rosette at right side is provided to mount compatible with ARRI rosette handgrip for handheld shooting..
HDMI clamp in the upper left corner to organize your HDMI cable. HDMI lock mounting interface to protect the camera HDMI port. A NATO rail is at left side. It is designed to mount nato handle and other NATO compatible accessories quick release. The plate at the bottom of the cage enables you to attach an optional Raiser Block applicable arca swiss compatible with manfrotto plate..
This DSLR camera cheese top handle comes with standard cold shoe, which bases on the top to mount magic arm, camera monitor, flash light, led light, dslr microphone, wireless gear, EVF mount. Plenty of 1/4"-20 and 3/8"-16 threaded holes on the compact of the cage provide you a wide range of flexibility in attaching accessories such as microphone, monitor, sound recorders, top handle, EVF mount, tripod plate, cheese plate..
Made of aluminum alloy, durable and lightweight..

Check Stock

SMALLRIG Lightweight Chest Pad with 15mm LWS Rod Clamp for Handheld Camera Operation - MD3183

【LIGHTWEIGHT CHEST PAD】SmallRig MD3183 is designed for reducing the sense of the weight of long-term handheld shooting, in order to make the shooting process more labor-saving and stable. If you operate your camera in the center front of your body when in handheld mode, you could add this Lightweight Chest Pad 3183 to your 15mm LWS rig for a comfortable stabilizing option..
【MOUNTS ONTO SEPARATE 15MM LWS RODS】The pad mount features a 15mm LWS rod clamp that can mount onto any standard, separately available 15mm rods, and it can slide back and forth for adjustment along the rods. You can connect the camera through SmallRig 15mm rods such as 851 and SmallRig universal baseplate 1674, support it on the abdomen or chest for shooting..
【ROTATE UP TO 150°】The rotating structure can be adjusted by 150°, and the damping feeling can be adjusted by the included Allen wrench..
【SOFT PAD】The chest pad MD3183 is made from durable aluminum and a soft foam rubber pad that presses against your chest for stability and provides a more comfortable experience for long-term shooting..
【ONE KNOB FOR ADJUSTMENT】An Allen wrench is included to adjust the tension, and a single locking knob allows you to quickly secure or remove the pad from your rig..

Check Stock

SmallRig 15mm Long Lens Support Height Adjustable Lens Bracket for DSLR Camera Shoulder Rig - BSL2680

【NEW VERSION】SmallRig lens support BSL2680 is the updated version of SmallRig lens support 1087. It is designed to take much of the weight of heavier lenses off the camera's lens mount.
【REDUCE THE PRESSURE】When connected to a cinema lens's support foot or a still photo lens's tripod collar, this lens support removes the weight stress from the camera's lens mount. It relieves the potentially damaging pressure on the camera's lens mount.
【SECURITY DESIGN】The Y shape bracket has two rubber cushions on top to increase friction and protect the surface of the lens. It also features a strap slot on each side for further security.
【QUICK ADJUSTMENT】The lens support offers 34.5mm vertical adjustment to fit most lenses. You can adjustable the height of the Y shape bracket via the centered quick-release knob.
【COMPATIBILITY】It is mounted on standard LWS-spaced 15mm rods and compatible with the lens of 50 to 140mm diameter.

Check Stock

SmallRig Super Camera Clamp Mount, Double Ball Head Adapter, Fence Desk Table Mount for Ronin-M/Insta360/Gopro, Ball Head - 1138

[High-Quality Material] This SmallRig ballhead mount clamp is made of aluminum alloy and stainless steel which is very well built and is very long-lasting. It is a perfect and study ballhead mount for people who love making videos..
[Multi-function Double Ballhead with Wide Compatibility] The 1138 muti-functional double ball head comes with a clamp at the bottom and a 1/4 inches screw on the top best for vlog/youtube/tiktok. It can mount monitor/small action camera/LED Lights/microphones/flash or any gears with a bottom 1/4" thread on its one end via 1/4" screw and then you can lock it on rod/tube/table/desk/tripod via the clamp tightened by the locking knob..
[Perfect Viewing Angle] The mounts are easily adjustable and can swivel 360-degrees which allows you to adjust your cameras at your desired angle..
[Dimensions] The side of the ballhead mount is 3.74 in length, 3.35 inches in width and 0.98 inches in height. It weighs around 0.2 kg and can take up to 1.5 kg / 3.3lb weight..
[Package Includes] The total package contains 1 x SmallRig ballhead mount clamp, with a hassle-free customer service..

Check Stock

SMALLRIG Field Monitor Holder Mount with Cold Shoe for 5 inch and 7 inch Monitor, Swivel and Tilt - BSE2346

【FOR MONITOR MOUNT WITH COLD SHOE】SMALLRIG Monitor Mount 2346 is designed to hold your monitor onto the top of the camera or other mounting systems via a cold shoe adapter, which achieves lightweight design without any accessories. It can be tightened by hands via the thumbscrew. The field monitor mount is compatible with 5 inch and 7 inch monitor.
【SWIVEL AND TILT】The camera monitor holder enables to swivel 360° sideways and tilt 140° with free-stop in any positions. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios.
【FIRM LOCKING】The field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom. The size of the thumbscrew head is increased so that it’s easy to install. Both thumbscrews features holes for hex spanner to ensure your monitor safe. It can effectively prevent twist and don’t need to worry about the monitor fall off.
【RUBBER CUSHION】This SMALLRIG camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching.
【HIGH QUALITY】The robust mount is CNC-Machined Aluminum and can support 5 inch and 7 inch monitor up to 1.2kg, which makes it lightweight and durable at ....

Check Stock

SMALLRIG Universal Wooden Left Side Handle for DJI Ronin S/Ronin SC/Zhiyun Crane 2 / Crane V2 Series Gimbal Stabilizer w/Cold Shoe, 3/8'' Locating Holes for ARRI Standard - 2222

【HIGH CUSTOMIZATION】Universal Wooden Left Side Handle 2222 is exclusively designed for Ronin S / Ronin SC / Zhiyun Crane 2 / Crane V2 Series Gimbal Stabilizer. Attached to the bottom of gimbal via two detachable screws (1/4 and 3/8 screws, perfect for RoninS). Comfortable to hold and effective to improve your shooting experience.
【WELL-BALANCED】Assist in the stabilization so you could get a better grip on your rig so as to get a better movement. With the built-in cold shoe, you can attach a SmallRig Shoe Mount 1875 (ASIN: B01M3SHVGX) to mount a monitor onto it.
【MUTILPLE CONNECTIONS】Features 1/4 threads, 3/8’’-16 locating holes for ARRI standard that allows you to attach more accessories, such as Smallrig Ballheads 2070. With the 1/4 and 3/8 threaded holes at the bottom of the handle, you can attach the original tripod or base plate (SmallRig Baseplate for Manfrotto - 1280).
【SCRATCH RESISTANCE】The rubber cushion on the bottom is helpful to protect from scratching.
【WHAT YOU GET】A Wooden Handle, friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty.

Check Stock

SmallRig NATO Top Handle with Remote Trigger for Panasonic and for Fujifilm Mirrorless Cameras 2880

Compatibility: SmallRig 2880 design for Panasonic and for Fujifilm Mirrorless cameras cage, It's compatibility for Panasonic GH4/GH5/GH5S / G9/G95/....
Control Camera Start/Stop: SmallRig 2880 to provide a comfortable grip and features record button on top to control camera start/stop. And the....
Multiple Mounting Mount: The top handle 2880 featuring multiple 1/4"-20, 3/8" -16 and 3/8" -16 threads for ARRI . And it attaches to the camera cage....
Control Cable: The NATO top handle includes cable is remote to the type C standard for Panasonic, and the front of the handle features a slot for....
Cold Shoe Mount: Built-in three cold shoe mounts, and one of which is designed with an anti-slip button allows mounting mic, light, as well as Monitor....

Check Stock