Reviews Ethernet Communication Module

VXDIAG SVCI J2534 Diagnostic Interface Supports SAE J1850 Compatible for Ford Mazda Scan Tool

VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can....
High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the....
[Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed:....
VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then....
For software installation, please feel free to contact our online customer service..

WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..

SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).

Power supply mode:3.3V external power supply, current should be more than 200mA.
USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
Control interface:The TTL level, 3.3V SPI interface.

The perfect multiple vehicle-shared trailer solution, suitable for any trailer with up to 3 axles.
Hand Held control unit in the Tow Vehicle, Trailer Power Module on the Trailer.
Wireless communication between the remote hand unit and trailer mounted power module.
Proportional braking, forward and reverse, no level adjustment necessary.Trailer braking power supplied via 7-Way Connector from the vehicle.
Compatible with tow vehicles that have multiplex wiring systems.

This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program..
It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including for Arduino/51/AVR/ARM.
With signal indicating LED, easy to observe and debug..
Pin Definitions: (1) Output (2) Vcc (3) GND.
IR Infrared Transmitter Module Ir Digital 38khz Infrared Receiver Sensor Module For Arduino Electronic Building Block.

UART communication board, XBee interface, USB interface.
XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..

Product Description NETGEAR ProSafe FS105 10/100 Desktop Switch - switch - 5 portsDevice Type Switch.
Form Factor External Dimensions (WxDxH) 6.2 in x 4.1 in x 1.1 in Weight 1.3 lbs.
Localization English / Canada, United States Ports Qty 5 x Ethernet 10Base-T, Ethernet 100Base-TX - NOTE: THIS PRODUCT CANNOT BE SHIPPED TO....
Data Transfer Rate 100 Mbps Data Link Protocol Ethernet, Fast Ethernet - WARNING: The solder used in this product contains lead, a chemical known to....
Communication Mode Half-duplex, full-duplex - NOTE - THIS ITEM CANNOT BE SHIPPED TO MASSACHUSETTS.

Nonstandard baudrates supported with high precision.
Port buffers for storing serial data when the Ethernet is offline.
Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
Modular design for scalability / DES/3DES/AES for highly secure data transmissions.