Reviews Ethernet Serial Communication

DELL Optiplex 990 Desktop Computer (Intel Quad-Core i7-2600 up to 3.4GHz, 16GB RAM, 2TB HDD, DVD, WiFi, VGA, DisplayPort, Windows 10 Professional) (i7 16GB 2TB) (Renewed)']

Processor: Intel Core Quad-Core i7-2600 3.1GHz (Turbo up to 3.4GHz) 6MB Cache.
USB Wireless Adapter to connect Internet..
16GB DDR3 (PC3-12800) Memory (4 slots, supports up to 16GB), 2TB 7200 rpm Hard Drive, Intel HD Graphics..
ROM, USB Keyboard, Mouse, Integrated Audio, 10/100/1000Mbps LAN.
Slots: 10 x USB 2.0 ports, 2 x audio-out jacks, 1 x microphone jack, 1 x RJ-45 Ethernet port, 1 x VGA port, 1 x line-in jack, 1 x parallel port, 1 x serial communication port..
Windows 10 Professional 64 bit, Activation code is on the tower.

EASY TO USE: Connects via USB, serial, or ethernet port and is compatible with thermal transfer label rolls with 1 in core, max diameter of 5 in, and....
This listing is for Model#: GX43-102410-000 - which supports USB, Serial and Ethernet Connectivity - This model DOES NOT support Parallel....

FTDI based USB to serial communication cable to connect your training equipment to computer USB port. Works with both Mac and PC..
Enables direct connection to computer USB port. Eliminates the 9-pin serial port adapters.
Superior FTDI technology based USB to serial adapter solution. Plug an play and no driver installation required.
Cable length is about 6 feet . Easily extendable with USB extension cable.
Rugged design with overmolded USB housing. Cable USB has two LED lights for data traffic indication..

2-port PCI express serial card turns a PCI-E expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Mac OS, Linux, etc.
PCI-E 1.0 a specification, Standard 16C550 UART signal.
PCI express combo card bracket with two RS232 serial interface uses WCH382 chip, high speed data communication transfer rate up to 250 Kbps.
Standard-height PCIe card bracket design allows the PCI to serial card to be installed in virtually any desktop computer case (full profile computer chassis).
An ideal serial expansion PCIe card adapter for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, hard drive, radio system, etc (If need driver installation guide , pls contact us directly via the order page.).

Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network. Dimensions: 3.54"H x 1.4"W x 2.4"D..
High-impact plastic for durability. Media type supported: Twisted pair..
Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits. Interfaces/ports: Network (RJ-45), RS-232/422/485 serial..
Form factor: DIN rail-mountable. Connector type: Terminal block (screw)..

This product do not include user manual, if you need, we will send the pdf file to you.
HF2211 is a low-cost serial device server,which function is to realize bidirectional transparent transmission between RS232/RS485/RS422 and WiFi/Ethernet..
Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps.
MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos.

Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.

1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
standard shielded DE9 male RS232 cable with AL foil.
DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.

RS-232 GENDER CHANGER FEMALE: The DB9 gender changer converts a DB9 9-pin male connector into a DB9 9-pin female connector and will work with any serial devices..
MINI DB9 CONNECTORS: 2 x Serial DB-9 (9 pin) Female Gender Changer. 9 way Female / Female Connectors, 9 Pin Serial RS232 gender Changer..
PLUG AND PLAY: No power needed. Tight and stable structure, small resistance transmission stability..
RANGE of USE: The gender changer can be used with PC, modem, printer,scanner,cashier,POS machine and more DB9 serial communication equipment..
WHAT YOU GET: You will get 2- year warranty once you buy DriverGenius RS232 DB9 gender changer female to female..