Reviews Ethernet Breakout Board

DAOKI 2 pcs 1.7-5V LSM6DS3 Module 6 Degrees of Freedom Breakout IIC/SPI Transfer Digital Sensor Vibration Sensor Module Acceleration Sensor Accelerometer Gyro Embedded with Dupont Line

【Application configuration】: Each LSM6DS3 Breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DS3 Breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature!.
【Basic features】: The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 we've created this small breakout board just for you!.
【Special Note】: Please be aware that the LSM6DS3 is a 3.3V device so that powering voltages above ~ 3.6V can permanently damage the IC. A logic level change is required for any development platform operating at 5V..
【Data accuracy】: LSM6DS3 is capable of reading accelerometer data up to 6.7 kS / s and gyro data up to 1.7 kS / s for more accurate motion detection..
【Original manufacturing】: 100% of our products are made of original electronic components, please rest assured to buy and use.

MULTIPURPOSE ETHERCON CABLE – High Quality Shielded CAT6 Ethernet Cable Is Perfect for Studio Setups, Touring, Stage Production, Concerts & Other Applications.
COMPATIBLE WITH LYXPRO XLR MULTI NETWORK CONNECT – Connect to 4-Channel Breakout Adapter to Streamline Separate Channels & Keep Cables Neatly Organized & Protected.
CLEAR, BALANCED SOUND – Meticulous Engineering Ensures Reliable Connection, Minimizes Interference, Eliminates Hum & Transmits Signal with Crystal Clear Detail.
EXTREME DURABILITY – Heavy Duty Components Include Industry Standard Gold- Plated Contacts, OFC Solid Core Conductors & Extra Rugged Protective Jacket.
LONG-LASTING PERFORMANCE – Specially Designed for Fast, Easy, Repeated Setup & Breakdown.
Satisfaction Guaranteed with Limited 5-Year Warranty.

Only suitable for 38PIN narrow version ESP32 without mounting holes, not suitable for other versions..
This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
2 TYPE CONNECTIONS， Pin Header & Screw Terminal. Just select them according to your purpose..
The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission..
The board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use..

Pay attention to : 1.When you open the IDE software, could you please go to the tool and choose the board.
This board connects directly to the FTDI Basic Breakout board and supports auto-reset..
On-Board Micro-USB connector for programming.

6 Axis Ethernet SmoothStepper Motion Control Board with Terminals control board.
Ethernet SmoothStepper Motion Control Board with Terminals.

With this USB breakthrough, you will finally be able to integrate the USB-C connector into your project without soldering every tiny SMD pad.
This upgraded USB-C breakthrough board has powerful power, three times the power of the previous USB. The breakthrough board adds resistance to the original foundation.
This USB-C breakthrough board is reversible, so it also solves the general frustrating problem of USB cables.
This board introduces the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1" pitch connector, while providing up to 1.5A nominal power and up to 3A power, It depends on the upstream equipment.
Use it to replace the charging port on the astro a50 headset. It can be said to be perfect. There are positioning holes on the breakout board for easy fixation. The hole on the Type-c USB is large enough and the connector size meets the association standard..

2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....

MIkrotik CRS504-4XQ-IN 650MHz CPU, 64MB RAM, 1xGigabit Ethernet with 4 x 100Gbit SFP ports, RouterOS, L5.
Your most affordable, compact, energy-efficient doorway to the world of 100 Gigabit networking. This switch is the next step in upgrading existing 10 or 25 Gigabit networks. Multiple powering options, dual hot-swap power supplies..
The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices..
There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices..
In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. Obviously, there is an Ethernet port for management purposes as well..

DIN Rail Mount 4 x 2 Positions Banana Jack Breakout Board Module..
A and B position termianl blocks, maximum current 20 Amp (each position). Pitch 7.62mm/0.3.