Reviews Elegoo Resin 3d Printer

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....

Check Stock

ELEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³

[ ] ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference..
[+ ] The service life of the DLP projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen..
[ & - ] 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB..
[ ] The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the pri....

Check Stock

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock

ANYCUBIC Photon Mono 4K 3D Printer + ANYCUBIC 3D Printer UV Resin

ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23″ Monochrome Screen, Upgraded UV LCD 3D Printer and Fast & Precise Printing, 5.19″ x 3.14″ x 6.49″ Printing Size.
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 500g).

Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 6.08‘’ Resin 3D Printer High Light Transmittance Protective Film for Elegoo Mars 2/Mars 2 Pro/Photon Mono 133x85.5x0.33mm

The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank....
With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also....
Size: 133x85.5x0.33mm, perfect for 6.08-inch monochrome screens, compatible with ELEGOO Mars 2 , Mars 2 Pro, Photon Mono, Photon Mono SE and other....
Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective....
Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after....

Check Stock

Siraya Tech Simple 3D Printer Resin Water Washable 3D Printing Resin Super Easy to Clean and Print LCD UV-Curing Resin Needs Much Less Alcohol for LCD DLP 3D Printing (Clear, 1kg)

【SUPER EASY TO CLEAN】Siraya Tech Simple 3D printing resin is a UV resin that is upgraded and developed based on Siraya tech Fast ABS-Like resin and is easier to clean. Simple to clean with just 15% alcohol. Better results than common water-washable on the market..
【SUPER EASY TO PRINT】SirayaTech simple 3D printer resin is simpler to print than fast ABS-Like resin. Siraya Tech UV-curing resin can print quickly and has better resolution, is very easy to use and dye, suitable for new user operation..
【WIDE APPLICATIONS】Siraya Tech standard 3D printer resin works great for large format printers, like most LCD and DLP 3D printers. This simple UV 3d printing resin is more suitable for novices to print simple models and figures..
【LOW ODOR 3D PRINTER RESIN】Siraya Tech Simple resin produces little order in the 3D printing process and is not unpleasant. And our Siraya Tech 3D printing resin will not be yellowish like most clear resins, making every printed model crystal clear..
【TOUGH and NON-BRITTLE】Siraya Tech 3D printing resin is not so brittle, has an excellent combination of stiffness and toughness, making it more durable to drop, damage, and usability, and not fragile. This Siraya Tech rapid resin is strong enough to withstand that ....

Check Stock

Siraya Tech Cast 3D Printer Resin Castable LCD UV-Curing Resin Easy to Print Use and Burn High Resolution 405nm Photopolymer Resin for Making jewelries and Metal Parts (Purple, 1kg)

Easy to Use - Our Siraya Tech Cast 3D Printer Resin is easy to use, it does not require a very dry environment or special additive to print and burn well, and this castable 405nm standard photopolymer resin has good plate adhesion. Both new users and experienced users can easily print the model..
Easier to Burn - This castable 3D printer resin material contains some wax, so it is easier to burn than many non-wax-based casting resins. This Siraya Tech Cast rapid resin is very suitable to be used in the production of small metal parts, which can fully demonstrate the core of the part..
High Resolution - Siraya Tech Cast 3D printer resin uses a unique and beautiful purple color, and the printed model has a high resolution and smooth surface. Its high resolution allows the model to be printed with precise details, which will make your model look great..
Easy to Print - This Siraya Tech Cast 3D printing resin can print quickly and has a high resolution, is easy to print. This Cast LCD UV-Curing resin is very easy to use and dye, and is a castable resin for jewelers and small metal parts..
Wide Applications - Cast by Siraya Tech was developed as an affordable castable 3D printer resin by jewelers for making rings and pendants, by engineers for small metal func....

Check Stock

3D Printer Castable Resin Jewelry Liquid Casting/Wax Resin for LCD 3D Printer 1000 ml Casting Resin for All Different LCD 3D Printer

✅ Jewelry Sample Observation: Ultra precision & high-strength ensure models' detail clearly display, delicate and perfect. It suitable for....
✅ Lowest Shrinkage: Lower shrinkage and great stability significantly reduce printing time with its excellent fluidity, work excellent, which makes....
✅ Practical Material: Jewelry model printed by NOVA3D Wax Resin can directly act as pressure rubber model, thus you can get empty jewelry shape by....
✅ Better Adaptability: NOVA3D 405nm wax resin adapt to most LCD, DLP 3D printers, such as NOVA3D Elfin, Bene4, GEM, Anycubic photon, Elegoo Mars and....
✅ Quality Guarantee: We pride ourselves on providing caring service, both before and aftersales. Our support will respond to all inquires within 24....

Check Stock

Siraya Tech Blu 3D Printer Resin 1000g Emerald Blue Strong and Precise High Resolution 3D Printing Resin 405nm UV-Curing Rapid Resin for LCD DLP 3D Printer

High Toughness - This 3D printer resin is a tough resin that is easy to use. It maintains a good balance between hardness and impact resistance and is....
Wide Applications - Blu 3D printer resin has a strong and precise high resolution, so it is very suitable for use in the production of functional....
Precise Prints - Siraya Tech 3D printing resin can be printed accurately, allowing you to print the finest details, and has good fluidity, allowing....
Strong and Precise High Resolution - Siraya Tech Blu 3D printer resin has a strong and precise high resolution, which can ensure the high precision of....
Smooth Surface - This Siraya Tech Blu 3D printing resin has a unique emerald blue color, a very smooth surface, and high resolution, which makes your....

Check Stock