Reviews Distance To Sight In A Red Dot

UUQ Mini Reflex Red Dot Sight for Rifles, Pistols and Shotguns 2MOA,7 Brightness Adjustments,HD1079 Pro

  • ✔【 Multi-Layer Cortings】UUQ optics are manufactured using optical glass with multi-layer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare, making for a great addition to your tactical gear..
  • ✔【 Versatile Desigh Mounts On Pistols, Rifles, And Shotguns】The UUQ HD1079Pro Reflex Sight use integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.Alternatively, replace the original pistol physical sight with an included low profile mounting adapter and mount the red dot sight on its top.Please pay attention to the size of adapter and make sure it fits your gun..
Check Stock

Cyelee WOLF0 Micro Reflex Red Dot Sights with Shake Awake (RMR Pistol Cut) 3 MOA Reticle

  • Cyelee WOLF0 micro red dot sight is use RMR Cut footprint. Will fit any pistol mounting plate/slide/cut that is compatible with Trijicon RMR/SRO, Holosun 407C/507C/508T footprint red dots.
  • Cyelee WOLF0 feature Shake ‘N Wake motion sensing illumination tech to help save battery life. After 2 minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting. This allows daily carry without wasting battery life..
  • The WOLF0 Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. The WOLF0’s aluminum housing ensures this unit will stand up to whatever you throw at it..
  • High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the two side of the sight to choose between 10 brightness levels..
  • The Cyelee WOLF0 Red Dot will fit well on your rifle or shotgun, giving you optimal flexibility.Special design prevent sunshine, dust and debris from penetrating for reliable performance in all environments.
Check Stock

SeeKKK Berreta Red Dot Mount Mini Red Dot Sight Mounting Plate Berreta 92 Pistol Mount Base for Sightmark Vortex Venom Burris FastFire Mirco Red Dot

  • Caution -- "MOD.92FS-CAL 9MM Parabellum-PATENTED" actually means Beretta 98 FS, our mount adapter plate can not use on it..
  • Red Dot Accessories -- Lightweight, Shockproof, Weatherproof. Replaces the Picatinny mount packaged, an accessory for connecting red dots to pistol..
  • Suitable Mini Red Dot Sight -- Designed for Beretta 92 Pistol to fit Ade Advanced Optics rd3-001, rd3-02, rd3-009, Sightmark, Vortex Venom, Burris....
  • Easy to install -- Simply remove your rear sight before installing the mount base.
  • Highest Quality Material -- Full metal, heavy duty, made of 6061 T6 aluminum alloy in durable black matte finish..
Check Stock

MidTen 3-9x32 4-in-1 Scope Combo with Dual Illuminated Scope Optics & 4 Holographic Reticle Red/Green Dot Sight & IIIA/2MW Laser Sight Rangefinder Illuminated Reflex Sight & 20mm Mount (Green)

  • ...h resolution image for unlimited eye relief and wide field of view..
  • The laser sight is integrated with optics and electronics to provide a wide field of view. Three Parts with More Functions - Plus With holographic dot sight and red laser sight for quick acquisition of close quarter and fast-moving targets within a distance of about 650-1600 ft. (200-500m). Shockproof, fogproof, and waterproof with filled nitrogen..
  • Picatinny rail mount attached, easily mount to any 22mm rails (Picatinny or Weaver) with 14 Slots 1 inch High Riser Mount. Hassle free mounting to any model of equipment. We provide a comprehensive product after-sale service for your worry-free shopping. Please feel free to contact us at any time with any questions. Your satisfaction is the biggest gain for us..
Check Stock

LONJN Glock 17 19 22 23 26 27 34 Mount - Vortex Venom Mount Glock Mounting Plate Vortex Viper Mount for Glock Glock Mount Plate for Red Dot Burris Sightmark Vortex Mini Sight

  • Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
  • Fits Vortex Viper/Venom micro red dot sight.
  • Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
  • WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..
Check Stock

UniqueFire Black 3MOA Tactical Compact Holographic Reflex Mini Micro RMR Red Dot Sight Scope

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Powered by a lithium CR2032 battery.
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Check Stock

MidTen 4-16x50 Scope Dual Illuminated Optics & Rangefinder Illuminated Reflex Sight 4 Holographic Reticle Red/Green Dot Sight & IIIA/2MW Laser Sight(Red)

  • Scope Combo , comes with a rangefinder scope, a red laser sight and a red/green dot sight everything you will ever need..
  • Two color illuminated reticles of the scope: Red and Green, each of which has 5 brightness level Range Finding reticle, 4 different sizes of red/green dot sight, all of which helps to promote accuracy..
  • Red laser sight with independent switch, Class IIIA laser, less than 2mW. Detachable RED laser sight reaching over 300m, make sure you can target your focus on the highest accuracy and with great results every time, The laser sight integrated with optics and electronics provides a wide field of view..
  • Three Parts with More Functions-Plus With holographic dot sight and red laser is good for quick acquisition of close quarter and fast moving targets with about 200-500m for the distance..
  • Hassle Free Mounting: Thanks to its built-in rail(22mm), this scope easily mountable Mount( for 22mm Picatinny or Weaver rail). Windage and elevation adjustments with 1/4 MOA audible-click stops and fingertip turrerts..
Check Stock

TuFok Sight Mount Plate - G17 19 22 23 26 27 34 Rail for Install Pistol Red Dot Sight fits Bushnell Trophy TRS-25 Red Dot Sight,OTW Red Dot Sight Black

  • ✔ PINPOINT ACCURACY – The UUQ HD1079 puts an unmistakable red dot at the point of impact within your field of view, giving you an immediate advantage in speed and accuracy..
  • ✔2MOA RED DOT– 2MOA Red Dot and 7Brightness Setting,Adapt to Various Light Environments..
  • ✔ DURABLE ALUMINUM CONSTRUCTION– Rugged aircraft-grade, extruded aluminum housing ensures the optical glass and internal components are protected against firearm recoil and rough field use. Detent windage and elevation adjustments let you reliably adjust your sight with 1 MOA per click increments...
  • ✔ MULTI-LAYER COATINGS–UUQ optics are manufactured using optical glass with multi-layer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare, making for a great addition to your tactical gear..
  • ✔ VERSATILE DESIGN MOUNTS ON PISTOLS, RIFLES, AND SHOTGUNS–The UUQ HD1079 Reflex Sight use integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.Alternatively, replace the original pistol physical sight with an inculded low profile mounting adapter and mount the red dot sight on its top.Please pay attention to the size of adapter and make sure it fits your gun..
Check Stock