Reviews Diamond Micro Blade Tool

Delta Diamond Boss Hog Tuckpointing Mortar Raking Diamond Glitter Bit 4-5/8-inch Length X 1/4" Shank for Mortar Removal

  • MORTAR REMOVAL - Ideal for intricate and delicate mortar removal where a diamond blade wouldn’t fit or be too difficult to use..
  • VACUUM BRAZED - Made with premium super-abrasive vacuum brazed diamond, this bit will grind faster, last longer and cost you less than any comparable tool..
  • SPECIFICATIONS - 4-5/8" long X 1/4" shank fits on most drills. Use on a regular drill. Do not use a impact drill. Allow the bit to do the work, do not apply too much pressure, and allow bit to cool down during use to prevent bending or breaking..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock

Delta Diamond Cougar S 14 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (14\)

  • FAST CUTTING - Features a soft bond for extra fast cutting speed! Easily and effortlessly cuts reinforced concrete (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 14" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properl....
Check Stock

Delta Diamond Cougar S 16 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (16\)

  • FAST CUTTING - Features a soft bond for extra fast cutting speed! Easily and effortlessly cuts reinforced concrete (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 16" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 16" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 4,750 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 9,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properl....
Check Stock

Ettonsun 4 Pcs Diamond Oscillating Tool Blade, Flush Cutting Oscillating Multitool Saw Blades for Grout Removal, Cleaning Mortar Compatible with Dewalt Bosch Dremel Rockwell Makita Fein Multimaster Milwaukee and more

  • 【Super Value Grout Removal Tool】-- Packed of 4 pcs 1.42 inch flush cutting diamond oscillating blades, with diamond cutting edge for long life in tough applications..
  • 【Precise & Clean Cut】-- The diamond grit kerf design of the oscillating blades provides precise and clean cutting effect. Oscillating multitool blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges..
  • 【Design for Tough】-- This diamond grit oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints. It can achieve application like finishing the installation of electronics and cutting through grout, cement board and even concrete, digging out a grout job on a tile floor around some door frames, cutting panel to install outdoor outlets, etc..
  • 【Application Scenarios】-- These diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenan....
Check Stock

Diamond Machining Technology (DMT) D6EF Dia-Sharp 2-Sided Diamond Sharpening Stone Bench Plane, 6 Inch, Fine/Extra Fine

  • Diamond Wet Stone Sharpener: Offering 2-stage sharpening and a compact design, this lightweight diamond stone is great for the home, camper, tool box, gardening shed, and more.
  • Fine & Extra Fine: Fine (25 micron / 600 mesh) hones any blade or chisel to a razor-sharp edge.
  • Extra-Fine (9 micron / 1200 mesh) polishes and refines after sharpening with a coarser diamond.
  • Versatile: Engineered to provide cutting-edge performance, this 6-inch diamond stone sharpener is ideal for sharpening, polishing, and refining knives, blades, and fine tools.
  • Sharpen Faster: Micronized monocrystalline diamond surface sharpens edges faster than conventional sharpening stones.
  • No messy oils needed either — sharpen lapping plate dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
  • Double-sided blade sharpener with monocrystalline diamond surface.
  • Fine diamond on one side for a razor-sharp edge and Extra-fine diamond on reverse side to polish and refine.
  • Diamond grits clearly marked on side of stone.
  • No oil is needed-sharpen dry or with water.
  • Durable construction will provide years of consistent performance and relia....
Check Stock

4 Pack Combo 4-1/2 Inch Compact Circular Saw Blade Set with 3/8\ Arbor, 24T TCT /60T HSS /60# Diamond Disc Blade for Wood/Plastic/Sheet Metal/Tile Fast Cutting

  • Smooth & Rapid Cutting: Our masonry blade for the circular saw is designed to cut fast in most tile materials. Segment height 0.47"/12mm, arbor DM-1"/25.4mm, widened segment helps extend the blade's service life..
  • Sturdy Construction: The segmented diamond blade is made of high-performance diamond. Consistent diamond content makes the masonry blade more durable. Thinner kerf to increase the speed of cut while minimizing dust..
  • Simple Operation: Concrete blades can be universally used for dry or wet cutting. Super thin porcelain saw blade with free chips for cutting, standard 1" arbor match with the hand-held machine..
  • Complete Set: The masonry blade comes with great saw blades and reducing rings(the same number as saw blades), which can satisfy your various needs. It helps you to save time..
  • Wide Application: These marble cutting blades are ideal for general purposes, work well with concrete, stone, granite, brick, tile, and other hard materials. Whether you are a construction worker, plumber, tile installer, DIY enthusiast, this cutting tool is the perfect blade for you..
Check Stock

Smith's 50594 Diamond Precision Knife Sharpening System

  • Angle guide with four sharpening angles to choose from.
  • V-Lock Vise holds knife at consistent angle during sharpening.
  • Coarse diamond, Fine Diamond, Serrated edge stone bar.
  • Micro-tool Sharpening Pad on diamond stones.
  • Sharpening groove for hooks and pointed tools.
  • Premium honing solution cleans and protects.
Check Stock

Benchmark Abrasives 4.5\ Super Thin Turbo Diamond Blade Angle Grinder Blades for Cutting Wood, Alloy Steel, Glass, Ceramic, Plastic, Iron, Marble, Stone, Metals, Tiles, PVC

  • HIGH-QUALITY, SUPERABRASIVE DIAMONDS - Made with the latest diamond vacuum-brazing process for the strongest bond possible to the steel core. Excellent for cutting through pre-stressed concrete, ferrous and non-ferrous metals, pipe, metal plate, steel bar, angle iron, ductile iron, rebar, steel rod, iron bars, ductile pipe, cast iron, copper, brass, stainless steel, aluminum, scrap metal, HDPE and PVC plastic pipe..
  • LASTS 100X+ LONGER - Compared to traditional abrasive cut off wheels and will cut with a constant, even cutting depth that doesnt wear down as you cut. Abrasive discs wear down and will shrink which can be dangerous. This diamond blade maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. Save time by using one blade without having to constantly put on a new disc..
  • SIDE COATING - Prevents stress build up and allows the side of the blade to be used for grinding. Trusted by firefighters and swat teams worldwide, this diamond blade is used as an emergency rescue and tactical entry tool..
  • SPECIFICATIONS - 12" diameter X .125 thick with a 1" Arbor with 20MM Bushing. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY - This product has a 100% lifetime warranty with free return....
Check Stock