Reviews Current Shunt Monitor

Hunter Wand Wi-Fi Module for X2 Outdoor Irrigation Controller

  • PRO-HC Indoor Wi-Fi enabled for simple and fast connection to the internet. External Plug-In Transformer.
  • Full-functioning controller with touchscreen, also fully accessible via Android or iPhone app..
  • Large terminal strips and wiring compartment. Dedicated master valve/pump start.
  • Pro-HC controllers continuously monitor the electrical current flowing to your solenoid valves. If the current is too high or too low, Hydrawise will....
  • Daily schedule adjustments, based on local weather data, monitor past, current and forecasted temperature, rainfall, humidity, and wind speed..
Check Stock

Mount-It! VESA Mount Adapter Mounting Kit for Non-VESA HP ACER Samsung DELL Asus Monitors 13 to 27 Inch LCD LED Screens, VESA 75 and 100 Compatible

  • NON VESA MONITOR ADAPTER – These adapter arms allow mounting non-VESA monitors to VESA monitor mount desk and wall mounts. Designed to fit any VESA monitor mount with 75x75 and 100x100mm mounting holes, and includes all required screws and other hardware for assembly.
  • UNIVERSAL VESA MOUNT KIT – Designed for Dell, Samsung, HP, Acer, Asus, AOC, Viewsonic monitors that do not have a standard bolt hole pattern. Adjustable monitor arm adapters can be placed in many positions to accommodate varying sizes and shapes of monitors.
  • WIDE COMPATIBILITY - Fits screen thickness of 1 inch to 2.75 inches and bezel height from 10.5 inches to 16.25 inches. Arms can be rotated up and down to adapt to different monitor sizes. NOT RECOMMENDED FOR CURVED MONITORS.
  • HEAVY-DUTY - Powder coated steel design is heavy duty and can carry up to 17.6 Lb monitors. Attach this well constructed monitor mount kit to your current VESA mount to securely hold your non-vesa monitor.
  • EASY INSTALLATION - Includes all required screws and other hardware for easy assembly. Attach these non VESA monitor arms to your current VESA monitor mount and improve your workspace and get back to work in no time..
Check Stock

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

  • This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation..
  • This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for....
  • Two Form of Output: current output or voltage output (burden resistor needed to add).
  • Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

UCTRONICS Numerical Control DC 6-55V to 0-50V 5A Step Down Stabilized Power Supply Constant Voltage Current Buck Power Converter Power Supply Adjustable Module

  • UCTRONICS Variable Bench Power Supply DSP5005 - Buck Converter DC 6-55V to 0-50V 5A Precision Digital Adjustable Step Down - Constant Voltage and Current, 10 Preset Settings Switchable: This power supply combines digital control with analog integration. Its output range: Voltage is 0-50.00V, step by 0.01V.
  • This step down voltage regulator can store M0-M9 10 groups preset value when power-down. Keep pressing M1 or M2 more than 2s, the corresponding data group will be extracted and displayed on the right of the screen.
  • The 1.44 in colorful LCD monitor can display the preset voltage, input voltage, output voltage, the preset current, output current, output power at the same time. On the output state remind area, you can monitor that the key is locked or not, output is normal or not, the state of constant voltage and constant current, the current data set prompt and output opens or not.
  • There are four button-"M1", "M2", "SET" and "ON/OFF", and a coding potentiometer. Can be used for to set the output voltage and output current on the main display interface, set the data on the data setting interface, set the protection value, adjust the brightness of screen, extract Shortcut storage data group M1 or M2, etc..
Check Stock

6V AC Charger for VTech Baby Monitor Power Adapter, UL Listed Long Cord fits DM221 DM221-2 DM223 DM251 (Parent & Baby Units), DM111 DM112 DM222 DM271 (Parent Unit ONLY) Safe & Sound Audio Monitor

  • ✔Reference Compatible Models - Safe & Sound Audio Monitor included Baby Monitor Charger DM221 DM221-2 DM223 DM251 (Parent & Baby Units) and DM111 DM112 DM222 DM271 (Parent Unit ONLY).
  • ✔ SAFETY / UL LISTED: Tested, Approved and Certified by UL,Safety of your equipment, business, home and family depends on the quality of your electronics.
  • WARRANTY: 30 Days Refund - 24 Months Exchange.
  • ✔ How to know if it fits your device? - Make sure your VT Baby Monitor input port is a ROUND port. Input Voltage is 6.0V while input current is or lower than 400mA. This won't fit for devices that input voltage ISN'T 6V or input current higher than 400mA..
  • ✔ Extended Long Cord Design - Up to 6.6Ft. in Length. Enables to set your monitor and camera easily. No more limits with the short cord..
  • ✔Wide Range Compatible Power Supply - Input AC100 - 240V.
  • Output DC 6.0V - 400mA. *Notice*: Output current 400mA Adapter can use for devices that need lower than 400mA without damaging.(like 200mA 300mA 400mA). However, 6V 200mA adapter CANNOT use for devices that need higher than 400mA (like 500mA), which may do harm to your device..
Check Stock

inDigi Android SmartWatch & Phone - SMS & Call Notifications - Camera w/Pedometer

  • Universally Compatible (iOS & Android) + Pedometer + Sleep Monitor + Remote Shutter.
  • Bluetooth 4.0 Sync Smart Watch - Dial and Receive calls directly from the watch itself with the built-in MIC and speaker.
  • Powered by MTK2052 Processor , Bluetooth Sync, Heart Rate Sensor, Pedometer, Sleep Monitor, Remote Camera Shutter and more..
  • Pedometer & Sleep Monitor record the number of steps taken throughout the, view current walk distance. Sleep Monitor - Wearing it when you sleep will help you monitor your quality of rest..
Check Stock

USB Meter X-DRAGON Digital Multimeter USB 2.0,Multifunctional Electrical Tester Capacity Voltage Current Power Meter Detector Reader with Dual USB Ports,LED Display,7 Modes[Upgraded]

  • ❤️7 Modes Monitor: The USB monitor can display voltage, current, capacitance and power, press the button to switch among seven different display....
  • ❤️Measuring Range: Voltage 3.2-15V Current 0-3A Accuracy: +/- 1%.
  • ❤️Dual ouput: Output one is used for both charging and data transfer, Output two is for large current fast charging.
  • ❤️Display: Simultaneously displaying of Amp and Volt in real-time.
  • ❤️Widely used: Perfect for testing how fast a USB cable or USB power charger, such as power bank, solar charger.
Check Stock

DR.LILIANG 4-Pin RGB LED Light Strip Connectors Kit, LED Strip Connector Adapter for 5050 10mm, Gapless Led Light Connectors for SMD Multicolor LED Strip, Solderless 4Pin LED Light Strip Accessories

  • ...connection without the hassles of soldering. We also include an extra paper and online user manual with pictures and texts for your reference!.
  • Durable & Tightly --- With a durable premium PVC plastic cover, these led strip connectors can connect and protect your light strip tightly for a long time. It supports 0-4A current and 0-24V voltage input, operating temperature to -40 ℉ ~ 221 ℉. Besides, the wire is soft, bendable which means you can bend the wires to any place you want and ensures the current more stable..
Check Stock