Reviews Coolant Supply Adapter

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Stant 12036 Cooling System Pressure Tester Threaded 'System' Adapter

  • Stant’s Engine Cooling System Pressure Tester adapters make it quick and easy to hook up a Stant Cooling System Pressure Tester to just about any automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle’s coolant filler neck to the Coolant Pressure Tester.
  • The 12036 Tester System adapter allows the testing equipment to attach to the vehicle’s filler neck.
  • Fits many late model Audi, Porsche, and Volkswagen cars.
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ....As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund,no question asked.
Check Stock

Stant 12043 Cooling System Pressure Tester Threaded 'Cap' Adapter, 1 Pack

  • Stant engine cooling system pressure tester adapters make it quick and easy to hook up a Stant cooling system pressure tester to just about any Automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle's coolant filler neck to the coolant pressure tester.
  • 12043 is a threaded adapter that allows the cooling system pressure tester to work on 2013 Ford escape and Fusion models as well as select Mazda vehicles.
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ...ser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisel....
Check Stock

Master Cooling System Test and Purge Auto Kit by Steelman, 27-Piece Kit, Leak and Pressure Test, Vacuum Purge Kit, Storage Case Included

  • 27-PIECE KIT – Kit contains 27 pieces including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding / coolant hoses.
  • LEAK AND PRESSURE TESTS – Perform leak and pressure tests on cooling systems, radiators and heater cores, head gaskets, headers, and water pumps.
  • TEST RANGE – Test for cooling system leaks at up to 35 PSI.
  • VACUUM REFILL – Includes vacuum purge kit to refill coolant systems and prevent air lock / contamination.
  • COLOR CODED CAPS – Test adapter caps are color coded for easy identification.
  • FOREIGN AND DOMESTIC – Fits a wide range of foreign and domestic models including Ford, GM, Honda, Mazda, Audi, Nissan, Toyota, Chevy, and more.
  • STORAGE CASE – Kit comes with a convenient blow-molded red plastic case for easy organization and storage.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin mater....
Check Stock

6AN to 12mm Banjo Fitting Hose End Adapter - M12 | K-MOTOR

  • 6AN to 12mm Banjo fitting - Hose end adapter ( M12-AN6).
  • Compatible with 3/8 regular or 6AN braided hose.
  • Suitable for all fluids - Fuel, oil, coolant, water, air, etc...
  • Adapter for fuel rail, fuel filter, fuel pump, oil coolers, etc....
  • What's in the box: (1) Banjo adapter (2) Washers.
Check Stock

GlowShift 44mm 1-3/4 Radiator Hose Attachment Adapter for Water Coolant Temperature Gauge Sensor - Includes Hose Clamps

  • GlowShift 44mm (1-3/4") Inner Diameter Hose Attachment Designed for Installing a Water Temperature Sensor Directly to the Coolant Line of the Radiator.
  • Features 1/8-27 NPT Thread Port for Temperature Sensor & 2 Hose Clamps to Secure the Adapter to the Coolant Line.
  • Manufactured from High-Quality Aluminum that's Built to Last.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock