Reviews Control Check Valves

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..

Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.

Vacuum and fuel pressure tester is easy-to-read and has a 2-1/2 white face.
Checks the mechanical condition of the engine and vacuum control system function.
Diagnoses leaks in the intake manifold, manifold and head gaskets, piston rings, valves and vacuum lines.

【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..

Application: For General Airsoft Maintenance and lubrication for Gears, Seals, O-Rings, Plastic Parts, and more.
For ALL Airsoft guns and real-steel hand guns.
Prevent Jamming and reduce wear and tear and enables smooth operation.
Enhance your gun's performance, longevity, accuracy, and bb feeding.
Inflate air seal o-rings on valves with dried o-ring. Check for defective o-ring....
For AEG & GBB: Spray into magazine bb chamber periodically to prevent dust build-up == For Valves: Spray into gas-in and gas-out valves to check for....

All In One Package: No Worry About Mismatching - Complete air pump accessories of airline tubing, air stones, connectors, suction cups and check valves for basic aquarium aeration setup..
13 Ft. Airline Tubing: Standard 3/16" ID airline tubing. Made of reliable frosty clear plastic, the hose is flexible, durable and kink-resistant. Desired length for most fish tanks..
2 Air Stone Cylinders: 0.8" D x 1.2" H. Small size to be easily driven by even nano air pumps. Produce lots of medium bubbles to aerate your tanks and enliven the aquatic lives..
4 Connectors: Include 2 straight and 2 T-shape connectors to connect standard 3/16" ID tubing. Allow you to connect one or more air inlets to create one or more outlets..
6 Suckers & 2 Check Valves: Soft clear plastic holders fit 3/16" ID hoses and can stick tightly to the smooth tank. The check valves can effectively prevent back siphoning of water..

90 Degree Backstop with (HO) Hold Open - ADA 8.5lb opening force - Exterior Door.
Suitable for Exterior Doors from (36" to 48" x 96") - Two Speed Control Valves.
Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
ADA (Handicap) 8.5lb opening force. For use on center pivoted installations - UL Listed.
Stable hydraulic door check fluid for any climatic operation and constant lubrication.

105 Degree Backstop (NHO) No Hold Open - ADA (Handicap) 5lb. opening force - Interior Door.
Suitable for Interior Doors from (36" to 48" x 96") - Two Speed Control Valves.
Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
ADA (Handicap) 5lb. opening force. For use on center pivoted installations - UL Listed.
Stable hydraulic door check fluid for any climatic operation and constant lubrication.

Three independent regulating valves - control sweep and latch closing speeds, also back check cushion..
Supplied with both wood and machine screws.