Reviews Compact Swaging Tool And Flaring Tool

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

Capri Tools 3/16 in Double Flaring Tool CP21110-316

  • Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on....
  • Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
  • Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
  • Detachable die lets you also use with a bench vise.
  • All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool.
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

YELLOW JACKET 60430 Lightweight Swaging/Flaring Tool 6 Positions

  • Six quick-change positions for flaring soft chopper and aluminum tube.
  • The chrome finish of the swaging pins allows for an easy swaging operation.
  • Strong aluminum bars – each hole flare tested more than 1000 times.
  • Swage pin sizes are molded into the case for easy organization and differentiation.
  • Quick connect feature on lightweight yoke saves time during pin/cone changing.
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

ARES 18010 - Universal Hydraulic Flaring Tool Set - Create 45 Degree Single or Double Flares, ISO and DIN Bubble Flares, Push Connect Flares and GM Fuel Line Flares

  • INCLUDES: This Universal Hydraulic Flaring Tool Set includes one hydraulic flaring tool assembly, and all of the dies and adapters you need to create 45° Single or Double Flares, ISO/DIN Bubble Flares, Push-Connect and GM Fuel Line Flares in the following tubing sizes: 45-degree single or double flares in 3/16, 1/4, 5/16, 3/8, & 1/2-inch.
  • ISO/DIN bubble flares in 4.75, 6, 8 & 10mm.
  • Push-Connect type flares in 1/4, 5/16, 3/8, & 1/2-inch.
  • and GM style fuel line flares in 5/16 and 3/8-inch tubing..
  • DESIGN CONSIDERATIONS: This tool is designed to be used on- or off-car with a hydraulic cylinder, so you can create flares as efficiently as possible when and where you need them..
  • APPLICATIONS: This Universal Hydraulic Flaring Tool can be used to create 45-degree Single or Double Flares, ISO/DIN Bubble Flares, Push Connect-Style Flares and GM Fuel Line Flares in a wide variety of materials including steel and soft metal tubing. Whether you’re working on brake lines, transmission cooler lines, or fuel lines, this tool will help you create the flares you need quickly and easily..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES Universal Hydraulic Fla....
Check Stock

Hydraulic Tube Expander Compact Swaging Tool Kit with Tube Cutter Deburring Tool and 7 Expander Heads for 3/8 to 1-1/8 Inches Copper Pipes

  • WHY NEED IT -- Our HVAC Hydraulic Tube Expander Compact Swaging Tool Kit is ideal for HVAC/R instillation and maintenance. A must have tool for a hvac....
  • APPLICATIONS -- Comes with 7 expender heads of 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', 1'' and 1-1/8''(O.D.), Compatible with a wide range of pipe....
  • UPGRADED DESIGN -- Use the knob to make the expander tool "reset/work", durable and reliable. The whole tool kit is composed of black, silver and....
  • EASY TO USE -- Handy to choose the expander head with the marked size, the tube expander with the thick and comfortable handle is easy to operate,....
  • WHAT YOU GET -- Package includes Hydraulic Tube Expander, Deburring Tool, Tube Cutter and 7 Expander Heads, User Manual. All in a decent suitcase. We....
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock