Wooster Brush RR723-9 Pro/Doo-Z Roller Cover 3/8-Inch Nap, 9-Inch
- Extra value 3 pack of shed-resistant for all paints enamels primers urethanes and epoxies.
- Proprietary high-density white fabric with a golden pinstripe stays resilient and resists matting for the smoothest professional finish.
- Contractor packed in an eye-catching poly bag with header.
Check StockBACOENG 5 Gallon Vacuum Chamber Kit with Vacuum Pump Standard HVAC
- 5 Gallon Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc..
- Silicone gasket to be used over 10,000 times without deterioration..
- Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM.
- Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml.
Check StockApoxie Clay 1/4 Lb. White Epoxy Modeling Clay
- Superior modeling, impressions, and detail finishing. Use this product if you are sensitive to solvent based epoxies..
- User friendly air dry modeling clay. Non-flammable, non-hazardous. No solvents or fumes. Complies with ASTM D.4236..
- Plasticity and handling features make this modeling clay very user friendly..
- Strongly adheres to almost any clean surface . . . including ceramic, fiberglass, foam, glass, metal, plastics, resin, stone, wood, and more..
- Working time is about 2-3 hours. Cures to a hard, waterproof finish in 24 hours..
Check StockABLAZE 1.5 Gallon Gal Tempered Glass Lid Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies Kit
- Glass Lid Design Ensures More View and More Complex Material Can Be Put Into the Chamber.
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood.
Check StockBSI / Taytools Bob Smith Industries 30 Minute Slow-Cure TM 2 Part Epoxy 4.5 OZ Combineds
- SLOW-CURE (TM) 30 min. epoxy works best for forming reinforcing fillets on joints..
- It has the highest strength of BSI epoxies..
- It is waterproof and more heat resistant..
- Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours..
Check StockPolytek Pol-Ease 2500 Release Agent (12oz. Can)
- Can be washed off models and castings if they need to be painted.
- For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
- Apply to silicone rubber molds when casting liquid silicone rubber.
- To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
- Apply to polyurethane molds before casting polyurethane liquid plastics.
Check StockPolytek Pol-Ease 2500 Release Agent (Case of 12 cans)
- Can be washed off models and castings if they need to be painted.
- For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
- Apply to silicone rubber molds when casting liquid silicone rubber.
- To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
- Apply to polyurethane molds before casting polyurethane liquid plastics.
Check StockWooster Brush RR727-9 Pro/Doo-Z Nap Rollers, 3/8-Inch, 6-Pack , White
- White Woven Shed Resistant Fabric Blend With Double Golden Pinstripe.
- Super Dense High Capacity Fabric Hold More Paint.
- For Flat, Eggshell, Satin, Semi-Gloss, Gloss, Enamels, Primers, Urethanes & Epoxies..
- Contractor quality fabric for smooth clean finish.
- Proprietary high density fabric stays resilient during heavy use.
Check StockABLAZE 2 Quart Stainless Steel Vacuum Degassing Chamber and 3 CFM Single Stage Pump Kit
- 2 Quart Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc..
- Silicone gasket to be used over 10,000 times without deterioration..
- Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM.
- Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml.
Check Stock 
