Reviews Coaxial Output

Antronix CMC2002H-A 2-Way Horizontal Splitter -3.5dB 5-1002 MHz High Performance for Coax Cable TV & Internet

  • 【MULTI PURPOSE 2-WAY COAX CABLE SPLITTER】NEWCARE Nickel-Plated digital coaxial xfinity cable splitter is used for splits a single digital signal to up to 2 devices. It works with cable TV, satellite, high speed internet or camera, and cable TV, amplifying antenna, amplifier, and other coaxial devices. Compatible with RG59 and RG6 coax cable..
  • 【CAREFUL PREMIUM CONSTRUCTION】This coaxial cablesplitter box is made of nickel-plated zinc press box, with better weather resistance, rust resistance, stability. The sealed housing increases waterproof protection, and the electronic component inside the device receives the internal pressure of 15 psi. Suitable for indoor, outdoor, wet / dry environments..
  • 【LOW SIGNAL LOSS】The frequency range of this coax splitter supports up to 5-2400MHz (2.4GHz), and internal circuit board for better reliability/durability. High shielding structure with low insertion loss, high return loss and isolation for better performance on TV, satellite and all other devices’ signal. Between 1750 and 2400MHz there is low signal loss of only 4.5db on each output port improving performance and speeds..
  • 【INSTALLATION STEPS】①Prepare the coaxial cable and F-type male connector②Strip the coaxial cable③Connect the coaxial ca....
Check Stock

Digital to Analog Audio Converter with Headphone Amplifier & Bass Control by J-Tech Digital | 192kHz 24bit Optical Coaxial RCA 3.5mm

  • Ultra low jitter and high fidelity design using new receiver & D/A converter chip. Converts coaxial or toslink digital PCM/ LPCM audio signals to analog L/ R RCA and 3.5mm Jack audio simultaneously. Note：When connected to the Toslink and Coaxial cables at the same time, converter will give priority to Toslink input..
  • Input Audio Connector: 1xToslink,1xRCA (Coaxial).
  • Output Audio Connector: 2 x RCA(R/L), 1×3.5mm Jack.
  • Powered by 5V/1A Power Adapter.(NOTE: Do Not Use Other Plugs, It Can Only Use 5V/1A Plug).
  • Supports sample rates including 32KHz, 44.1KHz, 48KHz and 96KHz.
  • 24-bit SPDIF Incoming Bit Stream on Left and Right Channels.(NOTE: Do not support 192kHz sample rate audio).
  • Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.(NOTE: 5.1 channel is incompatible, please set your DVD or player audio output to PCM or LPCM, Convert and transfer audio signal only, do not support audio decode）.
  • Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc..
Check Stock

GROWORD Satellite Splitter 5-2500MHz, 2-Way CATV Splitter with RG6 Coaxial Cable and 2 Connectors, for Pass Power to LNB, Improve HD TV Satellite Antenna Signal Quality, Corrosion Resistant

  • ✅【Suitable for Satellite TV Signal】 5-2500MHz digital coaxial cable splitter can be adapted to your satellite antenna, satellite receiver, satellite tuner(LNB), set-top box.
  • and can split coaxial cable, RG6 and F660 cable, satellite and TV signal. It can be used both for new house decoration and indoor and outdoor replacement. It can be used in your cable TV coaxial cable as well..
  • ✅【Easy Construction Cable Clean】 When there is only one antenna at home, but there are 2 or more TVs, no need to connect an extra antenna, just a 2-Way coax splitter! Our cable splitter comes with 1 splitter + 2 cables of 13.78'' (35cm) length + 2 female output connectors. Convenient construction, home cables are not cluttered, making home wiring more beautiful and aesthetic..
  • ✅【Improve Signal Quality】 Worried about signal loss? High-performance satellite tv splitters with only 4dB output loss per port, which can effectively improve signal quality, reduce TV noise and equipment signal loss. It is ideal for improving TV signals..
  • ✅【PASS Power to LNB】 The power supply supplies power to the satellite tuner(LNB) through all ports, no need to buy additional cables, this can make your satellite connection easier..
  • ✅【Unique Design for Durability】 The cab....
Check Stock

HDMI ARC Adapter to RCA Audio Converter Digital to Analog Stereo DAC Coaxial Optical ARC Input to Coaxial +Optical +L/R+3.5mm Jack Output for TV

  • 【Digital Audio Converter for TV】Multiple audio formats are converted to each other, supporting optical, coaxial, HDMI ARC input, optical and coaxial as well as 3.5mm AUX stereo and L/R RCA interface audio signal output at the same time. Only one audio format input can be selected at the same time, which is set by DIP switches..
  • 【HDMI ARC Adapter】HDMI ARC audio adapter can extract HDTV or projection audio that supports ARC and convert it to the audio format you need for output.( Note: If you need to use the HDMI ARC channel to transmit audio, the HDMI device (TV or projection, etc.) must support the ARC function, and the HDMI cable used needs to be an HDMI 2.0 version cable. At the same time, the converter does not support the use of the TV remote control to control the volume of the speakers.).
  • 【Pure Audio Signal】During the format conversion process of the audio signal, it will’t cause loss and interference, which will affect the quality of the audio signal.DTS/ Dolby-AC3/ DSD/ LPCM Supports sample rates including 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz. (Note: If you are using stereo R/ L or 3.5mm jack output, this unit can only support PCM audio form....
Check Stock

Analog RCA L/R Audio to Digital Optical S/PDIF Audio Converter

  • Provides simultaneous digital optical output and coaxial S/PDIF output for maximum installation flexibility. Supports uncompressed 2-channel PCM digital audio output. Supports digital audio output sampling rate at 48KHz..
  • High-performance stereo audio analog-to-digital (A/D) S/PDIF converter designed for professional and home audio applications. Adopts the advanced audio encoding hardware chip to transcode the audio information digitally with precision. Converts any analog stereo audio signal into both digital coaxial and digital optical audio formats..
  • Supports sampling rate at 32,44.1,48 and 96kHz. 24-bit S/PDIF bit stream on left and right channels. Legacy audio sources such as a tape deck or VCR can be converted to 2.0 PCM for integration with an amplifier's digital input..
  • This digital audio converter can be used as audio signal repeater.  Audio cables connected to the outputs of this converter can run up to 16 feet with the original sonic quality retained all the way with no degradation for maximum fidelity..
  • Provides electromagnetic-noise-free transmission. Compact size with low power consumption..
Check Stock

SMSL DO100 USB DAC ES9038Q2Mx2 OPA1612x4 Bluetooth5.0 DSD512 32bit/768kHz USB/BT/Opt/Coax Input RCA/XLR Output High Resolution Balanced Audio Decoder with Remote Control

  • 【ES9038Q2Mx2 & OPA1612x4】SMSL DO100 dac use 4x High-end dual op amp OPA1612 and a large number of audio grade components and 2x ESS Technology high-end D/A chip ES9038Q2M. The 2nd generation XMOS solution supports Dop256 and native DSD512, and PCM supports up to 32bit/768kHz..
  • 【Bluetooth 5.0 & DSD Transmission】 DO100 use Qualcomm latest Bluetooth chip QCC5125K and supports LDAC 24bit/96khz,APTX/HD,SBC,AAC. All input ports(except Bluetooth)support DSD transmission,coaxial and optical supports DOP64..
  • 【High Quality Audio Decoder】Use advanced glass display panel, CNC processing shell, mini size design.Supports full-function remote control..
  • 【Balanced output】DO100 supports four input modes: USB input, optical fiber input, coaxial input and two output modes: single ended line output and balanced line output to meet different needs..
  • 【Low-noise Switching Power supply】Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits..
  • 【CNC INTEGRATED MILLING PROCESS】CNC processing shell, integrated milling technology, fine workmanship and delicate touch..
  • Input：USB / Optical / Coaxial / Bluetooth..
Check Stock

Optical-to-Coaxial OR Coaxial-to-Optical Digital Audio Converter ROOFULL Bi-Directional Digital Coaxial to/from Optical Toslink SPDIF Audio Converter/Adapter/Repeater

  • 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input.
  • 【Audio Format】 Support multi-channel surround sound, uncompressed LPCM/PCM audio and compressed 5.1 audio including Dolby Digital (AC3), DTS to audio processor or A/V receiver with capacity of decoding audio source. The highest support 192 KHZ sampling rate. Noise-free transmission.
  • 【Easy to Setup】 Plug and play, no need any software and driver. Come with 5V1A power adapter (support 100V-240V input), no need to prepare by yourself.
  • 【Long Distance】Use Optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters (98 feet).
  • Use the standard Digital Coaxial cable output can be up to 10 meter (32 feet).
  • 【Wide Compatibility】Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port. (If you also need optical and digital coaxial cable, please search "B07D7TDXF6" on Amazon).
Check Stock

Insignia Optical/Coaxial Digital-to-Analog Converter – Black

  • PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed).
  • Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial).
  • Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
  • Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
  • Do Not Use Other Plugs, It Can Only Use 5V 1A Plug.
  • Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz.
  • 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels.
  • Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output.
  • Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
  • Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.
Check Stock

Digital to Analog Audio Converter with Remote, 192KHz DAC Converter with Volume Control&Bass Adjustment, DAC Box with Optical/Coaxial/Spdif Input and RCA 3.5mm Output Compatible with TV/PS4/DVD

  • 【Digital to Analog Audio Converter】The DAC audio converter converts digital audio SPDIF or Coaxial to analog stereo RCA LR and 3.5mm audio signal output. (Does not support analog to digital audio converter ).
  • 【The bass adjustment button of the remote control】The upgraded version of the DAC converter has a bass adjustment function, which can provide amazing stereo effects, heavy bass effects, and create a perfect environment different from the sound field (in order to receive better signals, when using the remote control Please make sure to point the infrared IR of the converter).
  • 【Supports Sampling Rate】Support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz sampling rate, it supports uncompressed 2 channel PCM audio signal output. (Please set the audio output format to PCM ) Set the format steps: Setting--Sound--Audio Format-PCM/LPCM.
  • 【Wide Compatibility】This DAC converter works perfectly with most home audio device, including Xbox, PS3, PS4 Blu-ray players, HD DVD HDTV etc..
  • 【Easy to use】Connect the optical or coaxial cable to the signal source and converter, and then connect the RCA or 3.5mm audio cable to the output device and converter. You can easily select coaxial or optical input through the remote control or buttons. （Note: The rem....
Check Stock