Reviews Clamping Plate

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

Main specifications:003cbr003e 1" - 20mm ,003cbr003e 1" - 5/8" ,003cbr003e 7/8" - 5/8" ,003cbr003e 20mm - 5/8" 003cbr003e..
Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..

Height adjustable from 26.5 inch to 47 inch (673mm - 1193mm).
Side clamping top plate can adjust width from 5.5 to 11 inches (140mm-279mm). For width adjustment, #3 Phillips bit is recommended..
The top plate can pan 180 degrees and tilt +/-10 degrees for level adjustment.
Adjustable screw-in rubber feet keep unit level on carpet or hard floor.
Concealed wire management, Stability ensured.

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm.
【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately..
【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant.
it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used..
【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography..
【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench. Please look carefully that the size suits yours..

【Adjustable Screw Tension】Screw-adjustable locking mechanism ensures maximum locking force, ideal for adjusting pressure to different job. 2 parallel plate-style flat tips for firmly gripping sheet metal without bending it..
【Trigger Release Design】Classic trigger release quickly and effortlessly unlocks the tool. Punched steel plate handle with trigger release design ensures more clamping power and durability under high tension..
【High Quality Material】It is constructed of High carbon Steel which ensures high durability and long lifespan. Heat treated steel with nickle surface finish is good for increased strength and corrosion resistance..
【Wide Function】10-inch sheet metal tool is ideal for bending, shaping, and crimping sheet metal, making bending, forming, and crimping sheet metal easier..
【Product Dimension】10inch , 25×10×6.8(10*4*2.7inch).

Outer spindle acts on the clamping jaws – inner spindle applies pressure to the front edge.
Two large non-slip, opposing, gentle jaws for positive grip.
Large swivel pressure plate with protective plastic cap.
Lightweight, corrosion-resistant aluminum housing designed for high static stress load.

Includes two (2) BES8511 Face Frame Cabinetry Clamps.
Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!.
Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled..
Clamp specifications: works on stiles up to 1-1/4 in. thick.
Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet..

... SAFETY:Three separate air chambers, two on the hull and one on the bottom,if one of them is damaged,the other air chamber will not be affected,even if only one chamber is intact,it can still reach the shore safely..
MATERIAL：0.7mm thickened PVC clamping net material hull, strong and durable, not easy to deformation，The bottom plate added nylon wire，After inflating it, its hardness is close to that of the board，It is more stable when standing inside the boat, and the bottom plate also serves as a separate air chamber to provide additional buoyancy，If the inflatable boat breaks and leaks air,It can still stay afloat，One more layer of security for life..
In order to facilitate packaging folding, the air plug is in deflated state when leaving the factory, as the boat before inflatable must press the center of the high pressure valve spring rod turn right 90 ° or to the left, to confirm the spring rod has pop-up, if you forget this step filling operation in gas will leak out soon..
Accessories include: inflatable boat, Inflatable floor, paddle *2, seat plate *2, foot pump, repair kit..