BougeRV 9BB 100 Watts Mono Solar Panel,21.9% High Efficiency Half-Cut Cells Monocrystalline Technology Work with 12 Volts Charger for RV Camping Home Boat Marine Off-Grid.
- 1-on-1 Solar Solution by BougeRV Tech Support & Warm Warranty.BougeRV promises a 25-years warranty and lifetime warm-hearted service for you. Please....
- High-level 9BB Cell Design has a 21.9% Highest Conversion Rate. Makes the solar panel have a longer service life. Increase the cell receiving surface,....
- Half-cut Cells Technology. BougeRV 100W solar panel use half-cut cells technology increases performance efficiency. Compared with the Standard module,....
- Suitable for multiple scenarios. Compatible with on-grid and off-grid inverters, the BougeRV 100W solar panel is suitable for powering the house or....
- Durable & User Friendly. The sturdy panel can withstand high wind (2400 Pa) and snow loads (5400 Pa) and have excellent performance in low-light....
Check StockDIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino
- Using Potentiometer 105, output timing is from 0.5S to 200S.
- Widely used in:Security Products,human body sensors toys,human body sensor lighting industrial automation and control, etc.
- NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself.
- Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell).
- Package Included: 5 X HC-SR501 PIR Infared Sensor.
Check Stock
Newpowa Flexible Solar Panel 100W 12 Volt Monocrystalline Semi-Flexible Bendable Mono Ultra Lightweight High Efficiency Charger Off-Grid for Uneven Surfaces Marine RV Cabin Va
- 【Upgraded Design】New 100W 12V Monocrystalline Flexible Solar Panel is made with versatility in mind and is geared towards intricate surface installation & mounting. Upgraded MWT back contact panels with no busbars, solar cell area increased by 3%..
- 【Ultra Lightweight】Only 3.09lbs, 0.07inch thin, less than conventional solar panels, making transportation and installation a breeze. Due to its lightweight and portability, this module is ideal for marine boats, teardrop trailers, curved roofs, and overlanding tents..
- 【Excellent Quality】With IP68 waterproofing, high-efficiency monocrystalline solar cells also advanced high-temperature soldering which features low encapsulation loss, lower operating temperature, and higher output, hyper-cell string ribbons..
- 【Easy-Installation】Four metal pre-drilled holes and connectors help you install easily and quickly. After stringent environmental tests, it was shown to withstand high winds(1600Pa), hail, and snow load (2400Pa)..
- 【Warranty】5-Year Limited Material and Parts Workmanship Warranty. 12-Year 80% Output Warranty..
Check StockHaitengwen Tactical Flashlight Keymod Light with Integrated Rail Mount
- Rail Mounted Tactical Flashlight Keymod - Integrated flashlight and mount, middle tube & rail clamp as one module seamless (no glue).
- prevent crack and fast install to keymod rails.
- Versatitle assemble ways - middle rail mount tube has exact same threads on 2 sides, support reverse installation.
- slight offset keymod mount flashlight more flexibility to mounted on key mod rail systems.
- Compatible for key-mod rails - flashlight with mount unremovable, directly mounted to keymod rails, enhanced key-mod rails screws of heavy duty steel.
- Bright 500 Lumen Tactical flashlight one mode - black flashlight adopts high efficient LED, on/off single mode, airgrade aluminum 6061-T6 body of matte black finish, light up 137-182 yards and constant 4.5 hrs runtime.
- Tactical flashlight pressure switch kit -flash light/rechargeable li-ion battery cell/usb charger/ optional 2 mode pressure switch all included.
Check StockTMISHION Breathalyzer Mini Portable LED Keychain Alcohol for Personal and Professional Use
- 【ENERGY SAVING】: works with two AAA batteries (not included but generally available) Each time you install a battery, you can perform tests more....
- 【SENSITIVE AND HIGH-PRECISION】: The device is equipped with a high-quality fuel cell sensor module for long life and accurate results. Do not use....
- 【EASY TO READ】: Three different LED lights to show the content of alcohol in the blood, make it much easier for night vision and provide....
- 【COMPACT AND LIGHT】: only weighs 1.3 ounces, is small enough to fit in a bag or pockets and any other small space..
- 【WARRANTY】: Tell us if you are not satisfied with our products, we will give you a full refund and we will do everything possible to improve our....
Check Stock
Double Sided Tape Heavy Duty 3pcs 4in x 8in Mounting Tape Pad Sticker Strong Adhesive Tape Waterproof Foam Tape for Indoor and Out Door
- ...ent shockproof and transformation resistance. Non-toxic and environmental. High temperature resistance and waterproof.and durable. Strong adhesive and easy to removal. Powerful ability to bond a variety of surfaces..
- RECOMMENDED: Foam to powder coated painted surfaces. Logo bonding. Touchpad bracket assembly. Camera module assembly. Electronic component bonding. Module bonding to PET card. Touch panel bonding. Rubber feet bonding. Low surface energy bonding. Car decoration bonding. Kitchen and bathroom accessories bonding. Cell phone holder adhesive..
- Advantage: This double sided tape is fast and easy-to-use permanent bonding method provides high strength and long-term durability. Virtually invisible fastening keeps surfaces smooth. Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives. Eliminate drilling, grinding, refinishing, screwing, welding and clean-up..
- How to use: Please kindly note the following steps is 100% necessary to obtain strong adhesion. 1 Cleaning the surface( with adhesion promoter if possible). 2 Wipe dry the surface. 3. Adhering pressing the tape. 4. Waiting for around 24 hours to obtain best bonding strength( the bond strength will achieve 90% after 24 hours)..
Check StockLights88 532nm Green Laser Module Diode Laser Beam Driver(5mw Green Dot Laser Module)
- 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
- Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
- High Reliability Material: This dot diode module is made of durable copper shell for long life..
- Continuous output: This dot diode module supports continuous output and can be used for a long time..
- Application: This dot diode module is designed for engraving machine, cutter and so on..
Check StockDC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube
- 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
- Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
- High Reliability Material: This dot diode module is made of durable copper shell for long life..
- Continuous output: This dot diode module supports continuous output and can be used for a long time..
- Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock
Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V
- POWERFUL 10W DUAL LASER MODULE – The LASER TREE laser module has 80W machine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
- AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
- ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving ....
Check Stock 
