Reviews Converter Module

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.

Converts analog RCA composite input to HDMI 720P/1080p (60Hz) output. The analog to digital conversion in this module employs 10 bits maximal 162MSPS sampling, which automatically detects and converts the composite signal to 1080p (60Hz) output, bringing your media to life with sharp and realistic HD picture quality..
Tiny size and easy to install,plug and play.Provide advanced signal processing with great precision,colors, resolutions, and details..
2RCA to HDMI Converter Compatible with Sega， WII, N64,NGC,SNES, PS1, PS2, PS3, Xbox, STB, VHS, VCR DVD Players, TV and Projector, etc..
Please contact the seller's customer service , if you have any questions. Advanced video processing and scaler video processing technologies enhance the picture’s brightness, contrast ratio, and colors. Durable aluminum build makes for a longer lifespan. NOTE: This is an RCA to HDMI Converter, it CANNOT be used as an HDMI to RCA / AV converter.

【What You Get】Includes 1 piece 12V to 5V USB converter,Input Voltage: DC8-20V,Output Voltage: 5V.Output Current: 3A max.
【Micro USB Connector and High Conversion】Our DC to DC converters have Micro USB charging ports,they can compatible with most electronic devices.DC to DC buck converter are made of high quality industrial-grade chip for durable use,and the conversion rate is as high as 96 percent..
【Premium Quality】12V to 5V DC converter adopts intelligent micro-processing chip, which can automatically protect against overvoltage, overcurrent, overtemperature and short circuit. All epoxy sealed containers have waterproof/shockproof/dustproof housings..
【Wide application】DC converter module 12V to 5V will be suitable for GPS navigation, driving recorder, car radio, car audio, MP3, MP4,electronic dog,walkie talkie, surveillance system, bus display, LCD TV, LED, etc..
【Thanks for Your Patronage】 Thank you very much for your patronage.If you have any questions, please contact us anywhere.We will reply in within 24 hours..

NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
Easy to use, can be fine-tuned by potentiometer.003cbr003e.
Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
【Manufacturer's One-year After-sale Warranty】.

BN-880 is suitable for Open source flight controller, not for flight control with SCM.
Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
When you use it for Raspberry Pi, there is no driver needed but you need to install software.

Basic information: module model: GY-9250.
Power supply: 3-5V (internal low dropout voltage regulator).
Communication: standard IIC communication protocol.
Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
The 16-bit AD converter is embedded in the chip, with 16-bit data output.
Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
Applications: DTV and set-top boxes are applied to internet connection.
Wearable sensors are applied to fitness equipment and sports.

The module is made of high quality ABS material, it is durable and have long service life..
The product has strong compatibility, can be applied in many places, easy to use..
With 2.54mm pin pitch, it can be used for friendly testing of MCU development board..
It can be widely used in LCD/ADC/DAC/operational amplifier RS232, RS485, RS422 bus..
This is a DCDC voltage converter module, not difficult to assemble, convenient to store..

Convert a USB based or PCIe based M.2 wireless module to be used in an IPC mPCIe slot.
Support M.2 E Key and A-E Key WiFi + Bluetooth Wireless Module.
Support M.2 wireless module that is USB base, PCIe base, or Dual USB+PCIe mode.
No driver installation is required. 100% OS-transparent hardware bridge converter to support Windows, MAC and Linux..

BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....