Reviews Ce Press Brake

Silver Stainless Steel Brake Caliper/Master Cylinder/Clutch Slave Cylinder Bleed/Banjo Valve Kit for Brembo on Ducati/Aprilia/Moto Guzzi/KTM

  • Replaces Manufacturer Part Number:1911113 / 1910790 / 1910301.
  • Compatible with: Sportsman 335 1999-2000.
  • The mounting hole is 6.5MM, and the center distance of the mounting hole is 38MM..
  • The live cylinder diameter of the brake pump is 12.7MM, and the oil pipe screw is 10MM..
  • When installing, you must loosen the oil drain screw of the pump under the brake, and continuously press the brake foot brake pump to generate pressure, so that the oil of the brake pump passes through the oil pipe, enters the brake pump, discharges the air, and then tightens the oil drain screw. The brake system does not work without exhausting air.
Check Stock

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

  • 6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
  • Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
  • Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
  • Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
  • Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

FIVE BANANAS Brake Caliper Press Tool Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates Red

  • 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for....
  • 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the....
  • 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press....
  • 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches.
  • Telescopic range: fully retracted: 1.88”, fully expanded:....
  • Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best....
Check Stock

OTC 5081 S-Cam Air Brake Spring Tool

  • OTC's S-Cam Air Brake Spring Tool eliminates makeshift, unsafe methods of unhooking and reconnecting brake shoe retaining springs.
  • For use when replacing brake shoes on heavy-duty tractors and trailers.
  • Simply hook the retaining spring loop and press down.
  • Lever action agains the axle makes the job a snap.
  • Crafted from high-grade materials to ensure quality performance over the lifetime of the tool.
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

Alarm Disc Lock Set, 2 Pack Brake Lock, Anti-Theft Waterproof 110 dB 7mm Pin 5ft Reminder Cable for Motorcycles Bike Scooter Carry Pouch (Black & Red)

  • 【Premium Quality & Waterproof】- The alarm disc lock adopts a high-grade heavy-duty steel body, which makes the alarm brake lock more durable. The 6mm lock pin is super sturdy and practical. The forged steel is waterproof, rust-proof and weather-resistant so that it can work normally in rainy days..
  • 【One-press Operation】- Disc brake lock set is one-key operation, you only need to press the button with a "beep" sound to enter the alarm state. By locking the disc brake to work, it helps to stop the vehicle from moving and keep your belongings safe..
  • 【Wide Application】- This is a security anti-theft disc brake lock, which is suitable for various vehicles with disc brakes up to 6mm: motorcycles, electric cars, bicycles, motorcycles, scooters, etc..
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. （1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

48 Volt 1000 Watt 26 Inch Electric Bicycle Conversion Motor Kit LCD Front Wheel

  • [Powerful Brushless Motor]: Electric bicycle front wheel conversion kit features 36V 750W brushless and gearless hub motor for efficient and noiseless....
  • [Durable & Convenient]: Aluminum alloy frame for durability and stability, can support a heavy weight up to 220 Lbs.
  • [Great Compatibility]: Fit for any 24" bicycle frame with 3 15/16" front dropout spacing.
  • compatible for universal disc brake and V brake, you can....
  • [Easy to Assemble]: Electric bike conversion kit includes necessary components for installation, easy to assemble all the parts together for....
  • [Safe & Environmentally-Friendly]: Hand brakes shut off the motor automatically for saving energy and preventing the motor from overheating.
Check Stock