Reviews Can Ethernet Transceiver

Ethernet to Fiber Converter,OPTONE 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber MMF 850nm550m 0.5Km SC Connector

  • In compact size, zero configuration, support 100-240V power suppply,auto staus LED’s,good way to get a fiber to ethernet extension to your network..
  • Optical port: Gigabit Fiber, Multi-Mode SC SFP SX Transceiver up to 0.5KM 850nm.
  • RJ-45 Port : 1 port 10/100/1000Mbps, for connecting with UTP/STP Cat.5e cable.
  • Supporting: 10 Mbps or 100 Mbps, full or half-duplex mode, or 1000 Mbps full-duplex mode,Supports auto MDI/MDIX function ,9k jumbo frame, complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards,IEEE 802.3x auto-negotiation,independent LFP function.
  • What You Will Have: 1* fiber sfp media converter.
  • 1*user manual, 24-month warranty Lifetime technology support.
Check Stock

CW QRP Shortwave Radio Kit - CW Transceiver Shortwave Radio Kit

  • ...003 multiplication detection, the sound size is adjusted by digital potentiometer and sent to audio active filter circuit. Finally, LM386 drives speaker, and if frequency supports calibration setting..
  • Use 3 bs170 parallel outputs, class E amplification, 12V power supply, output power 5W! Relay switching is used for transceiver, with the function of transmitting delay adjustment to avoid frequent relay switching and improve the isolation of transceiver channel..
  • It has the function of automatically sending call signs, which is very convenient to use. The MCU uses the original code of our store, which can adjust the code speed, sidetone frequency and sidetone size. It can input the call sign by itself (in automatic key mode) and support power down saving..
  • The PCB board of this kit can be conveniently put into the 88 * 30 * 120mm aluminum chassis (the shell needs to be prepared by itself, and the opening size of the front and rear panels is in the mesh disk). Main indicators Power supply: 12V Working current: receiving ≈ 120mA @ 12V.
  • Emission ≈ 1A @ 12V Transmitting power: 5W @ 12V Frequency range: 7.000mhz-7.100mhz, 1kHz / 100Hz step Working mode: CW transceiver, SSB receiver.
Check Stock

Anytone 5888UV III Tri-Band FM Transceiver Tri-Band Mobile Radio with Free Cable

  • 1.▲▲☞FONGHOO☜▲▲ Official Distributor of Anytone. The transceiver is a ruggedly-built,high quality Tri-band transceiver providing 50Watts....
  • 2.Tri-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3.750 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS, DTMF, 5TONE, 2TONE....
  • 4.Ideal for Fire, Police, FEMA, CAP, security patrols, business communications, schools, construction crews, universities, and other organizations....
  • 5.Package contents:1 x Anytone 5888UV III Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws....
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

TYT TH-9000D 1.25M Amateur Radio, 200CH Mobile Transceiver Car Radio 222-225Mhz 45W

  • 1.▲▲☞FONGHOO☜▲▲ Official Distributor of TYT. TH-9000D is mono band mobile car radio transceiver, the less button make it easy to operate..
  • 2.Features: 8 Group's of Scrambler, large LCD screen with adjustable brightness, DTMF/2 tone/5 tone, Full Keypad Microphone, 200 Alphanumeric Channels, 50 CTCSS 1024 DCS and 200CH for more communication options.
  • 3.FCC Part Certified (FCC ID: PODTH-9000DV2), 220MHz (1.25M) Mobile Transceiver, Frequency Range: TX: 222-225MH, RX: 220-260MHz. Output Power: 45W/25W/10W (High/Mid/Low power selectable).
  • 4.Chirp Support & Free Programming Cable for Easier Programming. Software is available free from TYT Website. Original Cable is recommended for easy computer programming..
  • 5.Package Content: 1* TYT TH-9000D Mobile Transceiver (220-260MHz), 1* Handheld Microphone, 1* Power Cable, 1* Screws and Accessories, 1* User's Manual, 1* Fixed Bracket, 1* TYT Programming Cable.
Check Stock

Jeirdus for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L, Gigabit SFP Transceiver Module, 1000Base-LX/LH, SMF, 10km 1310nm Duplex LC Connector

  • Compatible for Cisco GLC-LH-SMD GLC-LH-SM SFP-GE-L.
  • 1000Base-LX/LH, SFP transceiver module for SMF, 1310-nm wavelength, dual LC/PC connector.
  • 1G SFP Transceiver, SFP LX/LH, 1000Base-LX/LH SFP, 10km.
  • Compatible with Cisco.Jeirdus owns Compatibility LAB to meet the coding requirements for various brands of switches and routers.Each transceiver is individually tested before delivery..
  • 100% new materials,high Quality with CE, FCC,3 year replacement and lifetime warranty.
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

FLIPPER Zero, (FLP-Z-W-R04)

  • Sub-GHz Transceiver - Use as a radio remote with many protocols supported.
  • NFC - Store all your Mifare, NTAG, and other NFC cards.
  • RFID - Store, emulate, and write your EM-Marin, HID, Indala keyfobs, office cards, and more.
  • IR Transceiver - Universal IR remote for your TV and more.
  • Bluetooth LE - Extend capabilities with your phone.
Check Stock

Microsoft WIRELESS MOBILE MOUSE 4000 BLUTRACK RED

  • 4-way scrolling and 4 customizable buttons.
Check Stock