Reviews Cam Shaft

OTC 6469 Camshaft Sensor Synchronizer Tool for Select 1997 - 2008 Ford and Mercury Vehicles

OTC Ford/Mercury Camshaft Sensor Synchronizer Tool.
This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing.
Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke.
1997-08 4.2L V6 Econoline, F-Series Truck.
includes instructions for proper use of tool.

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

...ighted pedal plates construction that will easily handle any footwork, these well-balanced twin pedals will interpret exactly what you are playing..
DOUBLE BASS PEDAL IMPRESSIVE RESPONSE: The fully adjustable power cam system offers accelerated beater speed, while the double cam plates maximize longevity. The beater shaft locks to keep the beater in place and special clamps keep the pedal safely connected to the bass drum ensuring that the beat goes on..
1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and stage lighting packages, and everything in between comes with our exclusive, 30-day money back return policy and a premium 1-year warranty! All you have to do is contact us within 30 days to request a return, or within 365 days from purchase to request a warranty replacement..

The mini metal Lathe is a tool for DIY,hobby,modelmaking,crafts,students,small parts processing and others..
This is normal Aluminum+Carbon steel+ABS version. if you need the metal version please contact us for more details..
Saw blade is special designed, only 4mm cam short trip, which will protect human skin from injury..
Main parts of the machine: The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise..

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
Interchangeable blade for fast and easy switch out.
Blast finish bit tips provide a firm hold and reduce cam-out.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
TORX is a registered trademark of Acument Intellectual Properties, LLC.
Assembled in USA of US and imported components.

Keep your Dash Cam powered on while your vehicle is turned off.
Monitor motion detected in front of your vehicle.
Compatible with the following Garmin Dash cams: Dash Cam 45, Dash Cam 46, Dash Cam 47, Dash Cam 55, Dash Cam 56, Dash Cam 57, Dash Cam 65W, Dash Cam....

3200 PSI and 2. 5 GPM of Powerful, Deep-Cleaning Water Pressure Perfect for Decks, Sidewalks, Siding, Fences, Railings, Garage Floors, Exterior Walls, Cars and Patio Furniture – Easy to Fill 0.9 Gallon Gas Tank.
Half Gallon Onboard Soap Tank With 25 Foot Abrasion Resistant Super-Flex Hose With Lightweight Spray Gun and 5 Quick Connect Nozzles (0degree, 15degree, 25degree, 40degree & Soap). Choke Type: Manual.
Heavy Duty Gas Powered 212cc 4-Stroke Westinghouse OHV Horizontal Shaft Engine with Recoil Start - Long Lasting, Maintenance-Free Axial Cam Pump Provides 2. 5 Gallons of Water (and Soap! ) a Minute.
Tough Steel Frame Construction With 12 inch High Profile, Never-Flat Wheels Provide Easy Transportation and Maneuverability – Includes Engine Oil, Tools, and Quick Start Guide to Get Started in Minutes.
All Westinghouse Pressure Washers are Functionally Tested in the Factory and May Contain Minimum Residual Oil and/or Fuel Odor.
Backed by 3-Year Limited Service, Labor, and Parts Coverage with Nationwide Customer Service and Support Network.

Product 1: Pocket-sized dash camera goes virtually unnoticed on your windshield.
automatically records and saves video of incidents with GPS location, date and time.
Product 1: Extra-wide 180-degree lens captures more of the environment, and records 1440p HD video with Garmin Clarity HDR optics for crisp detail day and night.
Product 1: Voice control (only available in English, German, French, Spanish, Italian and Swedish) lets you use spoken commands to save video, start/stop audio recording, take still pictures and more.
Product 1: Saved videos automatically upload via Wi-Fi connection to the secure online Vault to view and share later.
Product 2: Keep your Dash Cam powered on while your vehicle is turned off.
Product 2: Monitor motion detected in front of your vehicle.
Product 2: Compatible with the following Garmin Dash cams: Dash Cam 45, Dash Cam 46, Dash Cam 47, Dash Cam 55, Dash Cam 56, Dash Cam 57, Dash Cam 65W, Dash Cam 66W, Dash Cam 67W, Dash Cam Mini, Dash Cam Mini 2, and Dash Cam Tandem.