Reviews C Clamps Inch

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

Dumble Heavy Duty Jumper Cable and Quick Connect Heavy Duty Jumper Cables 1 Gauge Jumper Cables for Cars Trucks 30ft

  • ...Amps peak engine starting current at 12V DC end and 100 Amps at 110V AC service end (175A-600V for disconnect use only – not for interrupting current).
  • FITS YOUR VEHICLE: 1 gauge thick professional grade copper wire to handle more amps and lose less when jumping.
  • 30-foot (9.1m) long cables for car or even tow truck.
  • 4-inch x 5.75-inch (10.2cm x 14.6cm) overall clamp size with 0.25-inch to 1.7-inch (0.6-4.3cm) jaw opening to access tight spots and clamp to top and side post batteries on your vehicle (works for electronic ignitions and other vehicles as long as polarity is correctly observed and battery terminals are accessible).
  • PERMANENT INSTALLATION: Battery booster cable has 4 color-coded clamps to prevent crossing wires – 2 red positive (+) and 2 black negative (-).
  • Connect 5.75-foot (1.8m) long permanent eyelet ring terminal ends to functioning battery and 24.25-foot (7.4m) long alligator clamp ends to battery that needs to be jumped (both are connected to 5.25” x 2.2” x 1” inch (13.3cm x 5.6cm x 2.5cm) quick connect/disconnect coupler.
  • Comes with attached plug cover protective cap for when not plugged in.
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

VIVO Universal Steel Clamp-on Desk Stabilizer Bar, 36 to 61.6 inch Bracket Support System for Sit to Stand Desk Frames, Black, DESK-STB01B

  • Desk Frame Support - DESK-STB01B is a universal desk stabilizer bar that clamps onto your current desk frame for added support. Effectively reduces side-to-side wobble of most 2-leg standing desks (please note, this will not change forward/back stability). --Patented--.
  • Solid Construction - Sturdy all-steel construction is designed to provide excellent support for your standing desk and everything on it for a safe and secure setup, stabilizing your workstation and reducing wobbling during transitions..
  • Heavy Duty C-clamps - This reinforcement bar mounts to the desk frame’s support columns with two sturdy C-clamps. Simply tighten the rotary knobs to secure the clamps in place, and untighten for fast removal..
  • Compatibility - The support bar is designed to fit most two leg desk frames on the market with a maximum column thickness of 3.2”. The bracket length adjusts from 36” to 61.6” to accommodate your frame setup..
  • Easy Installation - Minimal assembly is required out of the box, and installation is a fast and easy process with the C-clamps attaching to your desk frame without the use of tools..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

WINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps

  • Premium Materials: WINL hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: WINL stainless stee....
Check Stock