Reviews Binding Screw Adapters

EZshoot Boresighter’s Adapters & Screws for 0.177 to 0.54 Caliber Green/ Red Bore Sighter 9Pcs

  • The set contains 9 adapters and screws, complete set with wider range of use..
  • With 9pcs adapters & screw, it perfectly fits for .177-.54 Caliber green/ red bore sight kit..
  • The adapters have moderate hardness, Light weight, strong and sturdy..
  • Buy it to replace your broken adapters instead of re-purchasing a laser bore kit, saving your money..
Check Stock

100 Sets Screw Post Metal Chicago Screws Binding Screw Leather Screw Nail Rivet Button Solid Belt Tack Screw (Silvery, 1/4, 3/8, 1/2, 9/16,11/16 Inches)

  • Assorted chicago screws: 5 sizes, 20 set for each size,100 sets chicago screws in total.
  • Assorted sizes: diameters of these screw posts are all 5 mm (3/ 16 inch), with 5 different lengths, include 6 mm (1/ 4 inch), 10 mm (3/ 8 inch)，12 mm (1/ 2 inch)，15 mm（9/ 16 inch）and 18 mm（11/ 16 inch).
  • Wide range of usage: the screw post is suitable for holding and decorating document, book, scrapbooking, photo album, etc., good supplies especially for leather handicrafts.
  • Chicago Screws Also named as Binding Screw and Screw Post, Easy to Use, Widely Used As The Book or Photo Print Albums Binding Supplies. It Also Can Be Used in the Production of Saddles and Leather Purses..
  • Wide application: especially suit for leather handicrafts decoration, bookbinding, document, book, album, DIY crafts, etc..
Check Stock

8 Pieces Mic Stand Adapter Mic Thread Adapter Set 5/8 Female to 3/8 Male and 3/8 Female to 5/8 Male Screw Adapter Thread for Microphone Stand Mount to Camera Tripod Adapter

  • Robust and beautiful: made from quality aluminum alloy for extended durability, the mic stand thread adapters are anti-rust, light weight and easy to carry, ensure a long service life and reliable daily use.
  • You will get: mic stand adapters, including 4 pieces 5/8 female to 3/8 male and 4 pieces 3/8 female to 5/8 male screw adapter threads.
  • It's beneficial to have a strong connection for your mic, then you don't have to worry about the thread breaking off and your mic falling off.
  • Non-slip design: knurled surface provides nice grip for easy installation and removal.
  • Complete and deep thread without burrs, uniform force and not easy to slip, convenient to install, stable and tight.
  • Nice accessories: if you have some sort of mic stand or boom arm that has a small screw but your microphone has a big screw, this adapter set is available for you.
  • Conversion of microphone holders and accessories from 5/8 inch threads to 3/8 inch or 3/8 inch male to 5/8 inch female.
  • Widely to use: 3/8 inch male to 5/8 inch female mic screw adapter work well with standard mic stands and mic clips/microphones with European 3/8 inch threaded inserts.
  • And also studs for mounting cameras, webcams, filming lights, recorders, action cameras, tripod adapters and other photographic acce....
Check Stock

Camera Mount Screw,ChromLives 1/4 to 3/8 Tripod Screw Adapter,1/4 to 1/4 Screw,3/8-20 Converter Thread Screw Adapter,Camera Hot Shoe Mount Adapter to 1/4 for Camera Monopod,Ballhead Flash Light,22Pack

  • Combo Pack: 22 Pcs Camera Screw Adapter - 5X 1/4" to 3/8" Reducer Bushing Screws.
  • Widely Application: These 1/4 inch camera screw adapters can be mounted on a wide range of different photography. The converter mount screws meet the....
  • Hot Shoe Adapter: Made of anodized aluminum metal, the bottom of hot shoe connects to the dslr/slr camera hot shoe, the top part of it is a standard....
  • Material : These 1/4"-20 tripod screw adapter camera mount are made of aluminium metal. Solid and durable..
  • Precision Made: These camera screw adapters are all with international standard screw type 1/4"-20 and 3/8" male and female thread. Suitable for most....
Check Stock

SoeKoa Mini Projector Tripod Mount Compatible with DR.J Upgrade, DBPOWER, Anker, AAXA Technologies, Artlii, LoongSon, APEMAN and Most Other Mini Projector

  • The Mini Projector Tripod Mount fits the majority of mini projectors with 3 sizes of screw adapters..
  • Screw Adapters Size that 3.9mm/0.154in, 6mm/0.236in, 6.35mm/0.25in..
  • The tilt angle is 90 degrees and the rotation angle is 360 degrees. You can adjust the angle according to your needs..
  • The projector mount pole is easy to be installed with 2 adapters. Just rotate the knob to and tighten it to get the best angle..
  • The Mini Projector Tripod Mount is so convenient storage that you just put it iThe Mini Projector Tripod Mount is so convenient storage that you just put it in your bag or pocket and get going!n your bag or pocket and get going!.
Check Stock

Ten Specimen Density Set (Ten Piece/Cube/Block)

  • ...ing Basic Principles Of Electricity And Simple Circuit Wire Works..
  • ☛ 2, 【 Screw Type Easy for students to use】 ------ This is great for home school making and breaking a single electrical connection circuit experiments. good for teaching basic principles of electricity & how a simple circuit works. screw type binding post, If you use alligator clips you might want to temporarily remove the connector knobs..
  • ☛ 3, 【 Wide Applications】 ------ These are great for demos and project. Easy to use and great learning tool for kids. I think practicing on an education model would definitely benefit any student. these are low voltage, low current miniature bulb holder. for low voltage DC to power. 2.5 Volts, 3 amps, 6 volts max.as it has exposed uninsulated contacts..
  • ☛ 4, 【 Miniature bulb holder Good Choice 】------- The Miniature bulb holder is sturdy and well made. It works well in the hand of students. Miniature bulb holder provides stability in handling and visualization of electrical principles, screw type binding post, screw down..
  • 5, 【 Warm Note】 ------ Of course that while this does teach them how electricity works, you have to make sure to teach them not to play with actual electrical equipment around the house..
Check Stock

Camera Screw Adapter Thread 1/4\ Male to 3/8\ Female and 3/8\ Male to 1/4\ Female Adapter Set for Camera Monitor, Tripod, Mount

  • Applied Function - This Screw Adapter studs for mounting cameras, webcams, LCD monitors, filming lights ,recorders, Gopro cameras, Ballhead, tripod adapters and other photographic accessories on a microphone stand holder..
  • High Quality - Made of metal material, these adapters did the trick in spades and are very secure. Anti-rust, anti-corrosion, sturdy and durable. The metal construction of the adapters should make these last forever..
  • Easy to Use - Mic screw adapter color is Black, knurled finish provides excellent grip, non-slip, deep and without burrs, complete thread, easy to install and stable..
  • Package Includes - 1 piece 1/4"-20 Female to 3/8" -16 Male. 1 piece 3/8" -16 Female to 1/4"-20 Male Microphone stand adapter..
  • 100% Quality Assurance - High quality is our only conviction. WE believe that you receive our products and will make you satisfied..
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

Aexit M5 x Power Fastening Tool Parts & Accessories 80mm Metal Scrapbook Catalogs Binding Chicago Screws Posts Nailer Replacement Parts 20 Pcs

  • Fit Hole Size: M5 x 80mm/0.2" x 3" (D*L).
  • Overall Size: 83 x 9.7mm/3.3" x 0.38" (Total.L*Head.D).
Check Stock