Reviews Amplifier Mixer

Complete Professional 4500 Watts PA System 8-CH Mixer 2pc 15' Speakers Wireless Mics

  • 8 Channel Power Mixer with Build-in amplifier 4500 Watts Peak and Bluetooth/USB/SD/FM Radio Functions.
  • Mixer have bluetooth function also USB/SD card slot plus FM radio function.
  • 2pcs 15" Plastic body 2-Way Passive Speakers (1200 Watts Peak Power, 600 Watts Program, 300 Watts RMS).
  • 2 Channel VHF Receiver with 2pcs handheld Mics.
Check Stock

(2) Rockville SPGN258 Dual 15 3000w 8-Ohm DJ PA Speakers+6000w Powered Mixer

  • Sensitivity : 93dB. Input connections : Two 1/4" jacks and one speakon jack. Two 16 ft speaker cables (1/4 to ). Rubber feet protect the enclosures. Maximum SPL : 111dB. Input connections : Two 1/4" jacks in parallel. Powder-coated steel grill. 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity. 17 Inputs!. 2 Speaker outputs and line output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity.
  • 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors.
  • Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equ....
Check Stock

W WINBRIDGE Wireless Microphone Headset UHF Wireless Headset Mic Transmitters & Receivers 6.35mm for WB711 Voice Amplifier PA Speaker System Amp Mixer Not for Bluetooth Speaker/Phone WB008

  • This wireless microphone can be connected into an active speaker, amplifier, mixer or any device that accepts microphone level inputs (NOT for Aux....
  • This WB008 microphone headset is powered by long-lasting internal lithium batteries located in both the transmitter and receiver. Battery deliver 5 to....
  • The success with this wireless mic system will depend on if you have a decent mixer, speaker or surround amplifier device. The more powerful device....
  • Headset microphone up to 15m (50ft) operating distance with high feedback rejection circuits for reduced interference. Plug and play auto-pairing for....
  • Low battery warning and pairing mode LED lights are featured, along with a discreet microphone volume control setting on the headset..
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm for HF VHF Receiver for Quadrature Modulation for Base Station

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
Check Stock

Mixer Module, 0.1‑500MHz Low Distortion High Frequency Transducer -10dBm Conversion for Base Station for Quadrature Modulation for HF VHF Receiver

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock

FIFINE Ultra Low-Noise 4-Channel Line Mixer for Sub-Mixing,4 Stereo Channel Mini Audio Mixer with AC adapter.Ideal for Small Club or Bar. As Microphones,Guitars,Bass,Keyboards or Stage Sub Mixer-N5

  • ...ols】Audio mixer collecting the sounds from many different sources (microphones, guitars, bass and keyboards.) into one listening place for monitoring or routing. Each channel on the line mixer has an independent volume control separate input plugs and volume controls for each channel with one single output for an amplifier..
  • 【Multifunctionality for a Simplified Setup】The line mixer is ideal for multikeyboard rigs and recording where several channels need to be mixed down to one track. It's perfect for your keyboards, small-stage setups, drum kits, or submixing before going to the main mixer. Modern design looks great on any desktop and large controls are easy to use and low-profile to avoid snagging on wires, clothes, etc..
  • 【Low-Noise 4-Channel Line Mixer】 Mini audio mixer yields the highest sonic quality at all output levels, boasting ultra low-noise operational for outstanding audio performance. No distortion and easy to set up, perfect for mixing 4 line level signals quickly and without complications. 4-Channel mixer produces highest signal quality even at highest levels, in highest signal integrity..
Check Stock

Rockville RPG2X12 Package PA System Mixer/Amp+12\ Speakers+Stands+Mics+Bluetooth

  • ...ghs, 350 Watts RMS / 700 Watts Program Power / 1400 Watts Peak, Molded plastic speaker cabinet for increased sound quality, Two way cabinet architecture, Horizontal / Vertical position for use as stage monitor or PA speaker, Impedance : 8 Ohm, Pole mountable.
  • Features of Mixer: 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity, 17 Inputs! , 2 Speaker outputs and line output to connect a subwoofer or more speakers, USB / SD Input, MP3 Playback, LCD Display, Bluetooth connectivity, 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers, 8 balanced XLR and ¼” microphone inputs, Tape/CD Line inputs, Master volume control, Bass, treble controls, and level controls on each channel.
  • Reverb effect level control on each channel, Digital delay effect with independent level control, Phantom power for condenser mics! , 5 Band graphic equalizer, Line Out for connection to external amplifier, Return input for connection of external effects processors, Record Out for taping, RF interference protection on all inputs, Aux Send Output : -10 dBv nominal, 1k ohms, Tape Rec Output : -10 dBv nominal, 1k ohms, Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms.
Check Stock