Reviews Air Compressor Tank Fittings

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
Check Stock

VIAIR 400P - 40043 Portable Compressor Kit. Tire Pump, Truck/SUV Tire Inflator, For Up to 35 Inch Tires

  • 2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
  • 1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
  • 150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
  • Durable oil-free pump for long life and no maintenance.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
  • Fully enclosed design provides protection from hot or moving parts.
  • 25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.
Check Stock

Maxline Pressured Leak-Proof Easy to Install Air Compressor Accessories Kit Piping System | 1/2 inch x 100 feet HDPE-Aluminum | Connects w/ any Air Compressor Hose | 100 PSI | 35 Pieces | M3800.

  • of 1/2-inch tubing, (3) air outlet kits, compressor manifold kit, (5) elbow fittings, deburr and cutter tool.
  • 175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 2000 sq..
Check Stock

VEVOR PCP Air Compressor, 4500PSI Portable PCP Compressor, 12V DC 110V/220V AC PCP Airgun Compressor Auto-stop, w/Built-in Adapter, Fan Cooling, Suitable for Paintball, Air Rifle, Mini Diving Bottle

  • Set Pressure & Auto-stop: This PCP air compressor features an adjustable pressure gauge and visible thermometer. You can preset the pressure, and the machine will shut off automatically. Meanwhile, an LED temperature display also is convenient for you to monitor the compressor. Parameter: Power 350W, Max. Pressure 4500Psi, Inflating Rate 2700 R/min..
  • Home or Car Battery: The portable PCP compressor can be directly powered by a 12V car battery outdoors or a 110V/220V socket at home. It is very convenient to fill your PCP air gun or paintball tank anywhere. The maximum inflation tank is limited to 0.4 Gal/1.5 L. A 0.5 L tank will take 18 minutes from 0 to 300Bar and 5 minutes from 200 to 300Bar..
  • Built-in Adapter & Fan: This PCP airgun compressor is cooled by a built-in fan, no need for external water or oil, and the power converter is also built-in, easy to operate. The cooling fan is controlled manually.
  • please shut off the compressor and keep the cooling fun running when the temperature reaches 70 ℃..
  • Oil/Water Separator: Our PCP air gun compressor adopts a built-in oil/water separator--- an activated carbon separator on the hose, enabling you to use it repeatedly. It can efficiently filter oil and water in the air and output clean and dry high-....
Check Stock

SMACO PCP Air Compressor 4500Psi/30Mpa High Pressure Air Compressor Paintball Scuba Tank Compressor HPA Pump Fill Station Auto-Stop,Oil-Free Powered by 12V DC or 110V AC with Water/Oil Separator

  • ⚡【BUILT-IN POWER ADAPTER & SIMPLE CONNECTION】: Power converter and compressor are integrated.this is a hpa pump that doesn't need a transformer for wall outlet use,safer to use.SMACO scuba tank compressor can be powered by the 12V car battery, also can be powered by the home 110V/220V AC.This will make this air pumb more usefull as you can use it anywhere..
  • ⚡【SET-PRESSURE & AUTO-SHUTOFF】:The filling of a pcp or paintball air gun is hassle-free. When the air pressure reaches the pressure value we set (the maximum air pressure setting value is 300Bar/4500Psi/30Mpa), the compressor will stop filling. So that you can free your hands, save time.Don't start the machine under pressure!(after the inflation stops halfway,please release the pressure first and then start again).
  • ⚡【DOUBLE FILTRATION & OIL-FREE】:SMACO paintball air compressor uses fan cooling, does not need oil, clean and hygienic, no need for an external water pump to cool. In addition, it is also equipped with an oil-water separator ,the 5μm fiber and active carbon combined filter element can effectively filter moisture and other contaminants in the air, output clean and dry high-pressure air..
  • ⚡【WIRE SPOOL DESIGN& EASY TO CARRY】:The scuba compressor adopts a spool de....
Check Stock

Vertical 30 Gallon Portable Air Compressor - 5.5CFM, 2HP, 120V/240V, Single Stage, 1 Phase (Campbell Hausfeld VT6358) , Blue

  • 2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
  • 1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
  • 150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
  • Durable oil-free pump for long life and no maintenance.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
  • Fully enclosed design provides protection from hot or moving parts.
  • 25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.
Check Stock

Industrial Air IT20ASME 20 gallon ASME Certified Vertical/Horizontal Air Receiver Tank Black 33.4 x 14 x 18.8 inches

  • 2-in-1 multi-function 175 PSI ASME certified air tank.
  • Can be used in either a horizontal or vertical orientation.
  • Works as a horizontal or vertical auxiliary air storage tank with a compressor or as a portable air carry tank.
  • Two air access assemblies, an auxiliary air storage tank to use with your compressor, or a portable carry tank when you are on the go.
Check Stock

Viair 10000 Onboard Air System

  • 1-gallon air system kit designed to work with air horns and lockers.
  • Includes: Air tank, air compressor, omega bracket with mounting hardware, pressure switch (85 PSI on, 105 PSI off), 40-amp relay, 145 PSI safety....
  • 1-gallon air tank and 98C compressor combine for plenty of power.
  • For air horn use, air lockers, and a host of other light duty pneumatic needs.
  • Reliable air source in a smaller volume and a cost-effective package.
Check Stock

VEVOR PCP Air Compressor, Auto-stop Powered by DC 12V Car or Home AC 110V/220V, 4500Psi/30Mpa/300Bar w/Built-in Water/Oil Adapter & Cooling Fan for Paintball, Scuba, Air Rifle

  • Set Pressure & Auto-stop: This PCP air compressor features an adjustable pressure gauge and visible thermometer. You can preset the pressure, and the machine will shut off automatically. Meanwhile, an LED temperature display also is convenient for you to monitor the compressor. Parameter: Power 350W, Max. Pressure 4500Psi, Inflating Rate 2700 R/min..
  • Home or Car Battery: The portable PCP compressor can be directly powered by a 12V car battery outdoors or a 110V/220V socket at home. It is very convenient to fill your PCP air gun or paintball tank anywhere. The maximum inflation tank is limited to 0.4 Gal/1.5 L. A 0.5 L tank will take 18 minutes from 0 to 300Bar and 5 minutes from 200 to 300Bar..
  • Built-in Adapter & Fan: This PCP airgun compressor is cooled by a built-in fan, no need for external water or oil, and the power converter is also built-in, easy to operate. The cooling fan is controlled manually.
  • please shut off the compressor and keep the cooling fun running when the temperature reaches 70 ℃..
  • Oil/Water Separator: Our PCP air gun compressor adopts a built-in oil/water separator, an activated carbon separator on the hose, enabling you to use it repeatedly. It can efficiently filter oil and water in the air and output clean and dry high-pr....
Check Stock