Reviews Cam Lock Tank Fittings

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....
Check Stock

Admiral Locks 5/8” Tubular Cam Lock, Keyed Alike Removable Key RV Compartment Storage Lock Cabinet Locks (5/8 Inch 90°, Chrome Pack of 2)

  • Fits up to 3/8" (9.5mm) thickness ●● Check measurements in photo to ensure which is correct lock for your needs ●● Order multiple sets and all will be keyed the same (all keys will work with all the include locks).
  • INCLUDES 2 LOCKS AND KEYS - Each of our tubular cam locks include 2 keys per lock, a steel cylinder nut, stop cam, 1-11/16” straight cam and cam nut. The tubular lock is manufactured using zinc alloy for its sturdiness, and is chrome plated. Each lock comes with two alike keys, meaning all locks of the same size purchased on this listing can be opened with the same key..
  • NON-KEY RETAINING - For easier use, Admiral Locks Tubular cam lock was designed so that the keys can be removed no matter if it is in a locked position or not..
  • EXTRA SECURITY AND PROTECTION - For an updated security for any type of storage, you can now replace your old locks with Admiral Locks Tubular cam locks. It has a guaranteed quality with mostly 5 stars rating from our customers. You can rest assured that it will work within if not greater than your expectations and will always protect your belongings..
Check Stock

Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support

  • 100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....
Check Stock

Spray Can Spray Can Drop Drop Spray Can Concrete Sound Effects Sound Effect Sounds EFX Sfx FX Household Spray Can [Clean]

  • 3.5-GALLON TRI-POXY TANK: Tri-Poxy coating on the tank provides triple protection against rust, corrosion and damage from denting.
  • WIDE TANK OPENING: 5-inch funnel for easy filling and cleaning.
  • BRASS COMPONENTS: adjustable nozzle, wand, and shut-off.
  • REINFORCED HOSE: 48-inch with threaded fittings.
  • PUMP HANDLE: durable metal with Tri-Lock to tightly seal pump.
Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 23 Gallon & 30 Gallon | RV Water Holding Tanks

  • Combo Pack of 23 Gallon and 30 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials -....
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank,....
  • EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5"....
  • 23 GALLON WATER TANK MEASUREMENTS: 39 1/2" Longest Length (not including fittings) x 14 3/4" x 8 3/4" Tank can sit on any side - rotate tank to change....
  • 30 GALLON WATER TANK MEASUREMENTS: 34 1/2" Longest Length (not including fittings) x 17 1/2" x 12" Tank can sit on any side - rotate tank to change....
Check Stock

Kitmose Cabinet Cam Lock Set, 2 Pack Keyed Alike 1

  • Suitable size- The security cam lock has a 1'' 25mm cylinder length1 7/8'' lock plate length and can fit material thickness of up to 20mm it is a standard size cam lock with 3/4 diameter..
  • Keyed Alike- Keyed cam lock comes keyed alike with two keys per lock - each key will fit with each lock that you purchase. A convenient keyed alike lock set includes 2 locks with 4 keys (including 2 backup keys).
  • Universal Application- Open with a 90 degree turn. It can be mounted on metal or wood panels. Widely used in doors of tabletop showcase, cabinets, file cabinet, desk drawer, mail box, camper or RV doors, etc..
  • Premium & Durable Material- Safety cam Lock are made of zinc alloy, Chrome-plated, waterproof and rustproof performance, resisting corrosion and wear for long-term use, durable and safety for your items..
  • Easy Installation & Protect Privacy This drawer cam lock could be installed quickly and easily, usually be mounted to cabinet doors or panels. It can provide a high privacy for personal belongings and prevent others from peeping. Not only can protect your important items, but you can also protect your child from dangerous items such as sharp tools and inedible supplies..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Chrome Vented Gas Cap Motorcycle Tank Peanut Style Sportster Bobber Harley Davidson Dyna Electra Chopper Bayonet Cam Fuel Caps Custom Bike Builder Shovelhead OEM 61103-36 DS 139552 61102-73 75-003 005

  • Excellent Quality ( Not Made in China ) New Chrome Vented Cam Bayonet Gas Cap Bobber Motorcycle Fuel Tank.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chromed steel. An inexpensive cap that does the job and works with stock ('36 - '82) and aftermarket gas tanks with the bayonet style bung. This vented cap will work on single-cap model gas tanks or for the right-side gas tank on dual tank models gas cap Replaces Harley-Davidson OEM # 61103-36.
  • Chrome Vented Gas Cap for HarIey Gas Tank & Peanut Tank Bobber Style Cap 73-82.
  • Thanks for Looking at our Quality items,Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chro....
Check Stock