Reviews Ac Solid State Relay
uxcell BEM-14840DA 3-32V DC to 24-480V AC 40A Output Single Phase SSR Solid State Relay
- Total Size (Approx.) : 58 x 45 x 32mm / 2.3" x 1.8" x 1.26" (L*W*T).
Check Stockuxcell ASH-25DA Solid State Relay 4-32VDC to 24-480VAC 25A Single Phase SSR DC to AC Relay
- Total Size: 72 x 43 x 90mm/ 2.83'' x 1.70'' x 3.5'' (L*W*H).
- Package Content: 1 x Solid State Relay, 1 x Heat sink.
Check StockAITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)
- Solid State Relay Module Board has been assembled, and electrical test passed.
- Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
- Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
- Load voltage range: 75 to 264VAC (50/60Hz).
- Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Check StockGhost Controls AXXV Wired Vehicle Sensor with 55 ft. Cable for Automatic Gate Opener Systems
- Detects moving vehicles to automatically trigger your gate to open when exiting your property.
- Comes prewired with solid state relay output and 55' cable to connect to your automatic gate opener system.
- Designed specifically for Ghost Controls gate opener systems but will work with many other brands of automatic gate opener systems with 10-16 Volt AC or DC Accessory Power available.
- Should be buried at least 12" below the surface and within 3' of driveway that moving vehicles use to exit property.
- This allows easy exit from your property for everyone, even family and friends who do not have a remote transmitter in their vehicles.
Check StockTWTADE SSR-40VA 500K ohm 1/4W to 24-380VAC 40A Single Phase Solid State Relay Resistance Voltage Regulator Authorized+Heat Sink+Potentiometer+A knob
- Specifications: This is solid state relay SSR-40VA..
- Input Resistance/Power: 500Kohm/2W Output voltage: 24-380V AC.
- Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19".
- Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ).
- Package Content: 1 x SSR, 1 x heat sink, 1 x 470Kohm potentiometer ,1 x knob.
Check StockCGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink
- ♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA,1 x K type thermocouple,1 x heat sink..
- ♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz.
- working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ;storage temperature:-25℃~65℃(avoid ice or dew);resolution:1℃,0.1℃(adjustable);wiring method:terminals;accuracy:+0.5%FS.
- installation environment:installation type ll, pollution grade 2 (IEC61010-1).
- max current: 30mA, load resistance:≥1K..
- ♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output.
- digital display of real-time and set temperatures,adjustable degrees ℉ and ℃..
- ♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H).
- ♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc..
Check StockCG Solid State Relay SSR-25DA DC to AC Input 3-32VDC To Output 24-480VAC 25A Single Phase Plastic Cover…
- ♥【What You Get】Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster..
- ♥ Product Name: solid state module relay SSR-25DA, 3-32VDC/24-480VAC.
- ♥ Total size (approximate):58 x 45 x 32mm/2.3" x 1.8" x 1.26" (l*w*t).
- Material:metal, plastic, electronic parts..
- ♥ SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics..
- ♥ Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check StockCGELE Solid State Relay SSR-25AA AC to AC Input 70-250VAC to Output 24-480VAC 25A Single Phase Plastic Cover
- ♥【What You Get】Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster..
- ♥ Product Name: solid state module relay SSR-25AA, 70-250VAC/24-480VAC.
- ♥ Total size (approximate):58 x 45 x 32mm/2.3" x 1.8" x 1.26" (l*w*t).
- Material:metal, plastic, electronic parts..
- ♥ SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics..
- ♥ Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check StockCG Solid State Relay SSR-80DA DC to AC Input 3-32VDC To Output 24-480VAC 80A Single Phase Plastic Cover…
- ♥【What You Get】Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster..
- ♥ Product Name: solid state module relay SSR-80DA, 3-32VDC/24-480VAC.
- ♥ Total size (approximate):58 x 45 x 32mm/2.3" x 1.8" x 1.26" (l*w*t).
- Material:metal, plastic, electronic parts..
- ♥ SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics..
- ♥ Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check Stock