Reviews 60 Bar Test Pump

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

SINOCMP Hydraulic Pressure Test Kit with 5 Gauges 5 Test Hoses 13 Couplings and 14 Tee Connectors Pressure Gauge Kit Test Kit for CAT/CASE/John Deere Excavator Construction Machinery

  • Suitable for Komatsu/HITACHI etc brand excavator.
  • 13 couplings attached, 14 tee connection, 5 test hoses: 61.5 inch long, sturdy case..
  • Max working pressure: 600 Bar/10000 PSI/ 60 Mpa..
Check Stock

SMILEFS 0-100PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit (9 Piece Set) - Automotive Diagnostic Test Measurement Tools Car Styling (Color : Black)

  • TU-113 Car diagnostic tool fuel pressure gauge gasoline cars trucks..
  • Test gasoline fuel pump pressure on most fuel injection equipped vehicle..
  • Gauge calibrated from 0-100 PSI (0-7 bar)..
  • Indicates if fuel pump is defective or inconsistent in pressure flow..
Check Stock

Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.

  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
  • And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
  • Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
Check Stock

GX M6 3 Stage High Pressure PCP Hand Pump, External Moisture- Oil Filter, 30Mpa/4500Psi PCP Air Rifle Filling Stirrup Pump,Stainless Steel Body for Paintball,Scuba Diving

  • More labor-saving 3-stage PCP Hand Pump: Comparing with the other model GX-H4 , this pump adopts new design. You can save much energy in every stroke. It also means the same air tank should need more fills than H4 model. Test inflating fills: 500cc tank from 1000psi to 3000psi needs 420 fills.
  • 200cc tank from 1000psi to 3000psi needs 180 fills..
  • Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours..
  • External Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. When the blue desiccant become red after absorbing enough water, you can pour them out for dring by referring to the user manual. Note: This filter can only use for pcp filling .we suggest you buy a new breathing filter if you inflate scuba diving tank..
  • Specifications: General Output nut: M10*1 (not G1/8) , 8mm wide use quick connector, Max pressure : 310 bar or 4500 psi, Light weight 2.7 kg, Portable size: length 62cm/24.5inch closed, 105cm/41.3inch open.
  • What You Get: GX PCP Hand Pump, user manual, access....
Check Stock

COFORCEFLO 110V Self Priming Water Pump ,5.0 GPM 70 PSI Water Diaphragm Pump,Water Booster Pump with Built-in Pressure Switch for Home Kitchen Bathroom RV Marine Yacht Garden Hose (AC 115V 5.0GPM)

  • [Utility Diaphragm Pump Features] 110V Water Pump features 5.0 gallons per minute water flow, the fast speed at which the water gets released makes using it a breeze. Pressure switch is set to 70PSI 4.8Bar 1.8 Amps..
  • [Widely Applications] 115 volt water pump can be used for Kitchen, bathroom,Marine, Yacht, Caravan and courtyard long-distance pumping, watering and cleaning..
  • [Run Dry & Thermal Overload Protection] 110 Volt Self Priming RV AC Wash down Pump can run dry for a short time, reducing the risk of motor burnout..
  • [Smart Pressure Switch] Built-in automatic pressure switch.The pump turns on when the water flow is on and stops when the water flow stops.
  • [Strict factory test] When the pump leaves the factory, a small amount of water may remain in the pump. This is due to strict tests on the pump to ensure quality and meet the testing standards..
Check Stock

Pikwo 144 PC JIC and ORFS Master Industrial Hydraulic Cap and Plug Hose Tube and Pipe Fitting Kit Cap and Plug Kit Precision Threading in ORFS and 37° Dash Sizes 4 6 8 10 12 16

  • Suitable for Komatsu/HITACHI etc brand excavator.
  • 13 couplings attached, 14 tee connection, 5 test hoses: 61.5 inch long, sturdy case..
  • Max working pressure: 600 Bar/10000 PSI/ 60 Mpa..
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock