Reviews 60 plasma

ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine

  • 【High Efficiency & Energy Saving】-- ZENY cutter machine by using inverter technical of switch power, stable and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, as well as the efficiency is increased by 30%. Improved cooling method for the cutting torch.
  • greatly makes the cutting consumables more endurable..
  • 【 110V or 220V Dual Voltage】-- The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed..
  • 【Compact Design & Widely Applications】-- This ZENY compact plasma cutter has a handle for portability. Easy taking.The net weight is 22.5LB. It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specification for Cutter Machine】-- Voltage: 110/220V, 60HZ, 4.8KVA.
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

SL60 Torch Parts 5-0075 Electrode 40-60A Tip 9-8237 Shield 9-8281 Standoff Fit Thermal Dynamics Cutmaster 52 or 82 SL60 Torch Consumables 19pcs

  • for Torch SL60 or SL100 Plasma Cutting Hand Torches Specific To The Cutmaster true (52, 81, 82, 102 And 152) Series Systems.
  • 7 pieces x Drag Tip (40A 9-8207 & 60A 9-8210) + 3 pieces x 9-8215 Electrode.
  • 9-8281 Stand off Guide + 9-8235 Drag Shield Cup + 9-8237 Shield Cap (Replacements).
  • Original Front & Rear O-Ring 8-3486 & 8-3487.
  • 19pcs plasma consumables (#5-0075) for Thermal Dynamics Cutmaster SL60/SL100 Torch.
Check Stock

Thermal Dynamics 9-8213 Replacement Start Cartridge

  • Suitable for all Cut Master series plasma cutters.
  • Unique design allows the pilot arc to start without moving consumable parts.
Check Stock

212724 Plasma Electrodes Fit For Miller ICE-60T 80T Plasma Cutting Torches 5pk

  • For Miller ICE-60T 80T Plasma Cutting Torches.
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • [DEEP CUTTING CAPACITY & FAST SPEED CUT] Our Re-Engineered High-Performance Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect....
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

LOTOS LTP6000 60Amp Non-Touch Pilot Arc Plasma Cutter, Brown, 3/4

  • Current 200~220V, 1PH, 50A. Recommand Circuit Breaker Size: 50AMP..
  • NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. 2T/4T ENABLED: Release your finger for long time cut THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP6000 Plasma Cutter are: PCON40 and PCON90. Please search "Lotos PCON40" or "PCON90".
  • BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min..
  • PACKAGE INCLUDES: 60AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc..
Check Stock