Reviews 5050 Strip

10-Pack L Shape Connectors and 10-Pack Waterproof LED Strip Clip Connectors, JACKYLED 10mm Wide 4 Pin Unwired Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

  • MAX WATTAGE: 72W max wattage, these 4 pin connectors can use low wattage and high wattage led light strip. Handy tool for a firmly stable connection,no need to solder..
  • FIREPROOF MATERIAL: The led connectors are not like some cheap thin plastic kind. They are made from PBT material, heat resistant, Anti-burning, No Fire Hazard..
  • APPLICATION: The L shape connectors fit all 10mm wide 4 pin 3528/5050 wide RGB LED strips. While the 4 pin led connectors only suitable for 10 mm wide waterproof 5050 led strips. Perfect for LED light DIY project..
  • EASY TO USE: No soldering required. Simply connect the 4 copper contacts on the back of the prepared LED strip with the 4 pins of the led connectors, and then close the connector clips firmly to connect..
  • PACKAGE: 10pcs l shape led connectors, 10pcs waterproof led strip connectors.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Working condition: these LED light strip connectors are able to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

RGB LED Strip Lights 16.4ft,4096 DIY Colors Rope Lights with Memory Function, Self-Adhesive Color Changing Light Strip with Remote, 30mins Timing Off LED Tape Light Kits for Home Decor

  • 4096 DIY Colors RGB Led Strip Lights: The 32.8ft rgb led light strip built-in premium SMD 5050 leds. Select any color, then use R/G/B buttons by increasing or decreasing its brightness will create 4096 DIY static colors options to satisfy your various kinds of lighting needs. And it is great for home, kitchen,cabinets,living room,bedroom etc.decor.
  • 6 Color Changing Modes: The color changing led strip lights built with premium SMD 5050 LEDs, will gives off jumping, flashing and gradient light modes, which is great for music studio,TV,gaming,bar,performance party to use. And it is with memory function, can restore to its last time color and brightness to save your time effectively.
  • 30mins Timing Off Mode: Click the sleep button, its color will be orange to create a sleeping ambience, to promote you go to sleep quickly. After 30mins, the smart led strip lights will turn off automatically, won’t disturb you at night.
  • Easy to Use: No assembly required.Plug adapter to outlet,strip light will work. This led rope lights' backside with adhesive foam tape can be sticked to smooth or irregular surface, and it also comes with extra adhesive clips and screws for fixing firmly.
  • Flexible and Safe to Use: 24v led light strip built on single-sided board is flexible and....
Check Stock

DAYBETTER Led Strip Lights 16.4ft Waterproof Color Changing Led Lights with Remote Controller

  • Self adhesive: Led lights strip has double adhesive so that they can stick well.
  • Tape light features: The led strip lights make of 5050 led chip allows and can use outdoor.
  • Cuttable and linkable: The led strip can be cut and linked with another strip led lights.
  • Color changing: The lights can offers 44 different colors and modes.
  • Remote controller：The led lights kit can changing colors by remote.
Check Stock

Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)

  • Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
  • Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
  • Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
  • Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
  • Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.
Check Stock

32.8ft Led Strip Lights, OSSLOVE 5050 RGB LEDs Color Changing Light Strips, Led Lights for Bedroom, Home Decoration, with IR Remote Control, DIY Mode, ETL Listed Adapter(2 Rolls of 16.4ft)

  • All In One Kit: HitLights 3 Pre-cut strip lights including a 21 key RF remote, 12V DC power supply, Total 36Inch (12Inch *3) 5050 LED Strip lights, three plug and play extension wires (12 inch), Six adhesive backed wire clips to keep things neat.It can fully meet your various needs for DIY..
  • High Quality RGB Strip: PCB board with double layer copper and 36 super bright 5050 leds. The lighting color is pure, more stable and brighter. The best choice for TV backlight, PC gaming light, behind wall decor light, showcase display light, under cabinet light, shelf light, Collection cabinet, fish tank background light, etc..
  • 360°RF Controller: The remote comes with 12 colors and 19 modes switch, adjustable brightness and speed. Easily control your LED strip lights within 49-66ft without failure due to obstructions..
  • Upgrade Blue 3M Adhesive: In order to solve the customer's troubles of the light strip adhesive, we have used upgraded 3M Blue Adhesive and adhesive backed wire clips for solve this problem. No need to worry about the falling off of the adhesive.The 12V adapter has UL certification, which is safer to use and more durable..
  • HITLIGHTS Quality. Backed by a ONE year from HitLights for peace of mind. Contact our US-based customer service team at any time....
Check Stock

HitLights LED Strip Lights 3 Pre-Cut 12Inch/36Inch LED Light Strip Flexible Color Changing 5050 LED Accent Kit with RF Remote, Power Supply, and Connectors for TV, Home, DIY Decoration

  • All In One Kit: HitLights 3 Pre-cut strip lights including a 21 key RF remote, 12V DC power supply, Total 36Inch (12Inch *3) 5050 LED Strip lights, three plug and play extension wires (12 inch), Six adhesive backed wire clips to keep things neat.It can fully meet your various needs for DIY..
  • High Quality RGB Strip: PCB board with double layer copper and 36 super bright 5050 leds. The lighting color is pure, more stable and brighter. The best choice for TV backlight, PC gaming light, behind wall decor light, showcase display light, under cabinet light, shelf light, Collection cabinet, fish tank background light, etc..
  • 360°RF Controller: The remote comes with 12 colors and 19 modes switch, adjustable brightness and speed. Easily control your LED strip lights within 49-66ft without failure due to obstructions..
  • Upgrade Blue 3M Adhesive: In order to solve the customer's troubles of the light strip adhesive, we have used upgraded 3M Blue Adhesive and adhesive backed wire clips for solve this problem. No need to worry about the falling off of the adhesive.The 12V adapter has UL certification, which is safer to use and more durable..
  • HITLIGHTS Quality. Backed by a ONE year from HitLights for peace of mind. Contact our US-based customer service team at any time....
Check Stock

Feit Electric BPESL13T/GU24/41K/6 60W Equivalent Cool White Twist Non-Dimmable CFL Light Bulb 4100K 6-Pack

  • QUICK AND FLEXIBLE CONNECTION: Connect rgbw strips to wire without stripping insulation, no soldering. The Alightings 5pin led light connectors are....
  • FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these rgbw 5 pin led connectors with 22 gauge 5 conductor extension....
  • STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20/ IP65 10mm width 5050 RGBW 5 Soldering Pads....
  • SOLID & EFFECTIVE CONNECTION: High quality tin plated copper core and PVC plastic wire cover ensure steady, safety and long-lasting connection, firmly....
  • SOLDERLESS AND CONVENIENT: Simply slot the strip light and 22awg wire into connector and clamp the cover. Fits all 10mm width 5050 RGBW LED strips.....
Check Stock

Kit Accessories Controller + 44-Key IR Remote Control

  • ◆ Fit for RGB LED Strip Light: Suitable for 5050, 3528, 2835 RGB led strip light with 4-Pin connectors. Not for RGBW strips which has 5-pin....
  • ◆ IR remote control: The working range of the remote control is 30 feet.
  • please note that the remote control must be pointed at the controller....
  • ◆ Multi-function: has 12 kinds of static colors, brightness adjustment.
  • Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
  • ◆ Safe to Use: Input DC 24V, Max output current is 5.8A. The remote controller is Low voltage, Low heat, no radiation, it is safe and touchable.
  • ◆ 1 to 2 Controller: This led strip Controller can connector 2 roll led strip.
Check Stock