Reviews 1 4 Inch J bolts

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includes ....

Our j-bolt hinge is the perfect complement to your door or swinging gate.
The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
For a more in-depth breakdown of dimensions see product images.

This Clam holdback pair includes two finials, two J hooks and mounting hardware.
Each finial size: L: 3-1/2 inch, W: 2-3/4 inch.

TALL SQUAT STAND: Featuring (2) 91-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing....
INCLUDED STANDARD J-HOOKS: Our standard, default J-Hook features UHMW plastic core on the backside and the clasp to protect the bar's knurling and the....
STANDARD PULL-UP BAR: Our standard, default front crossmember is the T-3 Series Single Pull-Up Bar with a 1.25-inch diameter. This bolt-on bar....
DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series....
HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Tall Squat Stand. For safety reasons, Titan recommends a....

Deadbolt bore hole and handle set hole must be 5-1/2" apart for proper installation. front door handle set optional through bolt adjustments design for worry free installation..
Full Escutcheon HandleSet Heavy duty high grade security hardware locksets, entry door knob and deadbolt lock set Includes a reversible handle that makes it perfect for fitting left or right handed doors.
Uniquely crafted low profile XL square shaped full panel 1 piece exterior door handle entrance set and deadbolt with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker.
Durable & Portable front entry door handle set secure lock set handleset oil rubbed bronze finish lever front door knob and deadbolt set which Fits 1-3/8-Inch-1-3/4-Inch doors, inactive handleset dummy conversion kit now available search for: B08W8QG85J.
Designed to complement modern contemporary style exterior doors for commercial and residential applications, Front door handle lock comes with a single cylinder deadbolt that that is opened by an exterior key KW1 keyway for front doors, oil rubbed bronze color entry door handle lockset set.

Used to hold common plastic storage bins or totes, and easy to install system that allows you to utilize unused ceiling space for storage.
Allows for easy access to any tote without having to move anything. bins slide in and out effortlessly.
Each set can hold 2 storage totes up to 50 lbs. each and each new set adds 4 more totes. can be combined with other sets to expand storage capacity.
Included are 4 removable J-hooks that can be used to store miscellaneous items like bikes, garden tools, hoses, and toys. Weight should be limited to....
Each set includes 2 pieces of Tote Trac, 4 screw plates, 8 stabilizer brackets, 4 J hooks, 4 # 1/4 in. x 3 in. lag bolts and 4 washers. NOTE: Totes....

Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
Designed for batteries 6.89" (175mm) wide or slightly narrower..
Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).