Reviews Astm J bolts

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
J-Bolt thru post hinges are easily adjusted even after the gate is installed.
Nuts for gate hinge are included - Washers are NOT Included.

【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..

【STRONG ASTM TESTED 800 LBS. WEIGHT CAPACITY】- Don't put your safety in the hands of a squat rack that hasn't been tested. Our Squat Rack was ASTM....
【SOLID STEEL LONG SAFETY ARMS】- Other companies provide hollow tubes, not us. Have peace of mind knowing that our safety arms are solid steel....
【MULTI-GRIP & REVERSIBLE PULLUP BARS】-Wide grip, narrow grip, hammer grip pullups are all available with this power cage. Can be reversed to lower....
【STANDARD SIZED 1" HOLES】- Makes your squat rack compatible with standard sized attachments such as J hooks, Dip bars, Weight storage bars etc....
【TWIN SUPPORT BRACES】-Makes this power cage strong and sturdy. Lower brace also acts as a feet support when using the Low Row Cable attachment.

J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
J hinges made of heavy and strong iron, you can use it for a long time..
The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
Product dimensions: please see product images..
Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..

Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
many additional accessories available for purchase.

2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant.

Compatible with deck heights of 53 to 60 inches.
Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
One-piece construction for easy assembly.
Shipping dimensions -118” x 17” x 26”.
Limited Lifetime against cracking and fading.
Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..

Mill certified Grade 2 SAE J429 shear bolts, stronger than typical hardware store ASTM A307 bolts..
Nyloc nut prevents loosening from vibration..
Kit includes 5 shear bolts and 5 nylon locknuts..
Universal Size for Rotary Cutters: 1/2" Diameter, 3-1/2" Length. Compatible with most rotary cutters such as Bush Hog and King Cutter..
Zinc (Cr+3) RoHS compliant finish prevents corrosion..

Penetrates quickly to free severely frozen or rusted bolts and parts contains Teflon fluoropolymer for lubrication of freed part.
Provides long-term rust protection using advanced corrosion inhibitors.
Surpasses 1000 hours in ASTM humidity cabinet rust test.
For use on stuck bolts, nuts, pipe threads, valves and other rusted metal parts.
Low odor non-staining does not contain silicone.