Reviews Zhiyun Stabilizer

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

  • ...r 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
  • 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
  • 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig M....
Check Stock

SMALLRIG Universal Wooden Left Side Handle for DJI Ronin S/Ronin SC/Zhiyun Crane 2 / Crane V2 Series Gimbal Stabilizer w/Cold Shoe, 3/8'' Locating Holes for ARRI Standard - 2222

  • 【HIGH CUSTOMIZATION】Universal Wooden Left Side Handle 2222 is exclusively designed for Ronin S / Ronin SC / Zhiyun Crane 2 / Crane V2 Series Gimbal Stabilizer. Attached to the bottom of gimbal via two detachable screws (1/4 and 3/8 screws, perfect for RoninS). Comfortable to hold and effective to improve your shooting experience.
  • 【WELL-BALANCED】Assist in the stabilization so you could get a better grip on your rig so as to get a better movement. With the built-in cold shoe, you can attach a SmallRig Shoe Mount 1875 (ASIN: B01M3SHVGX) to mount a monitor onto it.
  • 【MUTILPLE CONNECTIONS】Features 1/4 threads, 3/8’’-16 locating holes for ARRI standard that allows you to attach more accessories, such as Smallrig Ballheads 2070. With the 1/4 and 3/8 threaded holes at the bottom of the handle, you can attach the original tripod or base plate (SmallRig Baseplate for Manfrotto - 1280).
  • 【SCRATCH RESISTANCE】The rubber cushion on the bottom is helpful to protect from scratching.
  • 【WHAT YOU GET】A Wooden Handle, friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty.
Check Stock

DF DIGITALFOTO Thanos-SE Support Vest Rig System,Filmmakers Kit Gimbal SteadiCam Compatible with DJI RS2/RS 3 PRO Mini/Ronin S,ZHIYUN Crane 3S for Videographer Smoothing footage 4.4-17.6 lbs Load

  • 【Capture Stable Videos】: This camera gimbal stabilizer allows you to shoot for long periods of time with heavy equipment, without straining your hands. The flexible rotatable yoke enables you to achieve low-angle shots with the camera inverted, and the stabilizer improves video stability by up to 30%, giving your videos a professional look. This is the perfect accessory for handheld electronic gimbals..
  • 【Universal Compatibility】: Our gimbal support system is compatible with a wide range of single-handed gimbals including DJI RS/RS2 RSC/RSC2/RS3/RS 3PRO, ZHIYUN Crane2 Crane 3S, and can be connected to the 1/4 or 3/8 threaded hole at the bottom of the gimbal. This makes it a versatile accessory that can be used with various gimbals..
  • 【Strong and Durable】: Our mechanical spring arm can handle photographic equipment weighing 2.5-9kg, thanks to its tension adjustment. You'll get 2x 0.95kg and 2x 0.5kg weights to help you balance your equipment. The carbon fiber balance bar, called trinipod, adjusts the center of gravity to achieve the perfect balance. The spring arm is made of high-quality aluminum alloy, and the vest is composed of metal and fabric, mak....
Check Stock

Zhiyun Smooth 5 Professional Gimbal Stabilizer for Smartphone, Handheld 3-Axis Phone Gimbal, Portable Stabilizer for Vlogging, YouTube, Tiktok, Live Video Compatible with iPhone and Android

  • PORTABLE AND FOLDABLE - Smaller and more lightweight, Zhiyun Smooth 5 is only 60% the size of Smooth 4. With Zhiyun customized carry bag, pack your Gimbal, tripod, smartphone lens and charging gear orderly.
  • STEADY AS A ROCK - Differ from the anti-shake solution by cropping and suppressing image quality, and the solution that is limited by the camera module structure, the smartphone gimbal offers anti-shake performance with high definition, preserving the original video quality of the smartphone. Enables cinematic and creative movements for the video, providing users an experience to make smartphone films like the cinema films.
  • SHINE IN EVERY ANGLE - Attach the magnetic fill light for 360° all around lighting on both sides of the new phone clamp, you can enjoy outstanding lighting backed by the 5300K-5700K color temperature. Also, you can change the colors using the light filters.
  • SMARTFOLLOW 4.0 - Press the button, activate the SmartFollow, and start centering your object. You can also use a gesture to control camera filming/photo-taking and enable face tracking at distance.
  • GOLD - STANDARD SERVICE - All ZHIYUN Gimbal enjoy a 1-year limited warranty, 100% MONEY-BACK. If you encounter any issue after you place an order, please feel free to contact us!.
Check Stock

Carbon Fiber Extension Pole,Fast Twisting Lock 4 Section Tube,1/4' Screw Mount Compatible with Camera Phone Gimbal Video Stablizer,Lightweight Camera Stick for Photography

  • ... stick to lock or unlock to extend the stick length. From ground level to overhead position (drone perspective), helps getting wider and higher view in photography and video shooting, raising your production values to the next level..
  • 【High versatility】: Standard 1/4" Screw for wide mounting. Suitable for gimbal stabilizer including DJI RONIN S / RONIN SC / OSMO Mobile 2 / OSMO Mobile 3 / OM 4/ ZHIYUN Crane V2 gimbal stablizer. Can be used on DJI action camera Gopro DSLR camera mirrorless camera cell phone as a selfie stick, or you can mount on other devices with 1/4 inch thread,mount on tripod through the 3/8" screw hole at the bottom to extend the height..
  • 【Higher Load capacity】: Payload up to 33 lb(15kg) lbs at the maximum extension. Exceptionally lightweight only 6oz (172g) with a full carbon fiber tube..
  • 【Full extended is more than triple compared to the Minimum working length】: This extension stick have 4 section carbon fiber tube,can be extended between 12"(30.5cm) to 40"(101cm), carry size is 1.3" x 1.3" x 12"(33 x 33 x 305 mm)..
Check Stock

DF DIGITALFOTO Thanos Pro II Support Vest Steadicam System for Crane 3S RS 2/RSC 2 RS 3 PRO Gimbal with Rotating Monopod Compatiable with All Gimbals with 1/4 or 3/8 Inch Screw Hole

  • 【To make a more stable video】: This camera gimbal stabilizer can free your hands, suitable for long-time shooting scenes with heavy equipment. It can improve the stability of the video by 30%, and the flexible rotatable yoke can meet the low-angle shooting with the camera inverted. Make the photographer's video more professional, it is the perfect match for the handheld electronic gimbals.
  • 【Broad applicability】: This gimbal support system can be suitable for any type of single-handed gimbal, including DJI RS/RS2 RSC/RSC2 ZHIYUN Crane2 Crane 3S etc. Connect to the 1/4 or 3/8 threaded hole at the bottom of the gimbal..
  • 【Strong loading】: The mechanical spring arm can carry photographic equipment weighing 2.5-9kg through tension adjustment. Includes 2 0.95kg and 2 0.5kg weights to help adjust the equipment balance..
  • 【High-quality materials】: The retractable carbon fiber balance bar is called trinipod, which adjusts the center of gravity to make the equipment reach the most perfect balance. The spring arm is made of high-quality aluminum alloy, and the spring tension can be controlled by adjusting the knob. The vest is composed of metal and fabric, comfortable to wear and durable..
  • 【Value-added accessories】: Comes with V mount battery powe....
Check Stock

Superpunch Cutaway Stabilizer For Embroidery Machines - 12' x 10 yards roll, White SuperStable Machine Embroidery Stabilizer Backing, 2.0 Oz Cut Away Embroidery Stabilizers

  • High-Quality Cut Away Stabilizer: Do you need a quality embroidery backing stabilizer? Look no further. Our cutaway stabilizer embroidery White 2.0 oz 12" x 10 yards roll is perfect. This embroidery stabilizer is designed to cut away excess stabilizer from fabric and then trimmed close to stitches, its wet laid non-woven backing gives you a clean cut-away. 2.0 oz weight helps retain your design's shape even after repeated washing..
  • Machine Embroidery Stabilizer Backing: Embroidery stabilizer backing is an essential tool for your machine embroidery projects. From thread stretching to applique and decorative stitch sewing, fabric stabilizer provides backup support that prevents fabric puckering and shifting. So, if you’re looking for a professional-looking finish to your designs, an embroidery stabilizer is just what you need!.
  • Easy To Use: The convenience of using superstable embroidery stabilizer is undeniable. The lubricants contained within each role make needle gliding easy, allowing for a smooth and efficient experience. Not only do these cut-away stabilizer roll make the embroidery process more enjoyable, but it also saves valuable time. Whether working on projects for yourself or a customer, this easy-to-use embroidery stabilizer cutaway stabil....
Check Stock

Gimbal Stabilizer with Selfie Stick for iPhone: Portable Handheld Gimble with Tripod & Remote for Cell Phone Camera & Samsung Android Smartphone Recording Video & Vlogging on Tiktok & YouTube

  • Multifunctional Phone Stabilizer - This gimbal stabilizer consists of a phone stabilizer, a phone tripod, and a selfie stick.
  • If you like taking family vlogs, selfies, and tik tok videos, this phone gimbal stabilizer will help you recording short videos and photos more easily and conveniently.
  • Bringing this stabilizer to travel means you won't have to bring an extra tripod stand, and a selfie stick anymore.
  • Stabilizer for Phone taking Videos - The stabilizer is sensitive and accurate.
  • When you use the phone stabilizer to take videos, it will effectively help you reduce the effect of shaking, especially when you're recording videos while walking, or moving the phone camera.
  • Use this gimbal stabilizer, you can also get the professional video effect like other YouTubers and Vloggers by only using your iPhone.
  • Selfie Stick Function - This handheld gimbal stabilizer can also be used as a selfie stick.
  • The body of the selfie stick is made of new metal material, it's more durable and sturdy but weighs very light.
  • There's an angle-fixed lock at the back of the stabilizer, it can fix the angle of the phone mount, so you can turn the stabilizer to a selfie stick easily and use it as a general selfie stick.
  • Phone Tripod Stand with Stabilizer - There's a tripod fol....
Check Stock

ULANZI ST-06 Camera Hot Shoe Phone Holder Flexible Phone Tripod Mount Adapter w Cold Shoe Mount for Microphone LED Light for DJI Ronin SC iPhone Samsung Canon Nikon DSLR Camera Ring Light Photography

  • Cold Shoe Bracket Extension Bar- Ideal for Vloggers and Content Creators! This cold shoe bracket is a perfect solution to mount your microphone on Sony A6400 6300 6500 6000, Canon G7 X , Nikon Small Vlog Cameras, etc. And to mount your led video light on Gimbal Zhiyun Smooth 4 DJI Osmo Pocket and more..
  • Camera Tripod Bracket- Standard cold shoe type allows to attach additional microphone or small led video light, necessary for vlogging. Cold shoe mount extends to prevent obstruction to the flip-up screen of the mirrorless camera..
  • 1/4”-20 Tripod Screw- Universal 1/4” screw on top for mounting on small camera, osmo pocket (tripod adapter required), zhiyun gimbal and other devices with 1/4” screw hole. With 1/4” threaded hole on bottom for mounting on tripod..
  • Super Lightweight & Portable,Perfect for Vlogging- Weight only 1.23oz with length 4.7inches and the adjustable range of hole from 2.95 to 3.33 inch, cause no extra burden even you use handheld tripod for video vlogging, recording, live streaming..
  • Sturdy & Durable - Made of solid aluminum metal. Precise CNC machining and black anodized treatment for higher durability..
Check Stock