Sensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings

  • Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
  • Included temperature and light sensors monitor ambient temperature and light.
  • Communicates with Z-Wave devices up to 131 feet (40 meters).
  • Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Nanlite PavoTube 30C 4 ft RGBW LED Tube with Internal Battery

  • Siren 6 is your home’s smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with....
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 Buttons, each sold separately.
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave....
Check Stock

GE 12729 Z-Wave Wireless Lighting Control Smart Dimmer Toggle Switch, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day..
  • Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting On/Off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).
Check Stock

Honeywell YTH8320ZW1007/U Z-Wave Enabled Programmable Thermostat

  • Please refer Page 18 and 19 of User manual for troubleshooting steps.
  • Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller.Wire saver allows for use without a common wire..
  • Intuitive adjustment for precise comfort control, easy to use touch screen display and extra large backlit display with natural language.
  • Menu Driven programming guides the user through the programming process only showing necessary information and choices on each screen.
  • Thermostat operating message feature sends a message containing the status of the HVAC equipment.
  • The YTH8320ZW1007 includes the TH8320ZW1000 thermostat plus the THP9045A1023 wiresaver module..
  • This thermostat only connects to a z-wave communicating system (not Wi-Fi). Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller. The THP9045A1023 wiresaver module must be used when there is no “C” or common wire. A common wire is required to power the thermostat.
  • Menu Driven programming guides the user through the programming ....
Check Stock

ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control to Lights and Ceiling Fans, 120-277VAC, 10A, Neutral Wire Required, ZWN-RSM1-PLUS, Black

  • Z-Wave micro switch installs behind an existing wall switch to upgrade it into a Z-Wave switch. Upgrade home automation system while keeping your original switches.
  • Wirelessly control your appliances (lights, fans) from an internet-connected smartphone, tablet, or computer.
  • Utilizes Z-Wave Plus featuring improved battery life, wireless range, increased bandwidth.
  • Acts as a Z-Wave repeater to extend the range of Z-Wave signal up to 100ft.
  • the switch will still work if the module fails.
  • Z-Wave hub and neutral wire required. Single Pole, 120-277 VAC, 50/60Hz, Up to 150ft Range, 10, 000mA (10A) Maximum Load, 908. 42MHz, Slim Design - Dimensions: 1. 63" x 1. 63" x 0. 82". FCC and ETL listed. 1-year.
Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

  • Zwave Door Sensor: Built in the Aeotec 700 series, Z-Wave Plus V2, which will deliver a significantly improved your experience by mandating the inclusion of SmartStart, a setup feature that will truly bring plug and play to the your smart home. Comprised of two parts: the main z-wave door sensor and the magnetic door contact sensor.
  • Smart z-wave door sensor: Removing the complexity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you. Smart door open sensor.
  • Safer than the previous z-wave recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
  • Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
  • Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry ab....
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock