Reviews Workshop Machinery

Heavy Duty Adjustable Furniture Leg Leveler w/Lock Hexagon Nuts - 2000 Lbs(Set of 4)

  • Heavy duty-Set of four levelers can holds Up to 2000 Lbs. Leveler Total Height: 3 Inches.Leg Base Diameter: 1-1/4 Inches.2 Inches Height Adjustable..
  • Free spinning foot - inner hexagon spanner for adjust ,Compensates for irregular floors. base with plastic protective cap can protects floors and block any moisture from getting to the foot. No more rust spots left on the floor surface..
  • Multipurpose-It is good for tables, shelving units, cabinets, furniture legs and a whole lot more.And also can be used for outside furniture and perfect for the workshop or garage, especially if vibrating machinery is involved..
  • Easy to adjust- adjust with the included-inner Hex Key Wrench. The unique design of the leg leveler allows for easier access to the adjustment bolt. This will be allows to micro adjust each leg until they are perfectly level to your desired height..
  • You can get 4 Heavy Duty Leg levelers w/lock nuts, 32 Installation screws, one 5mm inner hexagon spanner..
Check Stock

TEXALAN 20T 2Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 50mm Hydraulic Lifting Cylinders

  • [SIZE]: Diameter of spindle:2 inches（50mm)；Holding capacity：20T..
  • [MATERIAL]: With heavy metal structure, our hydraulic cylinder jacks are durable and can be used for a long time. Painted surface to prevent scratches and corrosion..
  • [LARGE CAPACITY]: Our ram hydraulic cylinders are designed to provide reliable support during operation. There is no card mark when lifting, large size 20 T/44000 LBS tonnage, enough stroke (50 mm/2 inches)..
  • [EASY TO USE]: The quick-connect head is equipped with a dust cover to prevent dust from entering the socket, and the connection is firm and leak-free. The structure is compact and the operation is simple. The hydraulic convex cylinder adopts smooth surface and round texture to provide reliable support during work..
  • [WIDE USE]: This hydraulic jack cylinder has the advantages of small size, suitable for narrow spaces. It is a good helper for electrical, chemical, steel, bridge, machinery and other industries as well as fitters, welders, car body, frame workshop..
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • ...any of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision..
  • Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD a....
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

4 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 4 inch Turnkey Stainless Steel Hose Clamps

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them..
  • 304 STAINLESS STEEL HOSE CLAMP- The 4” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes....
Check Stock

Natural Grass Broom 100% Thai Asian Handmade Sweeper Traditional Vintage Retro Broomcorn Whisk Broomstick for Sweeping + Eco Cotton Dust Cover

  • REDUCE YOUR CLEANING TIME Extra thick bristle brush head makes sweeping hard floors effortless both indoor or outdoors. 100% Eco friendly natural grass intricately bound. Thai Kong Grass is strong yet soft and completely non static, moving dust and dirt with an easy sweep.
  • 100% HANDMADE THAI BROOM Assembled using traditional methods in Thailand. Tightly Bound by hand without the use of any machinery. Each broom is unique and individually hand made by professionals. Taking up to 3 hours to complete. Ideal for cleaning any household, salon or workshop hard floors.
  • 100% NATURAL GRASS harvested from the northern regions and handmade in Thailand. Truly beautiful asian sweeper is comfortable and lightweight. You can leave this broom out and in arms reach ready for use as it easily becomes part of the decor. Looped end for easy hanging and storage.
  • 100% COTTON CALICO DUST COVER Neat and tidy, specially designed cover that exposes your brooms beautiful handle even after use. Calico Cotton is a completely unrefined fabric, unbleached and undyed.
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

2-1/2 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 2.5 inch Turnkey Stainless Steel Hose Clamps

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them..
  • 304 STAINLESS STEEL HOSE CLAMP- The 2 ½” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which ma....
Check Stock

HFS (R) 200Pcs M2 M2.5 M3 M4 Slotted Spring Pin Assortment Kit, 304 Stainless Steel

  • [MATERIAL]: The product is made of 304 stainless steel, corrosion-resistant, durable, rust proof, high tensile strength..
  • [SIZE]: 15PCS M2*6mm(0.236''),15PCS M2*8mm(0.315''),15PCS M2*10mm(0.394''),15PCS M2*12mm(0.472''),15PCS M2.5*6mm(0.236''),15PCS M2.5*8mm(0.315''),15PCS M2.5*10mm(0.394''),15PCS M2.5*12mm(0.472''),10PCS M3*6mm(0.236''),10PCS M3*8mm(0.315''),10PCS M3*10mm(0.394''),10PCS M3*12mm(0.472''),10PCS M4*8mm(0.315''),10PCS M4*10mm(0.394''),10PCS M4*12mm(0.472''),10PCS M4*16mm(0.63'').
  • [EXQUISITE PACKAGING]: The product is equipped with a translucent storage box. The inside of the storage box is evenly divided into multiple storage tanks, which are used to store products of different sizes for easy identification and use.
  • [HIGH PERFORMANCE]: The product is axially slotted and chamfered at both ends to strengthen the positioning, connection and fixation of parts.
  • [WIDE APPLICATION]: It is suitable for various working environment, widely used in automobile, machinery, garage, workshop and power equipment, which can save you a lot of time and money..
Check Stock