Reviews Woodworking Lathes

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

  • 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
  • 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
  • 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
  • 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • ...sion*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasticity sponge*1. These turning tools for wood lathes are great gifts for those who love woodworking.
  • 【Widely Used】The wood turning tools and accessories are very simple turning learning, no need to learn and memorize complicated angles, suitable for all skill levels, lathe tools woodworking or DIY enthusiasts. Whether you are a beginner or an experienced turner, our carbide turning tools can bring you outstanding results.
Check Stock

UOKRR Mini Wood Lathe for Woodworking 8" x 12" Wood Turning Lathe 1/3HP Pure Copper Motor Horsepower Benchtop Lathe Infinitely Variable Speed 750-3200rpm Multifunctional Lathe Machine

  • Powerful Copper Motor: The woodworking lathe equipped with high speed 110V 60HZ pure copper motor support 4500tr/min, 1/3HP provides enough power for all your turning needs with threads measuring in at 1 inches by 8 TPI, MT1 headstock spur center, an MT1 tailstock live center..
  • Infinitely Variable Speeds: This wood lathes with solid structure, runs smooth and quiet, and its very easy to adjust the speeds from 750 to 3200 rpm for your requirement by turning the knob, its a great woodworking Lathe machines fit for beginners or professional woodworkers..
  • Sturdy Construction: The body of this wood lathe made from solid cast iron, with stainless steel handle, strong and rugged construction provides long years of reliable service. Compact and small size design make it ideal for working in a limited space, has the features of high speed of low noise, slight vibration, high durability..
  • Easy & Secure Use: Distance between Centers: 12 in/30.5 cm. Swing over Bed: 8 in/20.3 cm. Face Plate: 6 in/14 cm. You can adjust the distance between centers by moving the tailstock. Two tool rests are included, which could be fixed by a whole steel handle. With elastic protective goggle will protect your eyes during work..
  • Our Service: We provide lifetime free replacement for th....
Check Stock

5FT Power Twist V-Belt 1/2-Inch x 5 Feet A Type, Adjustable Link V-Belt Perfect for Lathes, Table Saws and Other Woodworking Tools (Red)

  • ♛Power Twist V Belt 0.5 inches x 5-feet, Adjustable length, A Type Industrial Transmission V Belt ..
  • ♛Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery,Agricultural Equipment, snow blower,warehouse and packaging system.
  • ♛Special PU linked V belt is made of polyurethane and polyester composites, durable. Well-tested by the manufacturer. The long-lasting upgrade to rubber belts in any power transmission applications..
  • ♛Good performance on reducing vibration & Low elongation than other normal belt. Extremely high strength and low elongation under load results in increased belt longevity and durability..
  • ♛No tools required, easy installation in minutes without dismantling drive system components..
Check Stock

EMILYPRO Sanding Rolls/Plumbing Sanding Cloth 1.5\ x 11yd (33 ft) / Plumber's Double Side Open Mesh/Aluminum Oxide Grit #80-1Roll

  • 【Function】 The sanding rolls is mainly designed for plumbers to remove residue and renew surface appearance for tubed before welding, such as copper, brass, aluminum pipes etc..
  • 【More Usage】The silicon carbide abrasive rolls also ideal for woodworking, furniture repair, automotive body working, fiberglass or metal treatment, paint removal etc, and any other projects which suitable for hand sanding or combine with wood lathes turning spindle to work..
  • 【Advantage】The plumbing sanding cloth is opened mesh, will not load up and clogging.
  • double sided abrasive article on strong mesh provide long lasting.
  • roll size allow flexible cut for multi demand.
  • waterproof and washable ensure reuse, can work in dry and wet condition..
  • 【Kindly Note】Due to the Silicon Carbide workmanship, there will be a few sand falling down during the working process, it's will not affect the working performance..
  • 【Dimension】1-1/2 inch x 10.9yd (3.8cm x 10m) / roll. Grit: #80. Package: 1roll(33FT )..
Check Stock

DCT Abrasive Paper 5pc Sand Paper Variety Pack with Dispenser 150, 240, 320, 400, 600 Grit Aluminum Oxide Sandpaper

  • SANDPAPER ASSORTMENT: Use the DCT | 150-600 Grit Assorted Sandpaper with Dispenser when narrow 1-inch (2.5cm) strips of abrasive sanding paper are needed.
  • Back of each roll is cloth-backed and marked with grit number approximately every 9 inches (22.9cm).
  • FINISH YOUR PROJECT: Ideal for glass sculptures, fine metal jewelry, sanding on lathes, or any detail woodworking projects such as turning spindles, pens, bowls, and moldings.
  • Fabric-backed for longer life than paper-backed or sticky (adhesive) PSA sandpaper.
  • SAVE TIME: Rolls are cut into convenient 1-inch (2.5cm) wide strips.
  • Box includes 5 dispensing slots and 1 built-in sandpaper cutting blade on the bottom edge of the box to cut off a piece of the included sandpaper.
  • Keeps everything neat and tidy so you have less waste.
  • RESTOCK LESS: Each roll is 20-feet (6m) long so you restock less.
  • The included dispenser box has the 5 rolls of sandpaper nicely organized to roll smoothly when you need it.
  • PACKAGE CONTENTS: Package contains (1) roll of each cloth-backed aluminum oxide 150 grit, 240 grit, 320 grit, 400 grit, and 600 grit sandpaper (5 total) and (1) dispenser with sandpaper cutting blade.
Check Stock

5FT Power Twist V-Belt A Type, 1/2-Inch x 5 Feet Adjustable Link A Type V-Belt, Adjustable Link V-Belt Use on Lathes Table Saws and Woodworking Tool

  • Adjustable v belt 1/2-inches x 5-feet fit for lathes, drill press, table saws, bandsaws, woodworking machinery, agricultural equipment, snow blower, warehouse and packaging system..
  • Power Twist V Belt is made of polyurethane and polyester composites, smooth running with less vibration than solid belts, long service life..
  • Power Twist V Belt A Type easy to installation, belts are made to the required length by hand and roll on to the drive without dismantling drive system components..
  • The specification of Power Twist V Belt A Type 1/2-inches x 5-feet, Adjustable v belt 1/2-inches x 5-feet..
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.
Check Stock

TEN-HIGH HSR20 250mm Linear Guide Rail Linear Motion Slide Rails Linear Motion Products, for CNC Routers, 1pcs Rail + 2pcs HSR20CR Blocks Bearing

  • 【BLOCK SIZE】Model: HSR20CR (Pre-loaded).
  • Block fixing bolt size: M5x8 (Please refer to Parameters Picture for more detailed information.).
  • 【ADVANTAGES】Made of quality bearing steel, anti-rust surface treatment ensures high accuracy, durability, hardness and stiffness. With pre-drilled holes, easy to assemble. Smooth running without deflection, low friction coefficient, minimal wear and low noise while using. (Size Can Be Customized).
  • 【APPLICATIONS】This Linear Guide Rail can help build an economical linear guidance system. Widely used for DIY routers, grinding machine, milling machines, lathes, drilling machine, comprehensive processing machines, discharge manufacturing machine, boring machine, line cutting machine, woodworking machinery, handling machine, shipping device, and also suitable for automatic equipment, precision measuring equipment..
  • PACKAGE INCLUDES: 1pcs HSR20 250mm Rail, 2pcs HSR20CR Blocks.
Check Stock

Olafus 50W Led Work Light, 5000LM 2 Brightness Modes Work Light, 500W Equivalent 6000K Adjustable Working Lights, IP65 Waterproof Job Site Light with Stand, for Construction Site Jetty Workshop Garage

  • 50w Work Light: 25w&50w power adjustment switch, equivalent to buying 2 lights, meet your needs for different working scenes. Like car repairing, home remodel, background, photograph.
  • Energy Saving: Our worklights replace 500W traditional halogen bulb. This LED work light is 13.4% wider than others, increasing the wide illumination range effectively.
  • New Switch: You don't have to walk steps to operate the switch, in new design, we moved the switch from the wire to the top of the light back, make it easier to use than the worklight switch on wire.
  • Upgraded Waterproof: With a transparent cover, switch becomes effectively dust and water resistant, improves the safety and reduces the occurrence of electric shock. IP65 waterproof prolongs lifespan to 30000 hours.
  • Widely Used: Adjustable knobs enable you to rotate the shop light by up to 333° vertically and 360° on axis, flexible adjustment angle makes it ideal for construction sites, plumbing, woodworking, lathes.
Check Stock