Reviews Woodturning Clubs

Nova 6050 1-1/2" Multi Project / Duck Call Jaws Jaw Set

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL23 Smoke Arkansas Magnum Double Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • Sound like a flock of mallards ranging from high up to a feeding call.
  • This double reed style takes more air to blow and doesn't have as much range as single reed models (PKGCALL2), however it have a "sweet spot" that sounds more realistic to passing ducks.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Penn State Industries PKEDCSS DuraClick EDC Click Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (5) DuraClick EDC Click Ballpoint Pen Woodturning Kits. You will receive (1) of each in 303 Stainless Steel (PKEDCDST), C3604 Brass (PKEDCDBR), 6061-T6 Aluminum (PKEDCDAL), Burnt Bronze Anodized 6061-T6 Aluminum (PKEDCDBB), and Black Anodized 6061-T6 Aluminum (PKEDCDBAL)..
  • Also includes the bushing set (PKSPCL3BU) needed to make the pens.
  • Features an 8mm single tube design, a Schmidt SKM-88 click mechanism, and a Parker style ballpoint refill. Minimum blank size needed to turn is 3/4" x 3/4" x 3"..
  • The pen end includes a tactical designed knurling which is also featured on the pen tip. The pen clip on all finishes is crafted from raw 303 Stainless Steel..
Check Stock

Penn State Industries PKCP8ARSS Salute The Troops Bolt Action Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) Salute The Troops Bolt Action Pen Woodturning Kits. You will receive (1) of each of the following finishes: Antique Brass (PKCP8ARAB), Antique Pewter (PKCP8ARAP), and Antique Copper (PKCP8ARAC)..
  • Also includes the bushing set (PKCP3000BU) needed to make the pens.
  • Features a single 3/8" tube design, bolt action mechanism, and a Parker style ballpoint refill..
  • Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2"..
Check Stock

Penn State Industries PKGOLFSS Fore Real Golf Click 2mm Pencil Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (4) Fore Real Golf Click 2mm Pencil Woodturning Project Kits. You will receive (1) of each in: Gold (PKGOLF24), Satin Chrome (PKGOLFSC), Chrome (PKGOLFCH), and Gun Metal (PKGOLFGM)..
  • Also includes the bushing set (PKGOLFBU) needed to make the pencils.
  • Features an 8mm single tube design, a precision click mechanism, a sharpener under the tee, and a 2mm lead refill. Minimum blank size needed to turn is 3/4" x 3/4" x 3"..
  • Easy to turn playful little pencil kit uses a real golf tee top to extend the 2mm lead! Use the included tee or use your own tee (maybe from that hole in one shot!)..
Check Stock

Penn State Industries PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit (1pack)

  • This is a woodturning project kit. A LATHE IS NEEDED TO 'TURN' INTO A FINISHED MEASURING CUP SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit.
  • Each set includes the following measuring cup sizes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • Uses bushing set PKABBU. Requires a 7mm drill bit (PK-7MM) and 3/4" x 3/4" x 3-3/8" minimum blank size..
  • Easy to make on a pen mandrel. 'Turn' a must-have kitchen essential. Each set includes four of the most common measuring cup sizes used for cooking and baking.
  • 1/4 cup, 1/3 cup, 1/2 cup, and 1 cup. These cups are plated with durable, food safe stainless-steel inside, and chrome plated on the outside. Easy to hand-wash. The measurements are etched on the side for easy identification..
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000).
  • Also includes the bushing set (PKCP3000BU) needed to make the pens.
  • Features a 3/8" single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2"..
  • Patent No. : US D682, 352 S. Pen blanks are not included. The realistic bolt action handle smoothly advances and retracts to securely lock the refill in place. Each pen kit includes a bolt action rifle clip, a replica 30 caliber cartridge, and a rose gold bullet tip..
Check Stock

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock