Reviews Wood Railing System

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 20Pack 1/8\ Invisible Cable Railing Kit Swageless Lag Screw Cable Genie Tensioner Hidden T316 Stainless Steel for 4\-8\ Wood Posts Deck Stairs CB16, CV1 CG1

  • ...spinning when tightening. Package includes 20packs tensioners, 20pcs loop sleeves ,60pcs jackscrews, 20pcs adhesive sleeves, 1pc drill bit,1pc allen wrench.
  • Swageless and Reusable - With the patent swageless design, you don’t need swaging, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner Solution - With a well-designed compact body, you could use two terminals at one corner post of 4”x4” to 10”x10”, and they won't with each other. It also work on both level and angled sections without angled washers. It is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal areas. (Note: For one post corner solution,CB16 can only apply for the actual size of wood post over 4" ).
  • Pre-Designed System - We pre-designed a CableGenie cable railing system to help you construct a hidden wood system, which includes swageless cable railing kit CB16,1/8” wire rope WR02, adhesive sleeve C....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 60Pack Cable Railing Kit Hand Swage Threaded Stud Tensioner for 1/8" Cable for 2x2 Metal Post Deck Stair Cable Railing Hardware Terminal T316 Stainless Steel Marine Grade CR23, CA6

  • ... If you use the hand swage fitting on the post size less than 2", you can cut off the extra threads with a power cutting tool. If you use it on a wood post, you need to drill a hole with a 1/4"drill bit. Package includes: 60packs tensioner, 1pc 1/4"drill bit, 1pc bent wrench.
  • Level and Angle Installation -This cable railing kit is suitable for both level and angled sections. 30 degree angled beveled washer Muzata CR25 is needed for stairs installation. You can search MUZATA CB15 to find individual end cap nuts to cover this hand swage tensioner to make your cable railing project more unique.
  • Marine Grade- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System- We pre-designed a cable railing system to help you construct a cable railing system that includes everything you need: cable railing post PS01 PS02 PS32, handrail HT10, cable railing tensioner CR23, 30° angle washer CR25, fixed end CR07, adhesive sleeves CR66, protector sleeves CR72, hydraulic crimper and cutter CK12, wire rope WR01, handrail connector HA01, HA02, HA23, HA24. Please note that package only contains contents in bullet point 1. Othe....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

Muzata 1Pc Upgraded Custom Socket Wrench for 1/8' Invisible Cable Railing Kit Fit Muzata CV1 Hidden Turnbuckle Tensioner on Wood Metal Posts for Deck Stair CT16, CT1

  • IMPORTANT to know before purchases – Muzata CT16 is ONLY compatible with 1/8” cable railing kits Muzata CR26,CR36,CR37,CR38,CR52,CB05,CB07,CB24,CB31,CB40. For 3/16” cable railing kits, please search Muzata CT17 to use with. Plus, the socket wrench may already be included in the cable railing kit packages, please check your order carefully in case of repeat purchases.
  • Patent Design – This custom socket wrench is an essential tool to work with Muzata invisible cable railing kits that are designed with a flattened tail. With patent design of the socket wrench, you can clamp the flattened tail of tensioners and hide the ugly swaged end inside the post. Meanwhile, you can get enough tension to pass the 4” sphere test to meet code compliance. Package includes: 1pc socket wrench.
  • Material – Made of spring steel, the socket wrench is durable for long-term use under correct operation. Please check pic 4 and video to find instructions in case of damage caused by the wrong operation..
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden neat-look wood system, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sleeve CR13, drill guide ....
Check Stock

Saiksa Black Cable Railing Hardware, Steel Cable Railing Kit for 1/8" Stainless Steel Cable Railing System, for Metal & Wood Post, Turnbuckle Tensioner and Fixed Terminal 10 Pairs

  • Hidden - With this cable railing hardware, it can be hidden in wooden or metal post railings to give a nice looking cable railing..
  • Cool Black - This cable railing kit is plated with a high quality black coating, which is wear-resistant and durable, will not fade, cool black beautiful..
  • Rust Resistant - These cable railing hardware are made of T316 stainless steel, which is rust resistant and durable for indoor and outdoor use..
  • For 1/8" Cable - This cable railing kit for 1/8" cable railing system, for metal and wood posts..
  • Items Include - 10pcs Turnbuckle Tensioners, 10pcs Fixed Terminals, 1 hex wrench..
Check Stock