Reviews Wood Printing Filament

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Yellow) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Matte Yellow Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Check Stock

YOUSU PLA 3D Printer Filament, White PLA Filament 1.75mm for 3D Printer & 3D Pen, 1kg (2.2 lbs)

  • [ No warping & Good Layer Bonding ] -Yousu 1.75mm PLA filament has excellent first layer adhesion to reduce warping, shrinkage, curl and print failure. Good layer bonding strength makes the printing parts stronger,Less string..
  • [ Purity material & Precision Diameter ] - Yousu 3D Printer filament Produced using 100% virgin Natureworks Ingeo plastic pellet made in the USA, avoid print failure jam or clog and making you a smoothly printing & better surface,this PLA filament comes with +/- 0.03mm tolerance..
  • [ Tangle free & High compatibility] - Total length is 340--350m,1kg 3D Printer filament spool,No tangle winding filament and compatible with the most FDM 3D printers, feed smoothly and constantly without clogging the nozzle or extruder..
  • [Vacuumed Sealed Package ] - Yousu PLA filament was dried and then vacuum packed in a zip-bag which keep your 3d printing filament in a good condition before printing..
  • [ Technical support ] -24 hours customer support with technical advice to make your printing job easily..
Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

JAYO TPU Filament, 1.75mm 3D Printer Filament, TPU 3D Printing 0.5KG Spool, Dimensional Accuracy +/- 0.02mm, Blue

  • 【Soft Filament】JAYO TPU FDM 3D Filament has a shore hardness of 95A, higher softness and tension. It is suitable for printing children's toys, shoes, medical supplies and other product models with good stretchability. JAYO filaments have a wide range of uses and gives you more printing choices..
  • 【 Flexible Filament】 TPU Flexible filament is able to withstand much higher compressive. With 600% Fracture Growth Rate, it can be used to print some strong and stable projects. No worry about fracture.
  • 【Dimensional Accuracy & Less-Tangle】JAYO 1.75mm TPU filament is advanced precisely diameter measuring in the manufacturing process. The dimensional accuracy is +/- 0.03mm. Besides, we use the tidy line which can aviod tangling. And you will get a pleasure printing experience and enjoy yourself totally.
  • 【Clog-Free & Bubble-Free】TPU Printingt filament material is completely dried for 24 hours before vacuum packaging. It can effectively protect the TPU filament from moistur and guarantee clog-free and bubble-free. You won't have any trouble of bubble and clogging and just enjoy your delicate printing.
  • 【Printing Effect& Settings】TPU 3D printing material has bright color and smooth surface and with the Nozzle Temperature : 200-220℃ and the bed: 70....
Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
  • Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
Check Stock

HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange

  • 【PETG Filament - Advantages 】 IEMAI PETG filament combine the advantages of PLA and ABS, it’s strong and durable, with high purity, low shrinkage and excellent adhesion, which makes your printing more delicate. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free..
  • 【PETG Filament 1.75mm - Clarity & Light Transmission 】Color :Transparent blue.
  • Tolerances: +/- 0.02 mm, 1 kg spool (2.2lbs).Our PETG Transparent offers excellent clarity, light transmission (in the translucent colors) and high gloss. NOTE: The light transmission of prints can be influenced by infill, thickness and varying size of printed the objects..
  • 【3D Printer Filament - Vacuum Packaging 】 Completely dried for 24 hours before packaging. IEMAI use vacuum-sealed bag for packaging 1.75mm petg filament to keep the humidity percentage controlled and at a minimum to maintain excellent printing performance..
  • 【PETG Filament 1.75 - No Tangle and Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. IEMAI PETG Spool is more stronger and can achieve very strong and sturdy prints..
  • 【3D Printing Filament - Print Smoothly】No clogging, ....
Check Stock

Suntop Pla Wood Filament 3D Printing Filament 1.75mm , 20% Real Wood Fill Printer Filament, Rohs Compliance, 1 kg Spool, Dimensional Accuracy +/- 0.03 mm Wood Color

  • 【PLA  Filament】 PLA has advantage of no air bubble、no wraping etc. Ensure no clogging、every print with high qulity finish. Fit for complex structure 3D work with high toughness requirement and make sure no brittle during 3D printing jobs..
  • 【High Accuracy 】30-40 times laser scan per second during production, ensure Dimensional Accuracy +/- 0.03 mm..
  • 【Real Wood Fibers】Printed products are more textured . Material will have the look, feel and scent of a wood piece.
  • 【Eco-friendly Material】SUNTOP 1.75mm wood PLA filament is 100% biodegradable & non-toxic. Not harmful  to human  and environment.safe to use.
  • 【Recommend Temperature】Printed Temps 190-220°c.Platform Temp：0-60°c. Match all 1.75 mm-specification 3d printers in the market except chipped filament cartridge..
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock