Reviews With Gasoline

EVIL ENERGY EFI 255LPH Electric Intank Fuel Pump High Flow 43PSI Kit

  • EVIL ENERGY intank fuel pump fit for 12V DC EFI system only..
  • Test flow：255LPH (43PSI), 190LPH (80PSI), Operating Pressure: 15-90 PSI, final fuel pressure set by regulator..
  • Applicable fuel: gasoline, E85 and ethanol gasoline with less ethanol content than E85. (high impurity gasoline will directly affect the pump life).
  • The diameter of 255LpH high-flow INTANK electric fuel pump may be different from the original model, but it will not affect the use.Hoses, filters or other equipment may need to be replaced.Professional installation is highly recommended..
  • EVIL ENERGY provide EFI fuel pump product 6-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

ZKTOOL 11PC Compression Tester, Automotive Engine Compression Tester Adapter Kit, Engine Cylinder Leak Down Compression Test Motor Pressure Gauge. (All Vehicles).

  • Function: The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Meter readings can help diagnose the following problems: stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston..
  • Packing: Including 10 connection adapters --- 11-in-1 engine tester gauge kit including 1 piece spring buckle gauge.
  • 5-piece brass adapter M10, M12, M14, M16, M18, widely used.
  • a 200mm metal Extension rod connector, two 50mm metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread..
  • Application: Gasoline engine cylinder --- equipped with different sizes of rotating and push-in adapters, widely used in most types of gasoline gasoline gas engine cylinders and deep spark plugs, common in motorcycles, lawn mowers, cars, trucks, ATV and many more. Not suitable for diesel engines..
  • Stable quality tester: Maximum 300PSI or 20BAR dual pressure device, with easy-to-read large dial, acrylic glass meter cover with scratch-resistant coating and rubber protective cover with excellent shock absorption performance. The built-in one-way valve with pressure holding function ensures that the pressure gauge obtains the ma....
Check Stock

Dalom 6.5HP 196cc Carburetor Air Filter for Generac GP3250 Generator All Power America Powermate BlackMax DuroMax XP3500 XP4400 MX4500 DuroStar DS4000S DS4400 DS4400E DS4400S

  • Fitment: Generac portable gasoline generator GP3250.
  • All Power America APG3001, APG3002S, APG3008E, APG3012, APG3302C, APGG4000.
  • Powermate 3000/3750 Watt Portable Gasoline Generator Powered by a 212CC Engine PM0103007, PC0103007, & PMC103007.
  • DuroMax PowerMax XP3500 XP4400 XP4400-CA XP4400E XP4400E-CA MX4500 MX4500E 196CC 200CC 6.5HP 7HP Gasoline Generator.
  • BlackMax 3550/3650/4550 Watts Gasoline Generator driven by 208CC/212CC Engine BM903500, BM903650, BM903650RB, BM903655, BM903655D, BM903655DA &....
  • You will get: 1 carburetor, 1 air filter, 3 gasket, 1 fuel line, 1 spark plug.
Check Stock

NIMTEK Carburetor for Champion Power Equipment 3500 4000 Watts Gas Generator

  • Carburetor for Champion Power Equipment(CPE) Branded 196cc OHV engine 3000/3500/4000 Watts Gasoline Generator..
  • Carburetor Fits Gasoline Generator Models:46558, 46561, 46594, 46596, 46533, 46534, 46535, 46539, 46540, 46551, 46553, 46554 & 46555, 40026, 40008, 40012, 46514, 46515, 46516, 46517 & 45633..
  • Carburetor for Honda Gx120 Gx160 GX168 Gx200 5.5Hp 6.5Hp.
  • Honda EM1600X EM1800X EB2200X EM2200X Generator..
  • Carburetor for DuroMax & PowerMax Branded 196CC/200CC 6.5HP/7HP Gasoline Generator XP3500 XP4400 XP4400E XP4400E-CA MX4500 MX4500E ..
  • Package includes: 1 x Carburetor,1 x Choke Lever,1 x Fuel Line, 3 x Gaskets, 1 x Intake Manifold..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • ...ke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a ....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a 360-degree steering function that allows you to reverse the boat without shifting gears.....
Check Stock

VP Racing Fuels Motorsport 5 Gallon Square Plastic Utility Jug Yellow (2 Pack)

  • [Large Capacity] 32 gallons (121 liters) of fuel capacity to store enough fuel for multiple vehicles..
  • [12V Diesel Pump] Easy-to-use electric diesel pump, ready to use when connected to the power supply, with a flow rate of up to 10 gallons per minute..
  • [Easy to Use] The sturdy wheels allow you to easily haul fuel cans over rough terrain, and the heavy-duty handle on top allows you to carry them in a variety of environments..
  • [Excellent Material] The material of the tank body is made of petrol grade polyethylene tuff that can be stabilized and is resistant to corrosion and denting..
  • [Note] This product uses a diesel pump. Please DO NOT add GASOLINE. If there is static electricity, gasoline can easily cause spark combustion and even explosion. Please pay special attention not to use gasoline!.
Check Stock

Kuriyama - K4137-06X400 Kuri Tec K4137 Series PVC Spray Reinforced Hose, 600 psi, 400' Length x 3/8\ ID, Mint Green

  • Recommended anywhere a hardwall hose is required.
  • Recommended for all gasoline blends, diesel, leaded, unleaded gasoline, E15 Ethanol and B-20 Biodiesel.
  • Designed for durability, flexibility and easy handling.
  • All curb pump hose assemblies are 100-percent pressure tested, inspected for electrical continuity and sample pull tested.
Check Stock

Stens 750-760 Alcohol Content Tester, for Testing Alcohol Content in Gasoline, Will Test for E85 and Gas with More Than 10% Alcohol, 2\ Depth x 2\ Width x 4\ Height

  • Economical tool to measure the level of ethanol in e85. Large easy to read label to measure ethanol & water content in gasoline from E60 - E100..
  • Label is laminated to prevent smudging and wear..
  • STEP 1: Fill Bottle with Water to the water fill line..
  • STEP 2: FIll Bottle with E85 gasoline to Gasoline Fill Line..
  • STEP 3: Put on cap and shake well. Let sit on flat surface for 5 minutes and then read ethanol level..
Check Stock