Reviews Wiring Terminal

24 Volt Battery Wiring Harness Kit for Schwinn, GT, IZIP, eZip, & Mongoose Electric Scooters

  • Battery wiring harness kit used to wire two standard 12 volt 10 amp Hour batteries in series on Currie Technologies scooters..
  • 2-prong connector. One black jumper wire, and the main wiring harness included..
  • Connect the red cord to the positive terminal to one battery, and the black cord to the negative terminal on the opposite battery. Use the black jumper wire on the positive and negative terminals in between..
Check Stock

Car Battery Terminals Connectors with 4 Ways Battery Clamps Quick Disconnect Battery Terminal with Hex Wrench Tinned Copper,Positive&Negative Applicated in Car Truck RV etc.

  • 【4WAY BATTERY TERMINALS】This Car Battery Connector Multiple has 4 post for wire connection. Well Designed for multiple cable connections. Wiring is easy to modify. Really Convenient wiring and firm connection. This Heavy Duty Battery Terminals can fit on round post auto batteries SAE/JIS Type A posts..
  • 【POSTIVE & NEGATIVE】 Positive (19mm/0.75in) Battery Terminal Clamps + Negative (17mm/0.67in) Battery Terminal Clamps. The Positive Negative Battery Terminal ends is Suitable for Most Battery models. This Car Battery Cable Ends work great for replacing worn out and corroded terminals..
  • 【DIMENSION】For wires diameters 0.20in – 0.29in (AWG gauges 1 – 4) or section 16 – 35mm². Max wire clamp: 8mm/0.31in. After the Quick Release Battery Terminals installing battery, connects to the battery posts by pressing down the lever, so no tools needed. The Battery Post Terminals do easy to operation..
  • 【HIGH QUALITY】The Battery Terminal Ends are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss..
  • 【WIDE APPLICATION】These Automotive Battery Terminals can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries,RV etc. Just make sure that the Battery C....
Check Stock

Twidec/3Pcs Waterproof Heavy Duty Toggle Switch 12V DC 30A SPST 2 Position 2 Pin ON/Off Switch with Weatherproof Boot Cap Cover for Car Boat with Terminal KL-C101-HMZ

  • Feature: The waterproof toggle switch is made of metal and bakelite.The shaft, bracket and terminal of the switch are made of copper and nickel plating material. The main body of the switch is made of bakelite material..
  • 30A 12VDC；Each terminal will be equipped with a wiring terminal, which makes wiring more convenient..
  • Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles,Total Size(Approx) : 30x15x52mm/ 1.2" x 0.58" x2"(L*W*H).
  • Easy to install: Mounting hole diameter: 12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered.
  • Package content: 3 X toggle switch, 3 X High Quality Waterproof Cover ,6xTerminal.
Check Stock

Hilitchi 12pcs 5 Positions Dual Row 600V 15A Screw Terminal Strip Blocks and 400V 10A Pre-Insulated Terminals Barrier Strip

  • ✅ Product Name: [1] 5P Dual Row Terminal Block Stripe.
  • [2] 12P Fork Type Terminal Stripe. Package Content : 6 x Barrier Terminal Block, 6 x Terminal Stripe (3 x Black,3 x Red).
  • ✅ [Terminal Block Stripe] 600V 15A, Material : Copper, Plastic. Our dual row screw terminal strips has a clear cover to protect accidental touching of the terminal. The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surface. Safer when they are protested by the sell..
  • ✅ [Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC. With our terminal block, no more cluttered battery terminals anymore. Our terminal strips are well made sturdy and with quality and robust screws..
  • ✅ [NEAT WIRING JOBS]- The terminal blocks are easy to install and held in place by two screw holes at either end of the terminal. Bonus standard spade crimp type connectors work well and you have many options of of making individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line..
  • ✅ [QUALITY AFTER-SALE SERVICE]: If you do not satisfy with our products or any questions, please come to us anytime. 12 hours quick response service. We promise to offer a satisfactory solution to all your problems..
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

279816 Thermal Fuse & Thermostat Kit & 3977767 High Limit Thermostat & 3387134 Cycling Thermostat & 3392519 Thermal Fuse Cutoff Kit for Whirlpool & Kenmore Admiral Maytag Amana KitchenAid

  • Package Included: 1 x 3977767 High Limit Thermostat, 1 x 3387134 Cycling Thermostat, 1x 3392519 Thermal Fuse, 1 x 279816 Thermal Fuse & Thermostat Kit, 1 x Instruction Sheet..
  • ✅ 3977767 Dryer high limit thermostat – pushes onto the terminal of the heating element. Has one 1/4″ male terminal, 1/4″ female terminal, and one 3/16″ male terminal..
  • ✅ 3387134 Dryer cycling thermostat with internal bias heater – L155-25 (opens at 155F and closes at 130F). 3392519 Dryer non resettable thermal fuse – two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
  • ✅ 279816 Dryer thermal fuse (thermal cut-off) 309 degrees and high limit thermostat 250 degrees kit – Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element. Includes thermal fuse, thermostat, screws, wiring kit, and instructions. Make sure to check your dryer vent for any restrictions..
  • ✅[Replaces Part Number]: High Limit Thermostat 3977767 WP3977767 3399693 898078 AP3131941 PS351925 EAP351925, Cycling Thermostat 3387134 WP3387134 ET187 3387135 33....
Check Stock

Multi-Mile Matrix Tour RS 175/70R14 84T BSW

  • [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify..
  • [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize..
  • [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity..
  • [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need..
  • [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal cleaning brushes, 2 battery anti-corrosion washers and a hex wrench. Please feel free to let us know if you have any concerns or questions about our products, our customer service team....
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

TP-300-A Terminal Test Probes Kit - an Affordable Alternative to EL-35616-300-A, 35616, J-35616

  • Yoursme Terminal Test Probes Kit designed to properly test electrical and computer circuits used in GM vehicles, without damage to the terminal ends of the connector being tested..
  • Application -- The TP-300-A Probe Kit includes the most popular probes and components that are required to service majority of current GM vehicles glo.
  • Test, Don't guess -- Great for checking terminal tension. The J-35616 Terminal Probes are the tools of choice for wiring and electronic component diagnosis..
  • Benefits -- Includes sturdy plastic box. Well engineered to support proper diagnosis and will not damage terminals or harnesses..
  • Replacement -- A less expensive option to the complete J-35616-F kit. EL-35616-300-A..
Check Stock