Reviews Wire Terminal Fuses

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock

Power Wheels Adapter for Dewalt 20V Battery Adapter Power Wheels Battery Converter Kit with Fuses & Wire Terminals, 14AWG Wire, Power Connector for DIY Rc Car Toys, Robotics and Rc Truck Adapter Set

  • ...le for high power applications.Working Voltage:5V-150V.
  • Compatibility: Power Wheels Adapter Compatible with 18V/20V Lithium-Ion battery. Easy to install and locks on your battery. Package includes 1 pack power wheels adaptor, 1 pack Wire Terminal, 1 pack Switch, 1 pack inline fuse holder and 3 pack 30amp blade fuses.
  • Enjoy the DIY: The power wheels battery conversion kit is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the wire of the adapter. You can make the 18V/20V batteries power your other devices, enjoy fun of the DIYour customers with the best buying experience.
  • Best Warranty: If you have any questions after receiving the product, please do not hesitate to get in touch with us, we will provide our customers with the best buying experience.
Check Stock

Upgraded Power Wheel Adaptor for Ryobi 18V Battery with Fuse & Wire terminals,Power Connector for Rc Car, Robotics,Rc Truck, DIY,Work for 18V P100 P102 P103 P107 P108 Li-ion & Ni-CD Battery

  • Ensure safety: There are 30A fuses on the positive and negative electrodes of the adapter to prevent excessive current from damaging the battery and power equipment..
  • Widely compatible: suitable for Ryobi P100 P102 P103 P104 P105 P107 P108 P109 Li-ion & Ni-CD Battery. Easy to install and can lock the battery well..
  • Convenient wiring: the product contains wiring terminals, which is convenient for connecting the positive and negative wires of the device to one end of the terminal, and then connect the positive and negative wires of the adapter to the other end. Make sure that the positive and negative electrodes are in correct contact..
  • Multifunctional use: The power wheel adapter is installed with 12.5 inches of Awg14 wire.
  • you can use it to upgrade your power wheels, remote control toys, robot DIY, etc. The product comes with 5 spare fuses for easy replacement later..
  • Important reminder: Please make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If you don’t use it for a long time, please be sure to remove the battery from the adapter. If you don’t understand anything, please feel free to contact us customer service..
Check Stock

Electop 6 Way Fuse Block Blade Fuse Box with Negative Bus 6 Circuit Fuse Holder Fuse Block w/Negative Bus Waterproof Protection Cover Sticker Labels for 12V/24V Automotive Car Truck Boat Marine RV

  • ★【NEW DESIGN 6 WAY FUSE BOX】Electop 6-Way Blade Fuse Block accepts 1A to 20A ATC/ATO(middle size) fuses. It has positive and negative sides, which means that each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel..
  • ★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any cir....
Check Stock

EWK 12 Pcs Universal Automotive Wire Electrical Terminal Release Connector Removal Tool Set

  • 【 Easy to Use 】Effortlessly removing terminal wires from the wire harness connector and adding a new wire. No need to pry open the terminals, just push and pull the terminal pins. Maintain the factory original harness and plug in your own electronic device without any damage..
  • 【 Package Include 】12 pcs different types of car plug terminal extraction repair tools. Red handle for GM : Spring Loaded Tube*1, Square Blade*1, Flat Blade*2, Fork Blade*1, Screwdriver*1. Green handle for wire terminal: Tube*4, Flat Twin Blade*2..
  • 【 Considerate Design 】Color coded provides the user a visual clue to works faster. The knurled surface provides a secure, non-slip grip during use. It is light weight, compact shape, and coming with blow-molded case, easy to storage and carry..
  • 【 Wide Application 】This terminal release tool set works on almost all vehicles that has electrical terminal and cables, enables for an effortless disconnection even on hard to reach places..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Vignee 82 Pcs Terminal Removal Key Tool, Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal with a Protective Bag

  • Terminal Removal Key Tool, with a Protective Bag.Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal..
  • Effortless Terminal Removal: The Terminal tool no need to pry the terminals! just insert our tool, push and pull the terminal pins for removal. Our tool provides extra leverage so you can easily remove the wire.The terminal pin back set is the most convenient line inspection and removal kit..
  • High Quality：The Pin extractor tool made of premium steel spring plate + plastic. It is flexible and durable.The width of the pin can be manually changed and it would restore its original shape..
  • Easy and Safe to Use: It is easy to remove the terminal wire from the harness connector and add a new wire without any damage.Easy to use, you can maintain the factory original harness and plug in your own electronic device without any destroying..
  • Wide Compatibility: These terminals removal tools are common tools for most connector terminals, suitable for most cars, such as:motorcycles and other electronic devices like household appliances..
Check Stock

Power Wheels Adapter for Milwaukee Battery M18, 18V Power Wheels Battery Conversion Kit with Fuse Holder and 3PCS 30Amp Fuses UIInosoo for DIY, RC Toys and Robotics, Red

  • ...erpowers protection. Waterproof fuse holder rubber cap fits on tightly to protect blade fuse inside. Heat-resistance 14 AWG wire is suitable for high-power batteries..
  • Package includes 1 pack power wheels adaptor, 1 pack inline fuse holder and 3 pack 30amp blade fuses. Note: The red wire is connected to the positive terminal, and the black wire is connected to the negative. When using, the two wires shouldn't be in contact. If the power wheel adapter not be used for a long time, please separate it from the battery..
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock