Automatic Electric Wire Stripper Machine 0.06'-1' Wire Stripping Machine 180W Automatic Wire Strippers For Recycling Scrap Copper Wire
- 【STRONG MOTOR】-Comes with power 180W, single phase 1/4HP 110V 60HZ. With solid aluminum alloy, this wire stripper can last for years and withstand rigorous environment.
- 【SHARP BLADES】- Sharp blades with stripping speed: approx. 60 feet per minute. Different sized feed holes are suitable for most of wires. Wire gauge range: 0.06” to 0.98” diameter.
- 【PORTABLE & CONVENIENT】- The wire stripping tool is designed with hand cranks and drill driven technologies, this electric wire stripping machine is easy to operate. Measured at 9.6" x 12.6" x 12.6" and weighing merely 30 lb for portable and convenient to use.
- 【HEAVY-DUTY GEARBOX】- Leads to fast stripping speed, fixed machine position, safe and reliable use. Fast start and stop buttons protected by plastic cover to be energy saving.
- 【WIDE APPLICATIONS】- Perfect for recycling copper wire, removing the plastic and rubber insulation from undamaged scrap wires, range including 0.06" to 1" diameter cables.
Check Stock
VEVOR SWT508-JE Automatic Wire Stripper Machine 0.1-8 mm², Computer Sheathed Wire Cutting and Stripping Machine Hard Tungsten Steel Blade, Wire Stripping Machine Four Wheel Drive
- Cutting Tolerance: ±(0.002*L) mm. The wire stripper machine is great for you, who may have a lot of wire to strip. With an LCD on the top, you can set values to get precise and fast cuttings..
- Optional Stripping Degree: Wire can be fully or partially stripped, or even stripped in the middle, as you wish, for the easier pressure welding process and multipole connection..
- Simple Operation: The electric wire stripping machine features a micro-computer designed to take steps of the stripping process as programmed. It saves you plenty of time you might spend on trifles. You need to set the numbers, and then it takes over..
- Tidy The Mess Up: It is equipped with a wire straightener, setting the wire in order before slipping it into the inlet..
- Wide Application: The scrap wire stripping machine is the perfect choice to deal with wires of various types, including PVC, Teflon, silicone cables, glass fibers, etc. And it is widely used in the electronics industry, electrical industry, motors industry, and so on..
Check StockMultifunctional Wire Stripping Pliers Electrician Special Pressing Repair Line Mult Cable Decrustation Peeling Tool Cutting
- ➤Precise peeling hole design. When stripping, the cut of wire skin shall be neat and the core shall not be easily damaged..
- 2. It is made of high-quality alloy steel, with overall heat treatment, high hardness, sharp cutting edge, strong shearing force and durability..
- ✂️【Multifunctional Wire Stripper Tool】Use it for stripping, cutting of copper wire, aluminum wire, sheathed core wire, cable, cutting bolts and insulated terminal electrical crimping..
- 5. Suitable for thin cable, wire stripping, cutting, etc..
- ✂️【Comfortable Handle】Handle is made of non-slip PVC material, gives you a comfortable grip experience. Textured grip handles for maximum comfort and reduced hand fatigue. You can grab, hold, pull andouter jacket makes clean cuts on wires with only one hand..
Check StockKlein Tools 11061 Wire Stripper / Wire Cutter & 11055 Wire Cutter and Wire Stripper, Stranded Wire Cutter, Solid Wire Cutter, Cuts Copper Wire
- Product 1: Wire Stripper with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, and 12/2 and 14/2 Romex cable (all sizes) and other nonmetallic (type NM) sheathed cable.
- Product 1: Adjustable stopper to control the length of the core strip.
- Product 1: Tensioning thumb wheel allows for precise stripping of smaller gauge wire.
- Product 1: Convenient wire cutter in handle.
- Product 2: Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 shears.
- Product 2: Precision ground stripping holes.
- Product 2: Strong-gripping serrated nose for easy bending, shaping, and pulling of wire.
- Product 2: Holes for looping and bending wire.
Check StockMoroso 73233 Spark Plug Wire Set
- Blue Max Spiral Core Universal Fit Wire Set, Black Wire, Unsleeved, HEI & Non-HEI, 135 Deg. Boots, 8 Cylinder Engines.
- Moroso Blue Max Universal Fit Wire Sets are terminated at the plug end only, and include enough wire length and terminals to fit HEI or Non-HEI distributors. A coil wire is included when required. There’s even a wire stripping tool to simplify the termination. And like all Moroso Blue Max wire, each is individually tested for unsurpassed quality control..
- Terminals and boots are factory installed on the spark plug end of the wire.
- Includes Moroso Wire Stripping Tool for quick and easy installation.
Check Stock
Happybuy Manual Wire Stripping Machine 0.06-0.98 inches, Wire Stripper Machine with Hand Crank Portable, Wire Stripping Tool Aluminum Construction,for Scrap Copper Recycling
- Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
- Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.
- Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire.
- Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom.
- Wide Application: This machine is automatic and the wire range is up to 25mm，widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.
Check Stock
VCELINK Automatic Wire Stripper and Cutter, Professional 2 in 1 Adjustable Electrical Cable Wire Stripping Tool&Eagle Nose Pliers (7-Inch)
- ➤【Multi-Function Wire Stripper】Made of special manganese steel.Perfect for industrial and daily use.3 in 1 Wire Stripping Pliers for Wire Stripping, Cutting, Crimping.Specially designed and precisely-machined toothed grapple can grip tightly and easily trim wires.
- ➤【Universal Capability】Manganese steel jaws Has super hardness (HRC36-42),suit for the wire of the specification 24-10 AWG (0.2-6.0 mm).Crimp-insulated terminals: Suitable for 22-10 AWG (0.2-6 mm).Non-insulated terminals: Suitable for 12-10 AWG (4-6.0mm) / 16-14 AWG (1.5-2.5 mm) / 22-18 AWG (0.5-1.0 mm).Crimp Auto Ignition Connections: Suitable for 7-8 mm.
- ➤【Strip Multiple Cables】For striping the plastic or rubber insulation of the single, multiple cables and wires of 0.5-6 mm.For cutting and stripping wire and cable .Stripping force adjustment knob design can adjust flexibly according to wire diameter. You can adjust the knob appropriately according to the size of the wire to ensure that the wire stripper has the most suitable tension to strip the cable protective jacket.
- ➤【TPR Confort Grip】Thermoplastic rubber (TPR) grips provides maximum leverage,which make maximum effect can be achieved with minimal force.At the same time, At the same time, thermoplastic rubber can ....
Check StockKlein Tools 44201 Electrician's Pocket Knife
- Wire stripping notches on blade, stripping sizes 14-10 AWG.
- Satin 440A stainless steel drop point blade.
- Anodized aluminum handle for corrosion resistance.
- Liner lock secures blade in open position.
- Pocket clip keeps knife readily available.
- Great for stripping wire, splitting cable and performing everyday tasks.
Check Stock
WORKPRO Wire Stripper Set, 8-Inch Multi-Tool Stripper and 8-Inch Self-Adjusting Wire Stripper Set for Stripping, Cutting and Crimping
- 【8-Inch Self-adjusting Wire Stripper】 Features with 3-in-1 multi-functions: stripping, cutting and crimping. With innovative self-adjusting mechanism, the conductor can be reliably stripped by adjusting the accuracy of cutting blade, which is ideal for copper and aluminum cables from 10-24 AWG.
- 【8-Inch Multi-Tool Stripper】 Induction hardened cutting edge stays sharp longer, pliers style nose allows wire stripper to pull and loop in wire, wire crimper crimps insulated and non-insulated terminals.
- 【High-Quality Material】Made of high-quality steel which is heat treated, polished, and black oxidation processed, making it more durable and sufficient to deal with hard stripping work.
- 【Set Includes】One piece of 8-inch self-adjusting wire stripper and one piece of 8-inch multi-tool wire cutter.
- 【Wide Applications】Ideal for industrial, electrician and domestic use. It is suitable for stripping, cutting, and insulated terminal crimping of copper wire, aluminum wire, sheathed core wire, cable, multiple sheathed wires, bare terminal.
Check Stock 
