Reviews Wire Marker Booklet

Partsam Replacement for Freightliner Century/Columbia Led Lights Kit Clear, 5x Rectangle Amber LED Cab Roof Top Clearance Marker Lights+2x 5-7/8" Teardrop Sleeper Amber Clearance Marker Lights

  • Partsam 5 Pcs Set High Power Amber 6 LED Amber Cab Roof Marker Lights + 2 Pcs Amber 15 LED Side Turn Marker Lights For Freightliner Century/Columbia ( Clear Set).
  • Application: Trucks, trailers, tractors, semi-trailer, Dump Truck, special vehicle,etc.(Specially for Freightliner Columbia or Freightliner Century ).
  • For the Cab Marker Roof Top Clearance Lights: Size: 115mm x 57mm x 16mm (4.5" x 2.25" x 0.63").
  • For the side turn marker lights: Hardwired with 3 wires. 6"L x 3-1/3"W x 2-1/2"H approx. 12 volt. Surface mount design, mounting holes are 4.85" apart..
  • EASY TO INSTALL -- Side Turn Marker: 3 Wires Connection: Black is Negative, Red is high brightness, White is low brightness.
  • Cab Marker: White wire is the Negative and Black wire is the Positive..
Check Stock

Partsam 8pcs 2.5" Oval Side Fender Marker Light Red/Amber Clear Lens Universal Surface Mount LED Light, Truck Boat Trailer Sealed Mini Trailer Led Marker Clearance Identification Lights 2 Diodes

  • Partsam (4Red+4Amber) Clear Lens 12v DC Side Marker trailer Light Mini-Sealed LED Surface mount design.
  • These are universal.Generally people use them as clearance, side marker or identification light. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. Also some put them on motorhome as position lights ....
  • Brightness: 80 lumen each light with 2 pcs High Quality LED Diodes.
  • Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc..
  • Easy to install with Free end wire ( Black is Positive: White is Negative/ground ).
  • the wires come out of the back of the light.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • 64mm x 26mm x 18mm (2.54" x 1.06" x 0.7").
  • the center to center dimension between the screw holes: 46mm (1.8").
  • Partsam is one of the largest automotive aftermarket marker lights providers in North America. You can find all the marker lights you need in Partsam!.
Check Stock

Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V

  • Partsam 14 Pieces 6.5 inch amber 16 diode LED marker lights - Amber Lens. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps.
  • These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
  • Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
  • can be function as marker light, clearance lights, turn signal lights.
  • fits in a combo-style hole and Chrome bezel hides mounting screws.
  • sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
  • Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a ....
Check Stock

Partsam 30Pcs 3.8

  • 3. When you wire several lights together, you can wire them in parallel.
  • Light Size: 75mm x 20mm x 5mm (2.95″ x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
  • Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • As every truck lamp come with two wires, they can only use as one function a time.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
Check Stock

Linkstyle 10pcs 6LED Trailer Marker Lights, 12V-24V Amber/Red Surface Mount Clearence Light, 2.5 inch Waterproof Sealed Side Marker Indicators Light for Front Rear Trailer Truck RV Camper Boat

  • UNIVERSAL FUNCTIONS: These trailer marker lights surface mount design for side marker lights, clearance lamps, roof lights and identification light.
  • Universal fits 12V-24V vehicles like trucks, trailers, RV, campers. (Note: Please install on a smooth surface. The actual size of the product will be different from the picture, please check the specific size of the product before buying).
  • HIGH BRIGHTNESS: Each upgrade marker light is built in 6 diodes. Output ultra-bright red or amber light which reflecting clearly lights around in the dark to warn the upcoming car to reduce accidental ricks.
  • EASY INSTALLATION: Two-wire design which comes out from the center of the light including both lead wire and ground wire for easy to mount to all surfaces and fixed by the screw on both sides.
  • (Note: different color light: the amber light with yellow & black wire, Black is Negative while Yellow is Positive.
  • the red light with red& black wire, Black is Negative while Red is Positive).
  • IP67 WATERPROOF: Sealed & waterproof assemblies.
  • IP67 waterproof clearance light can be ready for a different kind of weather attack, dust, dirt, snow and other impacts of inclement weather, which alerts other vehicles to avoid accidents..
Check Stock

Nilight TL-14 10PCS 3.8” 6 Amber Indicator Rear Side Truck Trailer RV Cab Boat Bus Lorry LED Marker Clearance Light, 2 Years Warranty

  • Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LEDs, outputs excellent bright 120LM light for perfect marker light..
  • Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount..
  • Simple Installation: 2 wire connection, yellow for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided.
  • Peel and stick the foam tape to the light.
  • Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides..
  • Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light..
  • Package Include: 10 Pack of amber side marker light, include hardware pack and foam tape base..
Check Stock

10Pcs 2 Inch Round LED Side Marker Clearance Lights for Trailers, 5 Amber and 5 Red Sealed 2 Round LED Trailer Marker Lights 4 LEDs w/Rubber Grommet Flush Mount 2 Wire Pigtails Truck RV Waterproof

  • This listing features for 5 Pieces red 2 inch round led marker lights and 5 pieces 2 inch amber Round Trailer LED Clearance Marker Lights. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails.
  • These 2 round led marker lights include grommets and pigtails for complete installation.
  • Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
  • Sonically sealed, IP65 waterproof housing and lens unit is submersible.
  • Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: White is the negative and black is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
  • These 2 Round LED Light Side Marker Clearance lights are universal for almost all 12v dc vehicles like Truck, Trailers,Pick Up,UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side mar....
Check Stock

iJDMTOY Carbon Fiber Style Amber/White Switchback Full LED Side Marker Light Kit Compatible With BMW 1 3 5 Series X1, w/BMW F10 Style, Replace OEM Sidemarker Lamps

  • Compatible with BMW 1 Series: E81/E82/E87/E88 128i 135i 1M, 3 Series: F30/E90/E91/E92/E93/E46 M3 CSL 325i 330i 328i 335i M3, 5 Series: E60/E61 525i 528i 530i 535i 545i 550i M5 as side blinkers.
  • One pair (driver and passenger sides) "carbon fiber" pattern cover black/dark smoke lens front LED side marker lamps (Replace OEM # 63-13-7-253-325 63-13-7-253-326).
  • Each piece is powered by 36 high power amber SMD LED diodes form a perfect focal strip with a super bright lighting output.
  • Direct fit installation, give your ride a modern and dynamic LED appearance with enhanced safety & visibility at night (To install: plug into the stock side marker light socket w/ additional optional red wire to enable the xenon white LED side marker light feature, simply connect this red wire to ACC 12V+ or tap to the original angel eye ring marker bulb's positive wire).
  • Installation Tip: 1) Remove the OEM side marker.
  • 2) Clean the surrounding area, since there are a lot of dirt, and wait until the surface is dry before installation.
  • 3) Connect the LED side markers to the stock harness, test the LED light first.
  • 4) Peel off the backing of the double-sided tape on the back of the LED side markers.
  • 5) Install it back and apply pressure again the surface for 30 seconds to let it co....
Check Stock

Partsam 2pcs 6" Amber LED Rectangle Tail Stop Marker Light Trailer Truck RV 3 Wires 21LED, 6x2 Rectangular Led Clearance Lights, 2x6 Big Side Marker Lights

  • Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check Stock