Reviews Wide Belt Panel Sander

Band Saw Drive Belt Fits - 9 inch Ryobi BS904G Band Saw - High Strength Rubber Belt - Replacement Drive Belt - Made in the USA - Motor Ribbed Drive Belt

  • HIGH-GRADE ENGINEERED RUBBER : Thanks to fiber-rich compounding and outstanding consistency, each DNLK rubber bandsaw, sander, poly V, planer, sharpener, compressor belt and drill press replacement drive belt will outlast and out perform ordinary rubber drive belts..
  • LIFETIME ASSURANCE : All our bandsaw, sander, poly V, planer, sharpener, compressor, drill press accessories, including ribbed drive belts, cog drive belts, and band saw wheel rubber are backed by top-notch service and EVERLASTING commitment..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drive belts have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • MADE IN THE USA : Every single motor drive belt is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth drive belt replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drive belts are compatible with most brands. Order our high-strength rubber belt and profit from reduced downtime and maintenance..
Check Stock

Band Saw Drive Belts Set Fits - 9 inch Ryobi BS904G Band Saw - High Strength Rubber Belts - Replacement Drive Belt - Made in the USA - Motor Ribbed Drive Belt

  • HIGH-GRADE ENGINEERED RUBBER : Thanks to fiber-rich compounding and outstanding consistency, each DNLK rubber bandsaw, sander, poly V, planer, sharpener, compressor belt and drill press replacement drive belt will outlast and out perform ordinary rubber drive belts..
  • LIFETIME ASSURANCE : All our bandsaw, sander, poly V, planer, sharpener, compressor, drill press accessories, including ribbed drive belts, cog drive belts, and band saw wheel rubber are backed by top-notch service and EVERLASTING commitment..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drive belts have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • MADE IN THE USA : Every single motor drive belt is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth drive belt replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drive belts are compatible with most brands. Order our high-strength rubber belt and profit from reduced downtime and maintenance..
Check Stock

GALAX PRO 8 Amperes Belt Sander 120-380RPM with Variable Speed Settings 5 Pieces Sanding Belts 3x21 Inch and Dust Bag for Stock Removal

  • This belt sander has a powerful 8 amperes motor, making it ideal for sanding large areas such as floor boards, decking and completing other tasks that....
  • The sander tool is equipped with speed adjusting dial for optimum belt speed to suit various work pieces and an auto tracking belt system to track the....
  • Long cable for sanding runs and complete with a dust bag for a cleaner work environment.
  • It has a lock on button for continuous operation.
  • Grinding belt: 76 X 533 millimeter . Grinding surface: 75 X 170 millimeter.
  • Includes 5 sanding belts in total, which is P80 grits.
  • 5 pieces P80 grits sanding/Grinding Belt.
Check Stock

BUCKTOOL BD4801 Bench Belt Sander 4 in. x 36 in Belt and 8 in. Disc Sander with 3/4HP Direct-drive Motor

  • POWERFUL MOTOR: The belt and disc sander is directly driven by the motor shaft, 3/4 HP High Power Motor and 3450 RPM Disc Speed provide efficient and stable output.
  • FLEXIBLE BELT: This belt of the benchtop belt sander is 4x36-inch and 80-grit, and it can be placed horizontally or vertically to meet various needs, the cast aluminum worktable can be tilted 0-45 degrees, this makes this machine better suitable for all kinds of woodworking jobs.
  • STABLE DISC: The diameter of the disk is 8-inch, a heavy steel cover is added to prevent the disc from shaking. There is a miter gauge appliable for fixing the angle of the wood, and the cast aluminum work table also can be adjusted.
  • PROFESSIONAL DESING: Combining decades of woodworking experience, we have created a machine that is more suitable for users. 2 work tables for both disc and belt, 2 dust ports allows a dustfree operation when connecting with a dust collector, and sturdy cast aluminum base with rubber foot prevents vibrations.
  • MAINTENANCE FREE: This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before, but if you want to sharpen metal, change the sanding belt/disc then you will be good to go.
Check Stock

Knife Sharpening Angle Guide fits 1X30 Belt Sander with Assorted 5 Pack of 1X30 Sharpening Sanding Belts

  • Knife Sharpening Angle guide fits most common 1x30 Belt Sanders. Like the Harbor Freight Central Machinery. Along with your Knife Sharpening Jig you....
  • The Knife Sharpening Angle guide fits securely onto the 1" Platen of your belt sander with a Spring Clip. This allows incredibly easy installation and....
  • Knife Angle References are marked from 10 Degrees to 45 Degrees. You can sharpen a wide variety of tools and blades while maintaining an accurate....
  • The design of the Knife sharpening angle guide allows you to change belts on your 1x30 Sander without removing the guide. Allowing you to maintain an....
  • The Assorted starter Pack of 1x30 Sanding Sharpening Belts includes 5 belts in total. Each one is a different grit. Included with the Angle guide is....
Check Stock

TACKLIFE Classic Belt Sander 3 ×18-Inch with 13Pcs Sanding Belts, Bench Sander with Variable-speed Control, Fixed Screw Clamps, Dust Box, Vacuum Adapters, 10Feet(3M) Length Power Cord - PSFS1A

  • Comes with 13pcs sanding belts, 7 x 80grits, 6 x 120 grits..
  • ▲【2 In 1: Bench & Belt Sander】 Equipped with two metal screw clamps, Tacklife belt sander can be turned over and fixed to table, acting as a bench sander, lock-on button helps to free your hand, providing more convenience and flexibility..
  • ▲【13Pcs Sanding Belts】 Come with 6pcs 120 grit and 7pcs 80 grit aluminum oxide sanding belts, saving your money, meeting the requirements for your different projects. Metal clamping lever for easy and quick sanding belt change..
  • ▲【Power & Variable-Speed Design】5 Amp motor offers great power to the sanding surface, delivering efficient removal and high quality finish. Variable-speed knob with 6 dials enables you to match the best speed to the application from 0-560rpm..
  • ▲【High Performance Dust Collection System】The dust collecting box is detachable, can be easily installed and removed, easy to clean dust. Two vacuum dust adapters, 32mm and 35mm make it possible to connect your vacuum cleaner, reaching the perfect dust collection effect..
  • ▲【Notes & Full Package】When meeting the problem that the belt slipping, adjust the screw at the bottom to a proper position, then the belt will run in track. Full package: Tackl....
Check Stock

Makita 9403 4 X 24 Belt Sander Renewed

  • Quietest belt sander in its class: only 84 decibals.
  • 4 inch wide belt with a speed of 1,640 feet per minute for fast material removal.
  • Labyrinth construction seals motor and bearings from contamination.
  • Large front grip is positioned for operator comfort. Variable speed control dial : No.
Check Stock

2X42 Super Strop Leather Honing Polishing Belt For 2X42 Belt Sanders (2X42 Leather Belt)

  • 2X42 Super Strop Leather Honing Polishing Belt Super Strop Leather Honing Stropping Belt is fantastic addition to sharpening with a 2X42 Belt Sander. Not only can you use this Leather Strop as the last stage of sharpening, but you can also use it to maintain an edge in between sharpening..
  • Premium Made in USA Buffing compound and brief instructions included. The White Buffing compound is an ultra fine abrasive that is specifically designed to be applied to the Leather Stropping Belt. The buffing compound will help to refine the edge of your knife, removing very small fragments of the Burr or Wire Edge. Removing these fragments can extend the life of the edge..
  • 2 in. X 42 in. Super Strop Leather Honing Belts are made slightly short and may require stretching to be installed. If you believe your belt is too small, Contact us today! We strive to provide the best customer service & support!!.
  • Sharpening with professional results has never been easier on a 2×42 inch belt sander. Fits Popular belt sanders the Harbor Freight, Wen, Rikon and nearly every other 2X48 sander..
  • SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects & User Error. If your Leather Honing Belt o....
Check Stock

24 Pcs 1/2 Inch x 18 Inch Sanding Belts Set, 4 Each of 80 120 240 400 800 1000 Grits, Replacement Belts for Air/Electirc Belt Sander, Best for Woodworking, Plastics, Fiberglass and Metal Polishing

  • The belt size is 330*10mm and the machine size is 175*110*140mm. Accessories: 10pcs belt, 5pcs wrench. The mini belt sander also equipped with 7 speed adjustment, you could adjust the speed you need, very convenient..
  • The eccentric adjustment wheel is designed to adjust the verticality of the belt. The belt adjustment wheel has a spring structure that automatically adjusts the tightness. The table angle is also freely adjustable..
  • Built-in double bearing, non-slip, while avoiding dust entering the inside of the machine and damaging the bearing. The base is solid and sturdy and can be placed on the table for effort..
  • This belt sander adopts special noise reduction design, the noise is 75-85 db, can protect the ears of operators and people around..
  • The belt sander is CNC machined with high precision. Made of high quality metal, it is not easy to rust, wear and wear, and has a long service life. Suitable for grinding metals, wood, acrylic and other materials..
Check Stock